Hi all just wondering would any of you know would a low profile card word with high profile cause the card will not screww in if you know what mean my motherboard is a p5lp-le the operating system is vista 32 bit spec of the card is : Chipset: Moschip9820 , 9865 ---------------------------------------------------------- Bus Interface: PCI bus 32 bit ---------------------------------------------------------- Features: * Supports up to 16550 Fast Uart serial port * Easy Plug and Play installation * Automatically selects IRQ & IO address * Supports IRQ sharing * Built in 16C550 compatible UART with 16byte transmit-receive FIFO * Serial transmission rate up to 115200bps. * Multi card capability - allow for upgrade with additional serial or parallel cards ---------------------------------------------------------- OS Supports: Windows 98SE/ME/NT4.0/2000/XP, DOS, Windows Vista 32-bit and Windows Vista 64-bit please ask any question thanks
Many times you can make a new full-height/normal profile bracket out of an old slot cover. This can be attached to the card by the screw-standoff-things on the sides of the serial port. Just be carefull cutting...it is much easier to cut more off later than to try to add more when you have already cut too much.
Hey guys cheers for getting back to me. Thanks a lot I went ahead and install the pci card it works but was creatively fitted lol.
no problem. had to do that with a full size bracket dialup modem into a thin ibm desktop. hacksaw, vise & a file plus a screwdriver.
I've had to do it when I didn't look closely when ordering a GFX card for a customer...no full-height bracket...time for the dremel!
