1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Nero Burning problem

Discussion in 'Nero discussion' started by Rylenol, Dec 23, 2005.

Thread Status:
Not open for further replies.
  1. Rylenol

    Rylenol Member

    Joined:
    Feb 1, 2005
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    16
    Well here is the log, when I try and burn the disc it almost immediatly gives me an error, I have burned succesfully before and i get this error spuradically, right now ive been getting it pretty consistently. If I uncheck "Finish Disk" it will actually burn until 100% and then at the end it will give me a "reset occured" error. Any help would be greatly appreciated.


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e

    Recorder: <MAD DOG MD-16XDVD9> Version: 2.FD - HA 2 TA 0 - 6.6.0.18
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <SAMSUNG CDRW/DVD SN-324B>Version: U102 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : FUJITSU MHV2040AH atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CDRW/DVD SN-324B atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    SAMSUNG CDRW/DVD SN-324B D: CDRom0
    MAD DOG MD-16XDVD9 E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1279MB (1309928kB)
    Free physical memory: 801MB (821104kB)
    Memory in use : 37 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    24.12.2005
    Burn DVD Image
    3:06:43 AM #1 Text 0 File Reader.cpp, Line 127
    Reader running

    3:06:43 AM #2 Text 0 File Writer.cpp, Line 122
    Writer MAD DOG MD-16XDVD9 running

    3:06:43 AM #3 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    3:06:43 AM #4 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286010 (508:00.10, 4464MB)

    3:06:43 AM #5 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    3:06:43 AM #6 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: MAD DOG MD-16XDVD9, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    3:06:43 AM #7 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    3:06:43 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286011 (2286011) = #2286011/508:0.11
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286011 blocks [MAD DOG MD-16XDVD9]
    --------------------------------------------------------------

    3:06:43 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [MAD DOG MD-16XDVD9] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681750528, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286011 | lead-out | 1 | 0x41 | 0x00

    3:06:43 AM #10 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    3:06:43 AM #11 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    3:06:43 AM #12 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    3:06:43 AM #13 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    3:06:43 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    3:06:43 AM #15 Text 0 File DVDR.cpp, Line 2571
    Recording mode: Sequential Recording Mode

    3:06:43 AM #16 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: Buffer underrun protection -> ON

    3:06:43 AM #17 Text 0 File DVDR.cpp, Line 2726
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    3:06:43 AM #18 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    3:06:44 AM #19 Text 0 File Cdrdrv.cpp, Line 1288
    03:06:44.384 - MAD DOG MD-16XDVD9\H2 T0 : Queue again later

    3:06:45 AM #20 SCSI -500 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04080000
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    3:06:45 AM #21 Text 0 File Cdrdrv.cpp, Line 1288
    03:06:45.596 - MAD DOG MD-16XDVD9\H2 T0 : Queue again later

    3:06:47 AM #22 SCSI -500 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04521400
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    3:06:47 AM #23 Text 0 File Mmc.cpp, Line 19440
    Writer-Buffer for MAD DOG MD-16XDVD9\H2 T0 reduced to 32768Bytes

    3:06:47 AM #24 SCSI -1114 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04521400
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x06 (KEY_UNIT_ATTENTION)
    Sense Code: 0x29
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x29 0x00

    3:06:47 AM #25 CDR -1114 File Writer.cpp, Line 311
    Reset occurred

    3:06:48 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    3:06:48 AM #27 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    3:06:48 AM #28 Text 0 File DVDR.cpp, Line 2969
    EndDAO: Last written address was -1

    3:06:48 AM #29 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 4:03:00 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    Rylenol, Dec 23, 2005
    #1
  2. Rylenol

    Rylenol Member

    Joined:
    Feb 1, 2005
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    16
    anybody please, i would greatly appreciate some assistance
     
    Rylenol, Dec 24, 2005
    #2
  3. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96


    - think that's the latest Mad Dog firmware for this drive

    - 4464MB is burning too close to outer edge of discs. If you use DVD Shrink, set target size to 4300MB in Shrink's preferences thus avoiding outer edge and not sacrificing much space

    - oh God, you're using some of the most awful, atrocious utter rubbish dvd media there is. get decent media, and glance at my signature for reasons not to use CMC media, also decent media recommendations are in my sig. be nice to your burner at Xmas and don't feed it landfill media :)

    - see previous comments
     
    creaky, Dec 24, 2005
    #3
  4. whompus

    whompus Active member

    Joined:
    Dec 2, 2002
    Messages:
    1,346
    Likes Received:
    0
    Trophy Points:
    66
    The only thing I see at glance is It dont like the media. Firmware update may take care of that. This is there web site with info on the firmware versions

    http://www.mdmm.com/support/drivers.asp

    Your firmware seems to be the newest they offer at the moment. You may need to get some better media until the release another update firmware then see if you can use up the rest of this media you may have.
     
    whompus, Dec 24, 2005
    #4
  5. Rylenol

    Rylenol Member

    Joined:
    Feb 1, 2005
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    16
    Hey, yea Im thinkin bout buyin new media, im usin memorex which i have heard suck. I am setting the target size to 4300 now, one thing though, i have been able to burn on these DVDs. I have backed up 5 DVDs since i bought this pack. I wish i knew what was wrong, hopefully its the media. On a different note, when the DVDs backed up i had unchecked "Finalize CD" for all of those. Again, it was a 50/50 chance for the burn process to complete.
     
    Rylenol, Dec 24, 2005
    #5
  6. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    that's the thing with inconsistent, crap media..
     
    creaky, Dec 24, 2005
    #6
  7. Rylenol

    Rylenol Member

    Joined:
    Feb 1, 2005
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    16
    so you are pretty sure its the media? it could cause a reset in the beginning as well?
     
