Evening, I have a Asus M4A89TD PRO Motherboard and a Thermaltake Spedo Case. All connections are going fine, but coming up to a small issue. The thermaltake has a POWER LED cable that is like this (I am trying to display as best as I can) pin,pin but the Motherboard has that type of cable connection as pin space pin I, so it's lke the mother needs that cable to be wider than what the case brings, is there anything I can do to make sure the this works, it's a waste to have a good setup the LED lights don't work. Any adivse would be appreciated. Thank you,
Some boards have both a 1-blank-1 connector and a 1-1 connector for the power LED. Check your motherboard manual to see if you've got one. If no luck you will have to carefully split the power LED connector into two halves that you can plug either side of the gap (This is how they should arrive, it's very poor of Thermaltake to have used the wrong design)
