Subscribe to AfterDawn's weekly newsletter.
No sound on NTL PACE DI4001N box?
#1
27 May 2010 @ 19:55
Louism92
Send private message to this user
Newbie
First post guys and i dont have much knowledge on these things, i have the box stated in the subject name, i have all the channels but no sound, does anybody know how i can fix this?
Thanks guys.
Thanks guys.
AfterDawn
Advertisement
#2
28 May 2010 @ 5:12
did you check your scart lead
ALL INFO FOR EDUCATIONAL PURPOSE ONLY
HOOTER007
HOOTER007
#3
28 May 2010 @ 6:10
yes checked the scart lean, plugged it in both slots on the box but no luck, any other ideas?
#4
28 May 2010 @ 6:27
is it a genuine box from your supplier / Provider?
Did you try a different scart?
Have you tried using audio leads? (red, white etc)
Did you try a different scart?
Have you tried using audio leads? (red, white etc)
This message has been edited since its posting. Latest edit was made on 28 May 2010 @ 6:28
#5
28 May 2010 @ 7:03
How would i go about it using the audio cables? red/white to red/white or red/white to audio jack? where do i plug them into?
#6
28 May 2010 @ 8:37
did you replace the scart and is this a box from your provider?
Some boxs have the audio cables, just seeing if yours did
Some boxs have the audio cables, just seeing if yours did
#7
28 May 2010 @ 10:04
I had this box from the provider a long time ago, had the card flashed, but now i have no sound
This message has been edited since its posting. Latest edit was made on 28 May 2010 @ 10:08
#8
28 May 2010 @ 10:15
aah! it could be due to the changeover to nag.3 so
which means no more free tv on that box if that is the case
"have you got a new card through your door for your sub box"
here is the latest list of areas that have changed over or to be changed over
link
also did you change the scart lead
and did you try and rescan the channels again
which means no more free tv on that box if that is the case
"have you got a new card through your door for your sub box"
here is the latest list of areas that have changed over or to be changed over
link
also did you change the scart lead
and did you try and rescan the channels again
This message has been edited since its posting. Latest edit was made on 28 May 2010 @ 10:17
ALL INFO FOR EDUCATIONAL PURPOSE ONLY
HOOTER007
HOOTER007
#10
28 May 2010 @ 10:44
Originally posted by Louism92:
what can i do then? i barly understood any of that too :P
the link i gave you if you live in any of those areas what it means basicaly is no more free tv on that box
but try this first
if you have a dvd player take the scart lead of that, and replace it with the 1 going from the back of your box to the tv (make sure it is pushed in tight to back of box & tv
if you go into the menu settings on your box with the remote
it should have a factory reset and then you should be able to install your channels with network search,
but as i dont have a v*rgin box i dont know which way the menu works myself also because it is a chiped box i am not 100% sure if you do a factory reset that it wont totaly screw your box up
can some1 confirm on whether its ok to try a factory reset on this box
ALL INFO FOR EDUCATIONAL PURPOSE ONLY
HOOTER007
HOOTER007
#11
28 May 2010 @ 11:41
well the box wont even boot now, its stuck on AP:52, im gunna leave it on fora while to see what happens.
ive been in the engineers menu and fiddled about with the default frequency, it was 643mhz originaly, at the bottom of the screen it says "found DMA's" or something like tha with yes next to it. i knows when a frequency wont work because no pops up instead of yes, so i put the frequency back to 643mhz, turned it on, fine but still no sound. turned it off, went back into engineers menu and it said no instead of yes. i think the box is completly f**ked lol
ive been in the engineers menu and fiddled about with the default frequency, it was 643mhz originaly, at the bottom of the screen it says "found DMA's" or something like tha with yes next to it. i knows when a frequency wont work because no pops up instead of yes, so i put the frequency back to 643mhz, turned it on, fine but still no sound. turned it off, went back into engineers menu and it said no instead of yes. i think the box is completly f**ked lol
#12
28 May 2010 @ 12:13
it will be as said above, they are going off, which means that box is coming to an end
#13
28 May 2010 @ 14:34
ok thanks a lot guys ;) but just one thing, i have another box which is chipped and it works fine! do each box go off when it wants to?
#14
28 May 2010 @ 14:41
Originally posted by Louism92:no both boxes should have gone of together unless that other box is basically broken
ok thanks a lot guys ;) but just one thing, i have another box which is chipped and it works fine! do each box go off when it wants to?
ALL INFO FOR EDUCATIONAL PURPOSE ONLY
HOOTER007
HOOTER007
#15
29 May 2010 @ 5:26
and we are not allowed to discuss modified provider boxs
#16
29 May 2010 @ 8:18
my fault :(
ALL INFO FOR EDUCATIONAL PURPOSE ONLY
HOOTER007
HOOTER007
This discussion thread has been automatically closed, as it hasn't received any new posts during the last 180 days. This means that you can't post replies or new questions to this discussion thread.
If you have something to add to this topic, use this page to post your question or comments to a new discussion thread.
If you have something to add to this topic, use this page to post your question or comments to a new discussion thread.
