4.1 and below Firmware Softmod Guide - All Systems Except For Korean (LINKED 4.2 GUIDE)!
No Specific Game Questions Allowed!!
Read the guide & thread completely 1st before asking a question as most likely the answer is already there.
#301
14 Oct 2009 @ 2:55
chemeit
Visit user's personal pageSend private message to this user
Newbie
got a verbatim sd card 2 gb its supposed to be one ov the best let u know wat happens peace out
p.s just confirming i hav firmware 3.4e LAH104 australian pal nintendo wii
p.s just confirming i hav firmware 3.4e LAH104 australian pal nintendo wii
Quote:
yet again the custom ios failed error ret 1035 any other suggestion im following the guide to the letter and still no results i even tried installing the ios via netwok installion still nothing should i try a earlier version of cios ill wait for you guys to see wat u think
Quote:
Sorry didnt get it where is the link to upload files
This message has been edited since its posting. Latest edit was made on 14 Oct 2009 @ 23:57
#302
14 Oct 2009 @ 9:22
Originally posted by chemeit:did you get my PM about the wad files?? try them instead of yours. if that doesn't work i don't know what else to suggest, all i can say is don't give up, i got there in the end, i was just as stumped as you was at one point, it can very easily be something so simple.
got a verbatim sd card 2 gb its supposed to be one ov the best let u know wat happens peace out
p.s just confirming i hav firmware 3.4e LAH104 australian pal nintendo wii
Quote:
yet again the custom ios failed error ret 1035 any other suggestion im following the guide to the letter and still no results i even tried installing the ios via netwok installion still nothing should i try a earlier version of cios ill wait for you guys to see wat u think
#303
14 Oct 2009 @ 18:30
chemeit - you're still back to back posting and to add insult to injury you're using lazy/annoying text speak. Let's see both bad habits cease..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
#304
14 Oct 2009 @ 23:48
Originally posted by creaky:
chemeit - you're still back to back posting and to add insult to injury you're using lazy/annoying text speak. Let's see both bad habits cease..
Quote:
Sorry Mr President wont Happen Again
#305
14 Oct 2009 @ 23:55
sorry
This message has been edited since its posting. Latest edit was made on 14 Oct 2009 @ 23:56
#307
16 Oct 2009 @ 8:07
brptdoc1
Junior Member
has anyone ever had the homebrew channel installed upside down. i just did my friends wii and the hombrew channel is totally upside down and backwards up is down and down is up, this is only true fo the homebrew channel. i have done like 6 wii's and never seen this before.
#308
16 Oct 2009 @ 11:16
larrylje
AfterDawn Addict
Originally posted by brptdoc1:Uninstall it and reinstall it. See if that fixes it.
has anyone ever had the homebrew channel installed upside down. i just did my friends wii and the hombrew channel is totally upside down and backwards up is down and down is up, this is only true fo the homebrew channel. i have done like 6 wii's and never seen this before.
#309
16 Oct 2009 @ 11:23
brptdoc1
Junior Member
thanks larry i just suffered threw it, realy dont use the homebrew channel other than to insall the wads. just wanted to see if anyone else ever seen this happen. great directions by the way keep it up. you have made it so much easier since i first modded my wii the old way with the zelda game like 1 year ago it took me several hours, now it takes me like 10 mins.
#310
16 Oct 2009 @ 18:32
getting "DVD read error 1101" with any backup game, followed this guide and everything went well untill i tried a game... system was recently bought, came with 4.0E and serial starts with LU1133 if that helps....i did use neogamma 7 and rev14, any help would be great
#311
16 Oct 2009 @ 20:39
Well, Larry, thanks for a very informative guide. i have a 3.4U system, and followed the guide to the letter, successfully installing the HBC. I have not yet tried to play a burned DVD though. However, the HBC turned upside down during part of the installation. Following suggestions in this thread, I removed it from the Wii Channels.
Now when I tried to reinstall it (using the directions in the guide - i.e., get to the SD card menu, and then insert the SD card, and load the boot files from it), i get the following error message:
HackMii installer v0.6
This installer can NOT continue!
There is no known vulnerable IOS installed on this Wii.
Please note that we will not use a fakesigned IOS due to security reasons.
Look for updated version at:
http://bootmii.org
If this is already the latest version...well,suck it.
