DVD Rebuilder Official release thread (post updates here) - Professional version now at 1.28.2 (Jul 12 2008)

CHANGES MADE TO PRO VERSION
- Corrected an error introduced in version 1.27 that would
cause serious audio muxing problems.
- Fixed a source of a possible "Runtime Error 6"

Professional Edition Version 1.27.0

- Fixed an error in which the path for NicMp4Box.exe was not
being automatically detected.

- Updated routines so that when DVD-RB is running multiple
instances of HC Encoder the "*NOSMP" setting is used. This
has been tested to show faster processing on DVD-RB -- as
it already takes advantage of multiple processors.

- Update the HC interface so it specifically indicates whether
a file should be encoded as "*PROGRESSIVE or "*INTERLACED".

- Modified the REDISTRIBUTION and OPV prediction code for HC
Encoder. It should now take fewer passes for prediction in
most cases.

- Added a check for illegal characters in VOLUME_ID. This
condition could cause a failure to create an ISO image.

- Updated the "Close DVD-RB at batch completion" function so
it "sticks" between runs. Now the setting remains in
effect until reset.

- Wrote code to circumvent a source of "Runtime Error 52"
errors during the file copy section or "Buffer Overflow 0003"
in the REBUILD phase on certain types of corrupt sources.

- Made handling of certain sources that fall outside standards
more robust.
- Updated D2V creation routines to assume BT.601 colorimetry
where no SEQUENCE_DISPLAY_EXTENSION is present. Added a
"hidden" option called "BT601_DEFAULT=0" to the "[Options]"
area of REBUILDER.INI. This option can make DVD-RB assume
all unspecified streams to be BT.709 instead. This is
mainly for non-DVD sources. The default value is "1"
(BT.601 is the assumption).

- Added an additional filter prefix. When prefixed by "b:" a
filter is added only when the source colorimetry is BT.709
(including SMPTE 240M). This enables cases where you wish
the output to be converted, for example to BT.601. This
option is similar to "c:" but has an opposite effect.

- Corrected an error in which One Pass Encoding could, under
certain rare circumstances, select an incorrect Q/CQ value
and as a result over or undersize.

- Corrected an issue that could slow processing considerably
when a combination of encoding and extracting is occurring.

- Cleaned up a cosmetic glitch in which sometimes the "Overall
Progress" bar didn't correctly show status during ENCODE.

- Fixed an error in which Final_Q could not be calculated with
QuEnc or a command line encoder (that supports CQ).
- Improved the interface for CMDLINE encoding -- now the CQ is
passed as a floating point variable for more accurate sizing
during one-pass and REDISTRIBUTION.

- Modified the default values for PFactor and BFactor when
running HC Encoder in One Pass CQ mode.

- Improved the CMDLINE encoder interface so that it now also
passes "Closed GOP" (for ILVU) and "Bottom Field First"
(for interlaced encoding) information to the encoder.

- Made some small changes to the QuEnc interface to restore
FreeEnc compatibility.

- Added multiple threading capability to the MOBILE encoding
command line. This will speed up processing substantially
for those with multiple processors (e.g. dual/quad cores).

- Added additional checks to for encoders. Prevents encoders
from being enabled when they don't really exist.

- Other minor and cosmetic changes.

 

I received the email, but still thought it strange that it's been a while since the last update then the very next day theres this "fix" for it.
Thanks for making people aware.

 

Open Rebuilder. Click on Help and go down to Check Latest Version. This will take you to the download page.

 

A minor note:

If you should discover a bug when backing up a DVD then let jdobbs know so that he can replicate it and produce a fix. He is very open to feedback and is quick to fix an issue once it has been reported and proven to exist.

 

That's great!

 

wheres the free version link

ok i found it

 

Professional Edition Version 1.27.3

CHANGES MADE TO PRO VERSION
- Added a "Use *LOSSLESS Parameter" option to the
"HC OPTIONS" menu which will add that value (useful for
speeding up certain scripts) to the INI files passed to
HC encoder. Note: Only works with HC v0.22.1 or greater.

- Updated the ISO creation module so that now the ISO will
be created by ImgBurn rather than MKISOFS if ImgBurn is
installed and is of a high enough version to support it.

