Hi I'm not sure if this is the right forum but I will give it a try yesterday I copyed the dvd Avatar using DVDFAB 7.0.4.0 It Say's completed successfully but when I play the copied disc in my dvd play after 2 hours and 14 minutes the picture go's fuzzy for about 1 minute and then it go's back normal. The writing speed I used was 1.0 Can any body help.
Try: DVDFab 7.0.5.3 http://www.dvdfab.com/mlink/download.php?g=DVDFAB_BETA&vid=avangate&aid=675 Write a Half Speed that your DVD Blank Media toll you so. If your Media say 16x....write at 8x ! Give the command on DVD Shrink after you hit Backup! > Burn Settings > Down scroll on Burn Speed and choose the correct one > OK NOTE: If you are using RW's ...write at 4x. like the disc say. P.S. I Think you are using the same DVD+RW way to many times to write over and over again according to your post somewhere else on this Web-site...and your DVD+RW is already too Old. Give yourself a Favor: Try regular +R or -R they only cost 16 cents each ! Stop Multi posting the same threat......is against the rules on this web-site. Good luck
Yes I did it I download dvdfab 7.0.5.3 and I turn the writing speed up to 2.0x Also I think it was my disc I put in a different Sony RW+ disc and it did it fine. I thought the hole point of using RW disc is that you can use then again again and again and again? Anyway thank for your help
You Welcome. The main use of RW's is usually to Test Burners or when somebody transfer something from a diff Video source to a DVD, like VHS, etc. 'cos it require high precision for your First Master and also 'cos they burning at low speed "4x". (some times they use a -R or +R that write at 4x or 6x as max. speed...but they are hard to find). Hope this help.
Oh, BTW, why you don't use DVD Shrink to copy your disc?? this program always working with no problem (at least for me)
