1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Another DVD Shrink Error

Discussion in 'Nero discussion' started by needs, Apr 4, 2006.

Thread Status:
Not open for further replies.
Page 1 of 2
  1. needs

    needs Guest

    Any help would be much appreciated.

    It stopped working recently, and one of the members here advised me to update my firmware, Nero and to turn on the DMA.

    I did all of that and it started working again, but I'm now getting more error messages.

    Here's the log:

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 5/26/2003 11:33:58 PM
    ahead WinASPI: File 'C:\Downloads\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 7:35:34 PM
    Nero API version: 6.6.0.18
    Using interface version: 6.3.1.4
    Installed in: C:\Downloads\Nero\
    Application: ahead\Nero - Burning Rom
    Internal Version: 6, 6, 0, 18e

    Recorder: <_NEC DVD+RW ND-1100A> Version: 10GE - HA 1 TA 1 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD800BB-75CAA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
    CdRomPeripheral : KU2412P HEL189T 2.0B vaxscsi Port 3 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8162B D: CDRom0
    _NEC DVD+RW ND-1100A E: CDRom1
    Generic DVD-ROM G: CDRom2
    KU2412P HEL189T F: CDRom3
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523264kB)
    Free physical memory: 112MB (114860kB)
    Memory in use : 78 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    2.2.2003
    NeroAPI
    2:15:50 AM #1 Phase 112 File APIProgress.cpp, Line 276
    DVD-Video files reallocation started

    2:15:50 AM #2 Phase 114 File APIProgress.cpp, Line 276
    DVD-Video files reallocation completed (no file modified)

    2:15:50 AM #3 Phase 111 File APIProgress.cpp, Line 276
    DVD-Video files sorted

    2:15:50 AM #4 SCSI -1065 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x00D55400
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x20
    Sense Qual: 0x00
    CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x20 0x00

    2:15:50 AM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    2:15:50 AM #6 Text 0 File Writer.cpp, Line 122
    Writer _NEC DVD+RW ND-1100A running

    2:15:50 AM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    2:15:50 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    2:15:51 AM #9 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    2:15:51 AM #10 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    2:15:51 AM #11 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2128607 (473:01.32, 4157MB)

    2:15:51 AM #12 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO

    2:15:51 AM #13 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: _NEC DVD+RW ND-1100A, Media type: DVD+R

    2:15:51 AM #14 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    2:15:51 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2128608 (2128608) = #2128608/473:1.33
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2128608 blocks [_NEC DVD+RW ND-1100A]
    --------------------------------------------------------------

    2:15:51 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [_NEC DVD+RW ND-1100A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4359389184, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2128608 | lead-out | 1 | 0x41 | 0x00

    2:15:51 AM #17 Phase 24 File APIProgress.cpp, Line 276
    Caching of files started

    2:15:51 AM #18 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    2:15:51 AM #19 Phase 25 File APIProgress.cpp, Line 276
    Caching of files completed

    2:15:51 AM #20 Phase 36 File APIProgress.cpp, Line 276
    Burn process started at 4x (5,540 KB/s)

    2:15:51 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    2:15:51 AM #22 SCSI -1066 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x07BD0600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    2:15:51 AM #23 SCSI -1065 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x00D55400
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x20
    Sense Qual: 0x00
    CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x20 0x00

    2:15:52 AM #24 Text 0 File DVDPlusRW.cpp, Line 659
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    2:16:21 AM #25 SCSI -1106 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x015D0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x03
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x73 0x03

    2:16:21 AM #26 CDR -1106 File Writer.cpp, Line 311
    Power calibration error

    2:16:21 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    2:16:21 AM #28 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    2:16:22 AM #29 Phase 127 File APIProgress.cpp, Line 276
    Generating DVD high compatibility borders

    2:16:22 AM #30 Phase 129 File APIProgress.cpp, Line 276
    Generating DVD borders completed successfully

    2:16:22 AM #31 SCSI -1065 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x00D55400
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x20
    Sense Qual: 0x00
    CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x20 0x00

