Experiencing Difficulty Using DVD RB and CCE? If So, Then Ask Your Questions Here.

You can certainly rebuild again if you have the D2VAVS directory intact. But you will also need the original source directory. Audio and subpictures are pulled from the orignal during rebuild.

 

quick question:
If I use AnyDVD, would it be wise to use the actual disc as the source in Rebuilder without ripping it first?

 

No.

 

LOL People are saying I'm so verbose, I couldn't resist the temptation of that short answer. To explain why quickly. Time. Your DVD drive would be spending a lot more time running (many more hours on the laser and the associated wear). That's not including the additional time it will add to the backup process. Remember, you can do a rip with Decrypter in something like 15 min and run that from the hard drive. Just think how much faster the hard drive is compared to accessing the files on the disc from the DVD drive. If you have the time to spend, run the AnyDVD and run RB/CCE on the fly. If you're anything like most people, you'll probably cancel out before completion.

 

thanks brobear. I don't know why I didn't think of that. Usually I'm smarter than that, I don't know what happened. Oh well...

 

Just as a long as you're on topic and you include an index.

 

I forgot, Vurbal is here and he writes guides.

 

Hi all,

I'm using DVD-RB 0.85A with CCE Basic 2.69.

I've set "CCETargetSectors=2260000" setting as suggested on DVD-RB advanced guide. The process completes successfully with only some "missing frames" messages.
However, for some reason the output directory is only about 2GB in size while I'm expecting something above 4GB.
Could anyone shed some light on this?

Thanks

 

With that info it is a little hard to tell you what's wrong

Did you used the installer to install Rebuilder?

 

rockas:
I installed version 0.84 and overwrote it with files from 0.85A zip. Here are some excerpts from the log file that rebuilder put in the working directory:


[20:54:44] One Click encoding activated...
-----------------
[20:54:44] Phase I, PREPARATION started.
- "Steal Space from Extras" mode is enabled.
- VTS_04: 3,209,771 sectors.
-- Scanning and writing .D2V file
-- Processed 250,857 frames.
-- Building .AVS and .ECL files
- VTS_06: 291,126 sectors.
-- Scanning and writing .D2V file
-- Processed 54,111 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 58.9%
- Overall Bitrate : 2,428Kbs
- Space for Video : 3,769,228KB
- Movie improvement from extra reduction = 2.1%
- HIGH/LOW/AVERAGE Cell Bitrates: 3,480/784/2,428 Kbs
[20:59:57] Phase I, PREPARATION completed in 5 minutes.
[20:59:57] Phase II ENCODING started
- Creating M2V for VTS_04 segment 0
- Creating M2V for VTS_04 segment 1
...
- Creating M2V for VTS_04 segment 23
- Creating M2V for VTS_04 segment 24
- Creating M2V for VTS_06 segment 0
[22:37:33] Phase II ENCODING completed in 98 minutes.
[22:37:34] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_04
- Rebuilding segment 0 VOBID: 1 CELLID: 1
- Possible dropped frame(s) noted in this segment, continuing...
- Rebuilding segment 1 VOBID: 1 CELLID: 2
- Possible dropped frame(s) noted in this segment, continuing...
...
- Rebuilding segment 23 VOBID: 1 CELLID: 24
- Possible dropped frame(s) noted in this segment, continuing...
- Rebuilding segment 24 VOBID: 1 CELLID: 25
- Possible dropped frame(s) noted in this segment, continuing...
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_04_0.IFO
- Processing VTS_06
- Rebuilding segment 0 VOBID: 1 CELLID: 1
- Possible dropped frame(s) noted in this segment, continuing...
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_06_0.IFO
Correcting VTS Sectors...
[22:50:19] Phase III, REBUILD completed in 13 minutes.

Done.
[22:50:19] PREPARE/ENCODE/REBUILD completed in 116 min.



and there were dropped frames in every segment.
The original is 6.77GB big. That's after I removed stuff with DVD Shrink. Log says there was 58.9% reduction and Space for Video is 3,769,228KB. But the output directory is only 2.17GB and the quality is far from good -- not even as good as a 700meg divx file.

 

i have the pro version , i think i remember reading some where v1.00 is when it will be out of beta . i'm not 100% sure though . i just updated to v089 today , its getting there .

 

It will be out of beta sometime in the next month. That's the reason you are seeing so many updates. I'm cleaning up the remaining errors before I lock it down. I also have a couple of enhancements to the Pro Version that I want to be in before I release v1.00. The VIPs will probably see a release candidate in the near future.

 

one click mode isnt working anymore with v089 . if i go back to v088 it works . anybody else having this problem with the pro version and cce basic ? it wants me to click on the encode button every few minutes .

 

I've never heard of anything like that before... Are you talking about the "Encode" button in DVD-RB?

 

i've got it working now , i deleted my configuration setting file and reset up rebuilder and it works as it should now .

 

dlc2000


I started and aborted an encode using 1 click mode, what was it not doing?