mmds chours

Hi i took my mmds box ( official)to a house in kerry ireland it had an areal mmds one would not work ,was looking for a code and frequency to continue .I had eurovox tx there worked ok ,i had to get a different down converter for it to pick up signal different from cork,can any one help please.Thanks

 

it should work off either down convertyor if its an official box . it wont be anything to do with codes. if it goes into network configuration after 20/30 seconds then the box is not receiving a signal. make sure all your leads are connected properly and if there was 2 boxes in that house before you could have it on the wrong line off splitter thats not allowing the 21v to the down convertor as the splitter is only power pass on one side

 

Hi jken thanks for advice the eurovox tx will work fine less most of channels but when i change to official box no good there are no splitters direct line to areal

 

does not make sence cos the sub box def works off either the 222 or the 214 down convertor. when box is in stand by mode is the time on the display or is it like this --;-- . if the time is not on it that means its not getting signal

 

Just because a dodgy box will work in an area a subbed box might not for obvious reasons region freq can be different on their platform also a dvb-c box will not work on a dvb-t system so make sure its a terrestial box and not a cable box also be aware that if the mmds was on the NTL platform the chorus mmds platfore is totally different

 

no different region frequency for mmds that subbed box wont pick up.. obviously its a dvb-t area he is in or the eurovox tx would not work .. what area did you bring the subbed box from hicone ?

 

there is m8 belive me just remember they have changed over to N3 now and as such the regions have moved belive me.

Also if he is from a NTL mmds area that box will not work in a chorus MMDS area and the eurovox will pick it up as all you change on that is the symbol rate where as the subbed box is totally different in that respect

so what is your reply to that ??

 

jken i dont see anything wrong in this post. why cant you just give advice and stop having a go at others?

 

its no problem maybe they know something i dont but even the cable areas now since they went N3 have also changed regions

 

you cant change symbol rate on eurovox tx chorus mmds to work on ntl mmds as one is dvb-c and the other dvb-t. and fakerbake i was not saying wrong about E45s post like us all we are just trying to help

 

that is not what im saying they said that the eurovox tx was working at their house but when they brought there subbed box to another house it did not work.

That is why i said that the house they brought the box to could have been MMDS ntl and as such the subbed box would not work there as that box would be DVB-T and ntl used DVB-C

A lot of areas that where chorus MMDS are now MMDS ntl and use DVB-C

 

hi i believe the time is not on display but the old box works fine do i need a stronger signal for official box

 

i seen your other post the new boxes only work in the Uk and not in ireland at the present time