What can i do to correct this?
thanks in advance -- Punda
Now when I tried to reinstall it (using the directions in the guide - i.e., get to the SD card menu, and then insert the SD card, and load the boot files from it), i get the following error message:
HackMii installer v0.6
This installer can NOT continue!
There is no known vulnerable IOS installed on this Wii.
Please note that we will not use a fakesigned IOS due to security reasons.
Look for updated version at:
http://bootmii.org
If this is already the latest version...well,suck it.
What can i do to correct this?
thanks in advance -- Punda
#312
16 Oct 2009 @ 22:03
larrylje
AfterDawn Addict
Originally posted by Punda:Run DOP-IOS and install IOS36 without any of the hacks. Then see if it will run. After you run it and install HBC run DOP-IOS and install IOS36 again but this time patch it.
Well, Larry, thanks for a very informative guide. i have a 3.4U system, and followed the guide to the letter, successfully installing the HBC. I have not yet tried to play a burned DVD though. However, the HBC turned upside down during part of the installation. Following suggestions in this thread, I removed it from the Wii Channels.
Now when I tried to reinstall it (using the directions in the guide - i.e., get to the SD card menu, and then insert the SD card, and load the boot files from it), i get the following error message:
HackMii installer v0.6
This installer can NOT continue!
There is no known vulnerable IOS installed on this Wii.
Please note that we will not use a fakesigned IOS due to security reasons.
Look for updated version at:
http://bootmii.org
If this is already the latest version...well,suck it.
What can i do to correct this?
thanks in advance -- Punda
#313
17 Oct 2009 @ 0:07
Why does the guide say we can't use micro SD card adapters? I'm about to upgrade to 4.1 and before in softmodding my wii I used an micro adapter and had no problems. What's the big deal?
#314
17 Oct 2009 @ 0:24
larrylje
AfterDawn Addict
Originally posted by eagle5769:Because most have issues using them.
Why does the guide say we can't use micro SD card adapters? I'm about to upgrade to 4.1 and before in softmodding my wii I used an micro adapter and had no problems. What's the big deal?
#316
17 Oct 2009 @ 0:50
larrylje
AfterDawn Addict
Please don't turn this in a I use Micro-SD card + Adapter also. We all know that some have used Micro-SD cards and some have had issues. If you use it then good. Allot of other members have had issues using them. So I recommend not using them.
So lets leave it at that and leave future post to more important questions/issues and answers.
So lets leave it at that and leave future post to more important questions/issues and answers.
This message has been edited since its posting. Latest edit was made on 17 Oct 2009 @ 0:54
#317
17 Oct 2009 @ 2:15
Originally posted by larrylje:
Originally posted by Punda:Run DOP-IOS and install IOS36 without any of the hacks. Then see if it will run. After you run it and install HBC run DOP-IOS and install IOS36 again but this time patch it.
Well, Larry, thanks for a very informative guide. i have a 3.4U system, and followed the guide to the letter, successfully installing the HBC. I have not yet tried to play a burned DVD though. However, the HBC turned upside down during part of the installation. Following suggestions in this thread, I removed it from the Wii Channels.
Now when I tried to reinstall it (using the directions in the guide - i.e., get to the SD card menu, and then insert the SD card, and load the boot files from it), i get the following error message:
HackMii installer v0.6
This installer can NOT continue!
There is no known vulnerable IOS installed on this Wii.
Please note that we will not use a fakesigned IOS due to security reasons.
Look for updated version at:
http://bootmii.org
If this is already the latest version...well,suck it.
What can i do to correct this?
thanks in advance -- Punda
Larry, please how can I run DOP-IOS without the HBC ..as it is, the HBC is not even showing -- it is no longer in my Wii Channels, and trying to install it again produces the error above. Is there an alternative way of running the IOS files? I will go back and read the guide again..just in case I missed it...
thanks - Punda
#318
17 Oct 2009 @ 5:49
Instead of deleting HBC from the Wii Channel, you should've just uninstalled it using Hackmii; then reinstall it again using the latter. Anyway, do you have WAD Manager installed as a channel on your System Menu?
#319
17 Oct 2009 @ 12:25
sudeki300
Junior Member
i already have a softmodded wii on 3.1e with homebrew channel installed and ciso rev13. can i just use the 4.1 updater to get to 4.1 system menu or do i need to go through all the steps in the tut or is that just to softmod a 4.1 wii.thanks.............sudeki300
#320
17 Oct 2009 @ 12:26
larrylje
AfterDawn Addict
Originally posted by Punda:Try doing the following.
