|
|
|
Burn failures with 'reset occurred'...usually during 2nd layer processing stage.
|
|
|
Adub5513
Newbie
|
1. September 2009 @ 18:47 |
Link to this message
|
Hello.
New here, as well as to burning with DL's. I've been burning movies on SL discs for quite some time with a success rate of .99XXX% I've just purchased a 50pk spindle of Ativa DVD+R DL's and am on my 5th coaster, all of them failing with a burn/write error during the 2nd layer process.
First, I'd like to say that I'm not very computer savvy and this is my first time on a forum that's at all computer-related, so please bare with me if I seem a bit slow or lack the proper usage of terminologies...
Having said that, I did do a search and picked up on general fixes like setting booktype to DVD-ROM; trying to burn at lower speeds; etc. But with such a wide variety of setups, software, hardware, and media, it's hard for me to determine where the problem lies.
Below is the error log for my last attempt (it's mostly heiroglyphic to me!). Please help me determine, if you can, whether it's a software setting issue, burner, or just crap media.
FYI, I usually read original dvd files on internal drive; decode and back up with Shrink 3.2; burn with external Sony DRX-810UL (using Nero that was bundled with burner, I think). However, the log below reflects a slightly different process where I opened the Nero Express app and imported the files that's been backed up to hard drive from previous attempts. In case this matters...
=====================================================================
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 9:35:32 AM
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d
(Nero Express)
Recorder: <SONY DVD RW DRU-810A> Version: 2.0b - HA 2 TA 0 - 6.6.0.14
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PHILIPS CDRW/DVD CDD5263>Version: UD91 - HA 1 TA 0 - 6.6.0.14
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHU2100AT atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS CDRW/DVD CDD5263 atapi Port 1 ID 0 DMA: Off
=== CDRom-Device-Map ===
PHILIPS CDRW/DVD CDD5263 D: CDRom0
SONY DVD RW DRU-810A G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047784kB)
Free physical memory: 396MB (406500kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.9.2009
UDF/ISO compilation
12:05:34 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
12:05:34 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
12:05:34 PM #3 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
12:05:34 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
12:05:34 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
12:05:34 PM #6 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-810A running
12:05:34 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)
12:05:34 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)
12:05:35 PM #9 Text 0 File Burncd.cpp, Line 3230
Turn on Disc-At-Once, using DVD media
12:05:35 PM #10 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3876111 (861:21.36, 7570MB)
12:05:35 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
12:05:35 PM #12 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: SONY DVD RW DRU-810A, Media type: DVD+R9 Double Layer
12:05:35 PM #13 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:05:35 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3876112 (3876112) = #3876112/861:21.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3876112 blocks [SONY DVD RW DRU-810A]
--------------------------------------------------------------
12:05:35 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DRU-810A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7938277376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
3876112 | lead-out | 1 | 0x41 | 0x00
12:05:36 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:05:36 PM #17 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.
12:05:36 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:05:36 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
12:05:36 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:05:36 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03C46C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x21 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00
12:05:36 PM #22 Text 0 File DVDPlusDualLayer.cpp, Line 595
L0 Data Zone Capacity set to 2035840 (1F1080h, 3976MB) -> OK, confirmed setting
12:05:36 PM #23 CDR -1205 File DVDPlusDualLayer.cpp, Line 622
Burning Layer 1
12:05:36 PM #24 Text 0 File DVDPlusDualLayer.cpp, Line 632
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
12:05:36 PM #25 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03C46C00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00
12:05:36 PM #26 Text 0 File DVDR.cpp, Line 5762
Drive: SONY DVD RW DRU-810A
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
12:05:36 PM #27 CDR -1211 File DVDR.cpp, Line 4929
Book Type set to: DVD-ROM
12:05:36 PM #28 Text 0 File DVDPlusRW.cpp, Line 655
Start write address at LBA 0
DVD high compatibility mode: Yes
12:28:24 PM #29 CDR -1206 File DVDPlusDualLayer.cpp, Line 1845
Burning Layer 2
12:28:24 PM #30 Text 0 File DVDPlusDualLayer.cpp, Line 1856
Perform layer 1 to 2 jump before writing at address 2035840 (1F1080h)
12:42:54 PM #31 SCSI -1114 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0BF80000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x33 0x72 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x29 0x00
12:42:54 PM #32 CDR -1114 File Writer.cpp, Line 311
Reset occurred
12:42:54 PM #33 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:42:54 PM #34 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:42:55 PM #35 SCSI -1033 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x04 0x01
12:42:55 PM #36 SCSI -1033 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x04 0x01
12:42:55 PM #37 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
12:43:05 PM #38 SCSI -1033 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03C46800
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x04 0x01
12:43:05 PM #39 CDR -1114 File WriterStatus.cpp, Line 167
Reset occurred
SONY DVD RW DRU-810A\H2 T0
12:43:05 PM #40 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
12:43:06 PM #41 SCSI -1033 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0012AE58
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x04 0x01
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x01 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x
12:43:07 PM #42 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.70a, size=20176 bytes, created 3/3/2004 1:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.5512 (xpsp.080413-2108), size=96512 bytes, created 4/13/2008 11:40:30 AM (Adapter driver for src)
=====================================================================
TIA for your time,
Adrian
|
AfterDawn Addict
|
1. September 2009 @ 21:15 |
Link to this message
|
|
|
|