    Rylenol, Dec 24, 2005
    #7
  8. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    yup..
     
    creaky, Dec 24, 2005
    #8
  9. Rylenol

    Rylenol Member

    Joined:
    Feb 1, 2005
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    16
    wow, so what could make the DVDs burn on the memorex DVDs a couple times and then give me these reset occcured errors?
     
    Rylenol, Dec 24, 2005
    #9
  10. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    creaky, Dec 24, 2005
    #10
  11. Rylenol

    Rylenol Member

    Joined:
    Feb 1, 2005
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    16
    Well, I bought new media, a fuji film disc, so here is the log from my other attempt using a different media.

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 12/24/2005 1:57:41 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e

    Recorder: <MAD DOG MD-16XDVD9> Version: 2.FD - HA 2 TA 0 - 6.6.0.18
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <SAMSUNG CDRW/DVD SN-324B>Version: U102 - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : FUJITSU MHV2040AH atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CDRW/DVD SN-324B atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    SAMSUNG CDRW/DVD SN-324B D: CDRom0
    MAD DOG MD-16XDVD9 E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1279MB (1309928kB)
    Free physical memory: 828MB (848488kB)
    Memory in use : 35 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    24.12.2005
    Burn DVD Image
    9:48:33 PM #1 Text 0 File Reader.cpp, Line 127
    Reader running

    9:48:33 PM #2 Text 0 File Writer.cpp, Line 122
    Writer MAD DOG MD-16XDVD9 running

    9:48:33 PM #3 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    9:48:33 PM #4 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2202275 (489:23.50, 4301MB)

    9:48:33 PM #5 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    9:48:33 PM #6 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: MAD DOG MD-16XDVD9, Media type: DVD-R
    Disc Manufacturer: TYG02 -
    Disc Application Code: 64, Disc Physical Code: 193

    9:48:33 PM #7 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:48:33 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2202276 (2202276) = #2202276/489:23.51
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202276 blocks [MAD DOG MD-16XDVD9]
    --------------------------------------------------------------

    9:48:33 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [MAD DOG MD-16XDVD9] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4510261248, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2202276 | lead-out | 1 | 0x41 | 0x00

    9:48:34 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    9:48:34 PM #11 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    9:48:34 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    9:48:34 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    9:48:34 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    9:48:34 PM #15 Text 0 File DVDR.cpp, Line 2571
    Recording mode: Sequential Recording Mode

    9:48:34 PM #16 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: Buffer underrun protection -> ON

    9:48:34 PM #17 Text 0 File DVDR.cpp, Line 2726
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:48:34 PM #18 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    9:48:37 PM #19 Text 0 File Cdrdrv.cpp, Line 1288
    21:48:37.580 - MAD DOG MD-16XDVD9\H2 T0 : Queue again later

    9:48:39 PM #20 SCSI -500 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04080000
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    9:48:39 PM #21 SCSI -500 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04521400
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    9:48:39 PM #22 Text 0 File Mmc.cpp, Line 19440
    Writer-Buffer for MAD DOG MD-16XDVD9\H2 T0 reduced to 32768Bytes

    9:48:40 PM #23 SCSI -1114 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04521400
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x06 (KEY_UNIT_ATTENTION)
    Sense Code: 0x29
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x29 0x00

    9:48:40 PM #24 CDR -1114 File Writer.cpp, Line 311
    Reset occurred

    9:48:40 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    9:48:40 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    9:48:40 PM #27 Text 0 File DVDR.cpp, Line 2969
    EndDAO: Last written address was -1

    9:48:40 PM #28 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 4:03:00 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
    Rylenol, Dec 24, 2005
    #11
  12. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    Merry Xmas!

    i don't know enough about Fuji discs, i thought the Taiyo Yuden Fuji discs were supposed to have a MID (media code) of 'YUDEN000T02', not the generic TYG02 code. hmmm, dunno what to say as i don't know enough about Fuji.

    edit- found it "Fujifilm DVD-R 8x (TYG02)", so it would appear they're genuine Fuji discs.

    another edit - some info on those discs you bought - http://forums.afterdawn.com/thread_view.cfm/272692

    not sure where to go next for you other than to point the finger at that burner.. at least you got some real nice discs now
     
    creaky, Dec 25, 2005
    #12
  13. Rylenol

    Rylenol Member

    Joined:
    Feb 1, 2005
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    16
    Well I got two backups to copy yesterday, the odd thing is that the only way the discs burn is if I have the "Finalize Disc" option unchecked, that just seems strange. Whenever I have "Finzlize Disc" checked it doesn't even start, it almost instantly says "Reset Occured" and then get this error
    9:48:34 PM #18 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    9:48:37 PM #19 Text 0 File Cdrdrv.cpp, Line 1288
    21:48:37.580 - MAD DOG MD-16XDVD9\H2 T0 : Queue again later

    9:48:39 PM #20 SCSI -500 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04080000
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    9:48:39 PM #21 SCSI -500 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04521400
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    9:48:39 PM #22 Text 0 File Mmc.cpp, Line 19440
    Writer-Buffer for MAD DOG MD-16XDVD9\H2 T0 reduced to 32768Bytes

    9:48:40 PM #23 SCSI -1114 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04521400
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x06 (KEY_UNIT_ATTENTION)
    Sense Code: 0x29
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x29 0x00

    9:48:40 PM #24 CDR -1114 File Writer.cpp, Line 311
    Reset occurred

    9:48:40 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    9:48:40 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    9:48:40 PM #27 Text 0 File DVDR.cpp, Line 2969
    EndDAO: Last written address was -1

    9:48:40 PM #28 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5,540 KB/s)
     
    Rylenol, Dec 25, 2005
    #13
  14. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    creaky, Dec 25, 2005
    #14
Thread Status:
Not open for further replies.

Share This Page