Beginners guide to flashing box super usb only &latest firmware

do not do this if your box is a clone (may block ur box)
picture of a clone by mickof: http://i425.photobucket.com/albums/pp336/cable-closet/STARVIEW USB CLONE/untitled-1.jpg
(if metal heatsink is black, box is genuine,)
ok you download the file on your computer and save to your desktop,
but before you put anything on your box do a factory reset

here is the latest file below'
http://www.4shared.com/file/124547617/ce9c40a7/TheboxSuperUSB_V112.html

in your computer copy or paste the file from your desktop to the 'usb stick' then put it in the back of the box, (while its turned of) now turn it on, press ok to english, in the menu go down to where it says usb press ok on the remote, then you should see the 'file' you put on the usb, click on it and it will ask you do you want to update/replace file or something like that, press ok you will see the data going on your box then it will flash of and back on (the box will),do another factory reset then go to instalitions do a automatic scan all chanells will come in when thats done exit out of menu
now press menu then 1570 another menu will come up it looks like below,

nagravision
set default key
key code off

put key code on
then press set default key
and exit
then enjoy ur new box
ps:when finished, before you take the usb stick from your box make sure the box is turned off

 

Nice one hooter007, only other thing is to make sure you turn the box off with switch at the back before you take the USB stick out as you could otherwise damage the box

 

The box has to be factory reset after each firmware upgrade and re-scanned also

 

if i buy a svb 4 will i have to down load the software or can i buy ond thats ready to go

 

They dont come ready to go against the law.

 

bumped for beginners

 

bumped up

 

hooters i get this far, and it goes to do a scan, you can see it scanning but number at the end of th ebar is 1/28 then it finishes and says no new channels found, and just jumps into the 'manual scan' screen. any advice?? im raging, i thought this would be easy to do :-(

 

sounds like you have no aerial cable going into the back of the box !!

 

got the super box how will i know if it is a clone and is it easy to down load please help

 

had the same problem scanning for channels. are you using a splitter if so take it out and put your cable feed straight in to the box. this should sort out your problem.

 

THE BOX WILL BE HERE TOMORO I HOPE BUT NOT SURE IF I WILL BE ABLE TO DOENLOAD THE SOFTWARE GOT IT IN A BUBBLE HOPE ITS LEJIT

 

the old caps button stuck

 

no the cap button not stuck ha ha

 

hi, just an update, i got it in the end, but i had to do the whole process a good few times, id say nearly ten time anyway, i was probably just unlucky :-(

 

the dream box is now been fixed if they get a fix for the starvuew box i will scream as i have just ordered the ubs

 

ok through the grill on top and you should see a chip if its black its ok, silver its a clone
where the scart leads go in, above that the second grill across, you will need a good light or torch to see in or it,
also there is a page which shows you 30 more differences.sory cant remember what thread.and yes its easy to d.load just take your time and you will make no mistakes.

 

make sure you have your cable going into the right port its the one furthest away from the scart leads,also no splitters
to be used

 

thanks the box will be here tomorro got it in the bubble so hope full it not a clone i will cchck it out thanks