Subscribe to AfterDawn's weekly newsletter.
LG burner and fujitsu dvd+R DL's failed 5 times straight
#1
03 Sep 2010 @ 2:34
evil99019
Send private message to this user
Newbie
does any one use LG GSA H55N to backup any xbox 360 games on dual layer discs? my firmware was just flashed to 1.05 which was lastest one from 2008. but flashing to the latest firmware still doesn't work.
I failed to backup fujitsu dvd+r dl's because of spindle servo failure.
just bought the 15 pack, 5 discs wasted just to backup the same game, still not a single success
are fujitsu dvd+r dl's really that bad or my burner is just that outdated?
# EDIT
so it appears fujitsu outsourced ritek for this batch...
imgburn log
; //****************************************\\
; ImgBurn Version 2.5.1.0 - Log
; Thursday, 02 September 2010, 22:05:25
; \\****************************************//
;
;
I 22:03:51 ImgBurn Version 2.5.1.0 started!
I 22:03:51 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 22:03:51 Total Physical Memory: 2,095,200 KB - Available: 1,569,248 KB
I 22:03:51 Initialising SPTI...
I 22:03:51 Searching for SCSI / ATAPI devices...
I 22:03:51 -> Drive 1 - Info: HL-DT-ST DVD-RAM GSA-H55N 1.05 (D:) (ATA)
I 22:03:51 Found 1 DVD-ROM and 1 DVD±RW/RAM!
I 22:04:22 Operation Started!
I 22:04:22 Source File: H:\test.dvd
I 22:04:22 Source File Sectors: 3,827,488 (MODE1/2048)
I 22:04:22 Source File Size: 7,838,695,424 bytes
I 22:04:22 Source File Volume Identifier: DVD_ROM
I 22:04:22 Source File Volume Set Identifier: ec67c000MS UDFBridge
I 22:04:22 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 22:04:22 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 22:04:22 Source File File System(s): ISO9660, UDF (1.50)
I 22:04:22 Destination Device: [0:0:0] HL-DT-ST DVD-RAM GSA-H55N 1.05 (D:) (ATA)
I 22:04:22 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x)
I 22:04:22 Destination Media Sectors: 4,173,824
I 22:04:22 Write Mode: DVD
I 22:04:22 Write Type: DAO
I 22:04:22 Write Speed: 4x
I 22:04:22 Link Size: Auto
I 22:04:22 Lock Volume: Yes
I 22:04:22 Test Mode: No
I 22:04:22 OPC: No
I 22:04:22 BURN-Proof: Enabled
I 22:04:22 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 22:04:22 Book Type Setting: DVD-ROM
I 22:04:22 Optimal L0 Data Zone Capacity: 1,913,760
I 22:04:22 Optimal L0 Data Zone Method: Copied From Original Disc
I 22:04:22 Set L0 Data Zone Capacity Succeeded!
I 22:04:22 Filling Buffer... (40 MB)
I 22:04:24 Writing LeadIn...
I 22:05:00 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 22:05:00 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 22:05:00 Writing Layer 0... (LBA: 0 - 1913759)
W 22:05:05 Failed to Write Sectors 10016 - 10047 - Reason: Spindle Servo Failure
W 22:05:05 Retrying (1 of 20)...
W 22:05:05 Retry Failed - Reason: No Seek Complete
W 22:05:05 Retrying (2 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (3 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (4 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (5 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (6 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (7 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (8 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (9 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (10 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (11 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (12 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (13 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (14 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (15 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (16 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (17 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (18 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (19 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (20 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
E 22:05:20 Failed to Write Sectors 10016 - 10047 - Reason: Spindle Servo Failure
E 22:05:20 Next Writable Address: 0
I 22:05:20 Synchronising Cache...
W 22:05:23 User opted to skip the 'Close Track/Session/Disc' functions.
E 22:05:23 Failed to Write Image!
I 22:05:23 Exporting Graph Data...
I 22:05:23 Graph Data File: C:\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GSA-H55N_1.05_THURSDAY-SEPTEMBER-02-2010_10-04_PM_RITEK-S04-66_4x.ibg
I 22:05:23 Export Successfully Completed!
E 22:05:23 Operation Failed! - Duration: 00:01:01
I 22:05:23 Average Write Rate: 1,001 KB/s (0.7x) - Maximum Write Rate: 1,001 KB/s (0.7x)
I 22:05:25 Close Request Acknowledged
I 22:05:25 Closing Down...
I 22:05:25 Shutting down SPTI...
I 22:05:25 ImgBurn closed!
