Assume they are DM 500-T boxes in which case you could offer them on ebay as unwanted christmas presents. Nothing should be allowed to collect dust (put them up as collectors items). Who knows
my boss mate me do it lol she wanted movies i want sport and kids wanted kids stuff and im paying a lot lol
I had no prob with that mate. That post was just a general release of 'tension' lol ! There are so many post about things working, things not workin, this box, that box... I along with only a few lucky gits are still happy !, for now...
and does your test box go off after a year and you need a new one .???? if you don't know could you please ask the person your testing for as i take it they part off the starview team . would like this cleared up as soon as . people need to know one way are the other. thanks n3_w
i am amazed you can say it will work for a year or even beyond when it is still on test(hope you are correct)
STARVIEW 6 LAN BOX ONLY SORRY FOR THE CONFUSION GROOVERIDER 1.01 FOR FIXED FOR STABILITY. PLEASE FOLLOW THE INSTRUCTION CAREFULLY IF YOU DONT WANT DEAD BOXES WHEN LOADING THE FIRMWARE! Load grooverider file on to your usb memory stick,make sure power is off on machine and insert the memory stick into the front usb socket underneath the front flap. From the main menu go to Utility and then press the right arrow button and select usb from the right hand side, you will see the grooverider file press ok on it and make sure to select SW+ALL DATA UPDATE.. the machine will update and restart (don't pull your memory stick out until the machine has fully started up) you now need to scan your channels, NO SPLITTERS ON YOUR INCOMING CABLE WHEN DOING YOUR SCAN so go to installation press the right arrow button again and go down to AUTO CABLE SEARCH all you need to change here is the symbol rate. The symbol rate determines your area for example N*l is 6887, the other numbers are 6952 for Telepe** and EXc&w. When you have selected your area go to start scan. once the scan has finished go to menu then highlight accessory and on the remote press the numbers "8989" you will then see "K*yedit" appear on the right hand side, go to it and press ok and just check that auto update is on if its off just turn it on. Then go to to your channels by exiting the menu and pressing ok.. Select a non FTA channel and leave it until a picture appears PLEASE NOTE IT CAN TAKE UPTO 5 MINUTES TO UPDATE SO BE PATIENT Channel list.. all your channels are categorised by pressing ok on your remote brings up the channel list but it will be in simple layout, pressing the red button takes you to detail, now if your list don't appear to be categorised you will need to press the SAT button on the remote and you need to select cable at the bottom of the list this will then give you the categories, to change each section you simply use your left or right arrow buttons GrooveRider SV6 1.00 : Ethernet Enable sw(STARview6) in Ireland and also fine to works pat** sw in UK Follow as below procedure a)Option -> Network -> Net Application -> then select “Istream” sever ( Ireland sever ) b-1) OSD Setting Auto Search -> Short CH Name : off ( Ireland ) - on ( UK ) b-a) OSD Setting Option -> OSD Setup -> Region - > Select 1 in uk ) - select 2 in Ireland b-c) OSD Setting If they have 16:9 TV please follow up “ Option -> OSD Setup -> Screen Format GrooveRider File click here
That file will only work on the Starview 6 lan box only all other boxes are for the bin there will be no fixes for ANY of the other boxes