Hailz i have a very bad issue with my dvd writer i dont know why but the dvd writer keeps giving crc errors now all of a sudden it showed that dma crc eror on dvd writer and it aborted the writing process if it will help at all i had a sony ide writer which eventually got old and crap i got a new samsung sata this one always showed crc error i used nero ultra 7.2.0.3 then from start smart burning i shifted to burning rom i had a problem once before also that the dvds took some 54 mins to burn some blessed soul gave me a dma reset and it solved my problem [it has been almost a month since] till now it worked flawlessly on the nero burning rom i have a windows xp p4 2.5 845 motherboard 1 gb ram 2x500gb hdd and if it would help this is my burning log where the crc was shown
1-Slow down write speed to 6x 2-Update the drives firmware, your update might be Win 2000/XP/Vista ST02. http://www.samsung.com/in/consumer/...DBH/index.idx?pagetype=prd_detail&tab=support NOTE: Samsung shows three firmware updates for your drive, to choose the correct one you have to know the drives buyer code... Here's a snapshot from Samsungs site. - Caution Global distributiion firmware is different by each model''s customer code. Therefore, it''s recommend to check Customer code before upgrading firmware. - Upgrade Buyer Code : BEWD, RSMD, BEBD, BSBD - How to check Buyer Code : When you upgrade your firmware, please check the ''Buyer'' on your label of drive. If you upgrade wrong firmware, you will have a problem in operating. ex) SH-S223F/**** (****=Buyer Code) 3-Try using different media.
thanks but i didnt get it there are only 3 firmware updates on the site sboo stoo st02 i have some diff code like sh-s223f/idbf so now wat do i do
dude none of the firmwares are compatible with my drive idbh is not mentioned in any of the three please help man wat to do