- Modified the HC calling module so that encoder priority
is set explicitly (based upon the option) in the HC.INI
file (HC v0.22 and higher).

- Corrected so that REDISTRIBUTION doesn't take effect
when "MOBILE Only" encoding is selected (it is not used
in that situation).

- Changed the "CORRUPT SOURCE" error message to a warning
and removed the annoying popup message. Some rippers
remove CELLs as needed from the VOB (usually junk cells
related to protection) without removing the reference to
the CELLS in the IFO(s).

- Built a workaround for movie-only PGC selection in discs
that have incorrect information in PGC tables.

- Corrected an error in which the batch shutdown had stopped
working since v1.27.0. Note also, that the setting for batch
shutdown is also now saved in the INI and will "stick"
between runs. Older version required setting it before all
batch runs.

- Corrected an issue related to Vista in which running in
"Multiple Encoder Processes" mode could cause HC and other
encoders to fail with "Failed to find and run encoder..."
This was caused by Vista's "improved" security.

- Modified loop checks during ILVU extraction in MOBILE
encoding so the extraction stops more quickly if "Abort"
is selected.

- Changed the actions for unload queries to make DVD-RB a bit
more robust in the event of problems.

- Added additional checks to ensure CCE paths are correctly
configured.

- Updated the codes so that NICAUDIO.DLL doesn't have to be
explicitly called out in the REBUILDER.INI file for use in
MOBILE encoding.

- Other minor and cosmetic changes.

 

haven't used the pay version yet guess i should buy it

 

Hey
Welcome in this forum. Hope you will enjoy discussion and you will give good suggestions to other people also.

p.s. i'm a (very stupid) spammer, does it show ?

 

Professional Edition Version 1.28.2

CHANGES MADE TO PRO VERSION
- Made numerous changes to make DVD-RB more sensitive to
the security environment of Vista.

- Made changes to make DVD-RB more compatible with some
windows emulators.

- Added support for the HC adaptive quantization (*AQ)
function. This setting can improve picture in flat
parts. A default value of "2" is used, but can be
changed by setting "HC_AQ=n" in the "[Options]" area
of REBUILDER.INI. "n" can be any integer value between
0 and 4. "0" disables AQ and "4" results in lower
quants. Note: Keep in mind that due to virtualization
associated with VISTA, your most current INI may be
located in the VISTA VirtualStore. One easy way to
get to it (if you are using VISTA), is to create a
shortcut on your desktop that points to it.

- Added a parameter to the HC SETTINGS menu that enables
and disables LOGGING when encoding with HC encoder. The
log will be written to a file named "HCLOG.TXT" in the
working directory.

- Included HC Encoder v0.23 in the installation packages.
This version includes extended features and bug fixes.

- Added ability to have different 1st and 2nd passes when
using MOBILE encoding (see the MOBILE.INI template under
the AVCHD beta for an example.

- Added a "hidden" option called "ImgBurnDest" that, when
added to REBUILDER.INI will force the write to a specific
drive. This is expecially useful when working on a
computer that has more than one writable drive. As an
example, to force output to the "F:" drive you would add
"ImgBurnDest=F:" to REBUILDER.INI.

- Modified the TEMPLATE commands so they automatically
look in the VirtualStore for templates.

- Corrected "35601" error that could happen (very rarely)
on sources with no audio.

- Added a parameter to the REBUILDER.INI file so that an
alternate AVISYNTH resizing algorithm can be used for
certain functions (e.g. converting from 4:3 widescreen
to 16:9 anamorphic). The default is "LanczosResize".
Example usage: "RESIZE=Spline36Resize" Note: Adding
an incorrectly spelled resize parameter will cause your
encoding to fail.

- Other minor and cosmetic changes.If you are a registered user of DVD Rebuilder Pro you can always download the latest

 

The second link hasn't been working for some time now. I can no longer find the forum there.
I'm sure most registered users will get their email notification by the end of this weekend.

 

Send jdobbs an email and he will correct it. He needs an email address that won't filter or block it.

Answer quote:

You of course can add it with these simple instructions.

 

- Made changes to make DVD-RB more compatible with some
windows emulators.

Ver 1.28.2 is working with Wine 1.0 on Ubuntu 7.10