Larry, please how can I run DOP-IOS without the HBC ..as it is, the HBC is not even showing -- it is no longer in my Wii Channels, and trying to install it again produces the error above. Is there an alternative way of running the IOS files? I will go back and read the guide again..just in case I missed it...
thanks - Punda
Drag the boot.elf that is at the root of the SD card to your PC (Make sure it was transfered to your PC) then delete it from the SD card.
Now on the SD card go to the apps>hbc_dopios_v8 folder and COPY the boot.elf from that directory to the root of the SD card (Make sure you copy it so it stays in the hbc_dopios_v8 folder as well).
Now follow the instructions as you would to boot the hackmii installer. This should boot DOP-IOS so you can install IOS36 without the sig/hash Identify patch.
After you install IOS36 without the patches then you can delete the boot.elf from the root of the SD Card and drag the boot.elf (hackmii installer that you draged to the PC) back to the root of the SD card.
Now run the hackmii installer again. After installing HBC run DOP-IOS again and patch IOS36 again like it previously was.
This message has been edited since its posting. Latest edit was made on 17 Oct 2009 @ 16:09
#321
17 Oct 2009 @ 15:24
Originally posted by sudeki300:Given that your system is already softmodded, update using Waninkoko's custom Firmware Updater
i already have a softmodded wii on 3.1e with homebrew channel installed and ciso rev13. can i just use the 4.1 updater to get to 4.1 system menu or do i need to go through all the steps in the tut or is that just to softmod a 4.1 wii.thanks.............sudeki300
4.0 first, then 4.1.These custom firmwares should update your system leaving all your cIOSs and homebrew apps intact.
#322
18 Oct 2009 @ 4:38
Hi guys,
I did the tutorial and after that i discovered that my wii 3.4E is half bricked.
I've downloaded the waninkoko's "Wii Config" to set up my wireless connection but it did not appear in the HBC. I did put both .dol and .elf files in Apps folder.
What can i do to fix it?
I did the tutorial and after that i discovered that my wii 3.4E is half bricked.
I've downloaded the waninkoko's "Wii Config" to set up my wireless connection but it did not appear in the HBC. I did put both .dol and .elf files in Apps folder.
What can i do to fix it?
#323
18 Oct 2009 @ 11:37
larrylje
AfterDawn Addict
Originally posted by drofat:Please ask this type of questions in another thread. More then likely you updated with an out of region update which has nothing to do with this guide. As for setting up the application for HBC to find it you need a folder inside the apps folder then the dol/elf file inside that (Example apps/application folder/boot.dol/boot.elf).
Hi guys,
I did the tutorial and after that i discovered that my wii 3.4E is half bricked.
I've downloaded the waninkoko's "Wii Config" to set up my wireless connection but it did not appear in the HBC. I did put both .dol and .elf files in Apps folder.
What can i do to fix it?
This message has been edited since its posting. Latest edit was made on 18 Oct 2009 @ 11:40
#324
18 Oct 2009 @ 11:57
Originally posted by larrylje:I did that. I created a "Wii Config" folder with the files inside but the HBC did not recognize. Another thing larrylje, when i try to run the WSR in Neogamma, it came back to wii menu after a black screen.
Originally posted by drofat:Please ask this type of questions in another thread. More then likely you updated with an out of region update which has nothing to do with this guide. As for setting up the application for HBC to find it you need a folder inside the apps folder then the dol/elf file inside that (Example apps/application folder/boot.dol/boot.elf).
Hi guys,
I did the tutorial and after that i discovered that my wii 3.4E is half bricked.
I've downloaded the waninkoko's "Wii Config" to set up my wireless connection but it did not appear in the HBC. I did put both .dol and .elf files in Apps folder.
What can i do to fix it?
#325
18 Oct 2009 @ 11:59
larrylje
AfterDawn Addict
Originally posted by drofat:As it states in the guide and at the top of the thread in a banner it says not to ask about specific game titles. Please start a new thread on these issues.
I did that. I created a "Wii Config" folder with the files inside but the HBC did not recognize. Another thing larrylje, when i try to run the WSR in Neogamma, it came back to wii menu after a black screen.
This discussion topic is closed. You can't post to this topic.
Share this