;
I failed to backup fujitsu dvd+r dl's because of spindle servo failure.
just bought the 15 pack, 5 discs wasted just to backup the same game, still not a single success
are fujitsu dvd+r dl's really that bad or my burner is just that outdated?
# EDIT
so it appears fujitsu outsourced ritek for this batch...
imgburn log
; //****************************************\\
; ImgBurn Version 2.5.1.0 - Log
; Thursday, 02 September 2010, 22:05:25
; \\****************************************//
;
;
I 22:03:51 ImgBurn Version 2.5.1.0 started!
I 22:03:51 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 22:03:51 Total Physical Memory: 2,095,200 KB - Available: 1,569,248 KB
I 22:03:51 Initialising SPTI...
I 22:03:51 Searching for SCSI / ATAPI devices...
I 22:03:51 -> Drive 1 - Info: HL-DT-ST DVD-RAM GSA-H55N 1.05 (D:) (ATA)
I 22:03:51 Found 1 DVD-ROM and 1 DVD±RW/RAM!
I 22:04:22 Operation Started!
I 22:04:22 Source File: H:\test.dvd
I 22:04:22 Source File Sectors: 3,827,488 (MODE1/2048)
I 22:04:22 Source File Size: 7,838,695,424 bytes
I 22:04:22 Source File Volume Identifier: DVD_ROM
I 22:04:22 Source File Volume Set Identifier: ec67c000MS UDFBridge
I 22:04:22 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 22:04:22 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 22:04:22 Source File File System(s): ISO9660, UDF (1.50)
I 22:04:22 Destination Device: [0:0:0] HL-DT-ST DVD-RAM GSA-H55N 1.05 (D:) (ATA)
I 22:04:22 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x)
I 22:04:22 Destination Media Sectors: 4,173,824
I 22:04:22 Write Mode: DVD
I 22:04:22 Write Type: DAO
I 22:04:22 Write Speed: 4x
I 22:04:22 Link Size: Auto
I 22:04:22 Lock Volume: Yes
I 22:04:22 Test Mode: No
I 22:04:22 OPC: No
I 22:04:22 BURN-Proof: Enabled
I 22:04:22 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 22:04:22 Book Type Setting: DVD-ROM
I 22:04:22 Optimal L0 Data Zone Capacity: 1,913,760
I 22:04:22 Optimal L0 Data Zone Method: Copied From Original Disc
I 22:04:22 Set L0 Data Zone Capacity Succeeded!
I 22:04:22 Filling Buffer... (40 MB)
I 22:04:24 Writing LeadIn...
I 22:05:00 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 22:05:00 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 22:05:00 Writing Layer 0... (LBA: 0 - 1913759)
W 22:05:05 Failed to Write Sectors 10016 - 10047 - Reason: Spindle Servo Failure
W 22:05:05 Retrying (1 of 20)...
W 22:05:05 Retry Failed - Reason: No Seek Complete
W 22:05:05 Retrying (2 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (3 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (4 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (5 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (6 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (7 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (8 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (9 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (10 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (11 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (12 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (13 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (14 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (15 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (16 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (17 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (18 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (19 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
W 22:05:05 Retrying (20 of 20)...
W 22:05:05 Retry Failed - Reason: Invalid Address For Write
E 22:05:20 Failed to Write Sectors 10016 - 10047 - Reason: Spindle Servo Failure
E 22:05:20 Next Writable Address: 0
I 22:05:20 Synchronising Cache...
W 22:05:23 User opted to skip the 'Close Track/Session/Disc' functions.
E 22:05:23 Failed to Write Image!
I 22:05:23 Exporting Graph Data...
I 22:05:23 Graph Data File: C:\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GSA-H55N_1.05_THURSDAY-SEPTEMBER-02-2010_10-04_PM_RITEK-S04-66_4x.ibg
I 22:05:23 Export Successfully Completed!
E 22:05:23 Operation Failed! - Duration: 00:01:01
I 22:05:23 Average Write Rate: 1,001 KB/s (0.7x) - Maximum Write Rate: 1,001 KB/s (0.7x)
I 22:05:25 Close Request Acknowledged
I 22:05:25 Closing Down...
I 22:05:25 Shutting down SPTI...
I 22:05:25 ImgBurn closed!
;
This message has been edited since its posting. Latest edit was made on 03 Sep 2010 @ 2:38
AfterDawn
Advertisement
#2
03 Sep 2010 @ 2:44
Did you make the image yourself and/or run it through abgx? I had the invalid address once when I patched a game in abgx to splitvid that I dont think needed it...burned the original image and it went right through
How I fix RRoD 360s (video): http://forums.afterdawn.com/t.cfm/f-152...s_video-832706/
#3
03 Sep 2010 @ 3:55
it died on the 1st minute though, which is really weird, I mean if it didn't finish after like 80% of the burn, I understand, but it ws like I put the disc in, 20 seconds later, error.
