Subscribe to AfterDawn's weekly newsletter.
E71 error fix?
#1
02 Dec 2011 @ 11:08
zpaitsel
Send private message to this user
Member
I have been searching around and can't seem to find a suitable solution ... A friend of mine has a system I'm attempting to fix for him and I seem to be getting an error E 71 after a couple minutes after booting up to the dashboard.
any suggestions, ideas ?
any suggestions, ideas ?
Zachary Paitsel
AfterDawn
Advertisement
#2
02 Dec 2011 @ 13:09
Now I have the RROD on the box.. it wont' even boot up..
is there a tutorial anywhere I can get on the reballing process using the kit they sell on ebay with the blue block and gpu / cpu pattern's
is there a tutorial anywhere I can get on the reballing process using the kit they sell on ebay with the blue block and gpu / cpu pattern's
Zachary Paitsel
#3
02 Dec 2011 @ 19:28
Originally posted by zpaitsel:Post this thread at this forum: http://forums.afterdawn.com/forum_view.cfm/152
Now I have the RROD on the box.. it wont' even boot up..
is there a tutorial anywhere I can get on the reballing process using the kit they sell on ebay with the blue block and gpu / cpu pattern's
Moderators, please close this thread.
This message has been edited since its posting. Latest edit was made on 02 Dec 2011 @ 19:37
#4
03 Dec 2011 @ 5:02
Originally posted by GI2:This is not about modding or hacking, so stop being a smartass. Zachary, you need to do a reflow, but that won't last forever, only maybe 1 to 3 months. I'd say it's time for a new box. For reflowing check youtube, you need a heatgun too. I wouldn't attempt a reball, first you'd have to desolder the CPU, the GPU and the RAM chips and then resolder them correctly. If you are not extremely good at this it's no use.
Originally posted by zpaitsel:Post this thread at this forum: http://forums.afterdawn.com/forum_view.cfm/152
Now I have the RROD on the box.. it wont' even boot up..
is there a tutorial anywhere I can get on the reballing process using the kit they sell on ebay with the blue block and gpu / cpu pattern's
Moderators, please close this thread.
Xbox 360: Slim untouched with a faked 320 GB harddrive for XBL, phat with LT 3.0, played Halo early, so going on live would be an instand ban, also with a faked 320 GB harddrive
PS3: Recently updated to PS3 slim 160 GB (60 GB phat still working)
PSVita: hardly ever play it
GameCube: DOL-001 model put in a DOL-101 case. Otherwise unmodified. With gameboy player. Trying to get a Wavebird controller.
PS3: Recently updated to PS3 slim 160 GB (60 GB phat still working)
PSVita: hardly ever play it
GameCube: DOL-001 model put in a DOL-101 case. Otherwise unmodified. With gameboy player. Trying to get a Wavebird controller.
#6
05 Dec 2011 @ 9:00
Originally posted by Eisherz:Thanks for the info, much appreciated... I have the heat gun .. I was going to give the reball a shot.. I tried the re-flow.. def a no go..still red lights and I have done a few in the past with no problem.... i mean why not since it's going to be a door stop anyway.. what's the difference.. I have descent solder skills maybe there is a good youtube video or something'.. i'll see what i can find.. but thanks again... hey if all else fails... i guess it's worth doing something with .. it's an original sammy configuration.. ms 25 no ap25 ;)
Originally posted by GI2:This is not about modding or hacking, so stop being a smartass. Zachary, you need to do a reflow, but that won't last forever, only maybe 1 to 3 months. I'd say it's time for a new box. For reflowing check youtube, you need a heatgun too. I wouldn't attempt a reball, first you'd have to desolder the CPU, the GPU and the RAM chips and then resolder them correctly. If you are not extremely good at this it's no use.
Originally posted by zpaitsel:Post this thread at this forum: http://forums.afterdawn.com/forum_view.cfm/152
Now I have the RROD on the box.. it wont' even boot up..
is there a tutorial anywhere I can get on the reballing process using the kit they sell on ebay with the blue block and gpu / cpu pattern's
Moderators, please close this thread.
Zachary Paitsel
#7
14 Jan 2012 @ 12:59
heat gun fixes are more difficult to do good cause its hard to heat the chip in stages and can popcorn the chip. if you want to reball you need get a bga reflow station. the heat gun pushes to much air to fast and your solder balls wont stay in place durring the process. they sell cheap reflow stations on ebay just stay away from the T862 ir station its to small and you will only have problems. If you hear a snap noise during the reflow or reball its time to stop and buy a new chip cause it will be red ringed no mater what you do after.
This discussion thread has been automatically closed, as it hasn't received any new posts during the last 180 days. This means that you can't post replies or new questions to this discussion thread.
If you have something to add to this topic, use this page to post your question or comments to a new discussion thread.
If you have something to add to this topic, use this page to post your question or comments to a new discussion thread.