#4
03 Sep 2010 @ 9:15
Modking30
AfterDawn Addict
probably your burner or a software interfering. Make sure your antivirus is disabled. You should be using verbatim's and nothing else. That can make the difference alone.
This message has been edited since its posting. Latest edit was made on 03 Sep 2010 @ 9:16
#5
03 Sep 2010 @ 11:00
Verbatims. stop using shitty media.
Mods are like games.....GO BIG OR GO HOME!!
#6
03 Sep 2010 @ 13:03
turtknuk
Junior Member
Originally posted by evil99019:
I failed to backup fujitsu dvd+r dl's because of spindle servo failure.
just bought the 15 pack, 5 discs wasted just to backup the same game, still not a single success
are fujitsu dvd+r dl's really that bad or my burner is just that outdated?
quote]
That's more than likely your problem.
Fear The Fist Of The Turtle!!!!!!
#7
03 Sep 2010 @ 13:06
Originally posted by turtknuk:epic fail
Originally posted by evil99019:
I failed to backup fujitsu dvd+r dl's because of spindle servo failure.
just bought the 15 pack, 5 discs wasted just to backup the same game, still not a single success
are fujitsu dvd+r dl's really that bad or my burner is just that outdated?
That's more than likely your problem.
This message has been edited since its posting. Latest edit was made on 03 Sep 2010 @ 14:03
Mods are like games.....GO BIG OR GO HOME!!
#8
03 Sep 2010 @ 13:07
Sorry for double post.....stupid dell internet
This message has been edited since its posting. Latest edit was made on 03 Sep 2010 @ 14:02
Mods are like games.....GO BIG OR GO HOME!!
#9
03 Sep 2010 @ 19:22
so basically just because it's not verbatim it will fail? what kind of reason is that? you are basically every one else's DL suck?
#10
03 Sep 2010 @ 19:30
Originally posted by evil99019:Personally, I've had verbs fail with the "Invalid Address For Write" error as above. Seems to me like something else is going on besides "bad" media
so basically just because it's not verbatim it will fail? what kind of reason is that? you are basically every one else's DL suck?
How I fix RRoD 360s (video): http://forums.afterdawn.com/t.cfm/f-152...s_video-832706/
#11
03 Sep 2010 @ 20:23
Originally posted by evil99019:Pretty much, yeah. There's been a lot of research that has gone into media testing. I posted a link here not too long ago that illustrated testing results from all the different manufacturers. Sometimes, it can be a reputable manufacturer that has recently switched to a different production plant with inferior manufacturing techniques that can be the source of the problem. Rarer, you get a bad batch from a reputable manufacturer...yes, even Verbatim. The only way to tell who made what is by the media ID on the disc when you run it through a burning software.
so basically just because it's not verbatim it will fail? what kind of reason is that? you are basically every one else's DL suck?
To be honest, I buy both Verbatim and Memorex. I have a Sony Optiarc burner that does a great job...very few coasters out of the 4-500 games I've backed up.
My Liteon, Benq, and Samsung drives do well with either company. My Hitachi doesn't approve of my memorex burns sometimes...but it loves the Verbatim discs.
"All drives should be updated to Lite Touch + (LT+) firmware if playing on XBOX live. Samsung drives and pre-78/79 Hitachi drives do not utilize AP 2.5. All other drives are considered to be detectable by Microsoft (YMMV). Make sure all rips are ABGX verified, contain SSv2, and patched AP2.5 (where needed). XGD3 must currently be burned on new drive with PC Burner Max firmware for 100% rip. All modded consoles can be potentially unsafe for use on XBOX live."
#12
03 Sep 2010 @ 22:10
I thought memorex was widely accepted as shitty media, at least their dvd single layers are several tiers lower, and yet people praise their dual layers?
#13
04 Sep 2010 @ 3:00
santi1031
Junior Member
im sorry new here but my question is i don't want to download the games i want to know how to make a copy of my original games and it seems like it imposable to do any help please
This discussion thread has been automatically closed, as it hasn't received any new posts during the last 180 days. This means that you can't post replies or new questions to this discussion thread.
If you have something to add to this topic, use this page to post your question or comments to a new discussion thread.
If you have something to add to this topic, use this page to post your question or comments to a new discussion thread.
AfterDawn
>
Forums
>
Xbox 360 - Modding & Hacking
>
LG burner and fujitsu dvd+R DL's failed 5 times straight