    2:16:22 AM #32 Phase 38 File APIProgress.cpp, Line 276
    Burn process failed at 4x (5,540 KB/s)

    2:16:22 AM #33 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    2:16:22 AM #34 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 7/15/2005 1:00:00 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 10/27/2005 7:12:48 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    needs, Apr 4, 2006
    #1
  2. pntyliner

    pntyliner Regular member

    Joined:
    Mar 31, 2006
    Messages:
    121
    Likes Received:
    0
    Trophy Points:
    26
    Hi there @needs. Did you recently change the type of media you are using? Like lacquer finish or mirror? There are a few other posts throughout AD which describe the same thing. Some drives don't like mirror fronts and won't burn. Try a solid color front.
     
    pntyliner, Apr 4, 2006
    #2
  3. needs

    needs Guest

    Nah, same good quality Verbatim I've always used.
     
    needs, Apr 4, 2006
    #3
  4. pntyliner

    pntyliner Regular member

    Joined:
    Mar 31, 2006
    Messages:
    121
    Likes Received:
    0
    Trophy Points:
    26
    pntyliner, Apr 4, 2006
    #4
  5. Mr_Pink

    Mr_Pink Regular member

    Joined:
    Sep 28, 2004
    Messages:
    1,363
    Likes Received:
    0
    Trophy Points:
    46
    Just an FYI: The shiny top/"lacquer" finishes are top quality media too (Verbatim or TY, of course).
     
    Mr_Pink, Apr 4, 2006
    #5
  6. pntyliner

    pntyliner Regular member

    Joined:
    Mar 31, 2006
    Messages:
    121
    Likes Received:
    0
    Trophy Points:
    26
    Hi @Mr.Pink. I see many people seem to choose verbatims and the TY. What's the difference between media's? Besides of course book type? I've used any variety of on-the-cheap brands for about 4 years now and never had a problem with any of them. Are they made differently?
     
    pntyliner, Apr 4, 2006
    #6
  7. needs

    needs Guest

    Still no luck.....
     
    needs, Apr 4, 2006
    #7
  8. fasfrank

    fasfrank Active member

    Joined:
    Oct 15, 2003
    Messages:
    3,675
    Likes Received:
    0
    Trophy Points:
    66
    Seems to me your Nero may be damaged or corrupted. At any rate your SCSI error is this:
    INVALID COMMAND OPERATION CODE

    I figure that out from the bit of code in the error:

    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x20
    Sense Qual: 0x00

    Then I go to my chart which has all these listed.

    http://www.isobuster.com/isobuster/help/hs305.htm


    Nero sends out commands (requests) to your DVD drive and if what Nero sends does not make sense to your drive then your drive(The SCSI device) tells Nero (or anyone else thats listening) that the command is invalid.
    At this point Nero wants to know how much space is available in the drive's read buffer. That's what it's trying to ask. This error is simply your drive telling Nero "I can't understand you!

    All the other errors that follow are the result of a sort of cascading effect, the first error causes another error and so on. Like a big car wreck. I tend to ignore subsequent error messages until the first one is corrected.

    Nero gets screwed up on occasion, sometimes things get moved around or inadvertently deleted. The thing to do at this point is to remove and reinstall the program. But first you may want to try Nero's Registry Checker and Driver Cleaner tools.
    http://nero.com/nero6/enu/Clean_Tools.html
    Sometimes simply getting the registry settings back in order will solve this type of error.
    The driver cleaner will make a list of any conflicting drivers. If there are none you will not see anything happen when you click the tool's .exe to start it. Maybe just a quick flash.

    If these don't help then remove and reinstall Nero, using the General Clean Tool. You may want to install Nero in your Program Files Directory as well. That's the normal spot.

    It could also be a problem with your drive. You may want to test it with a different program, DVD Decrypter is good for that sort of thing.

    Let us know...
    Cheers,
    Frank
     
    Last edited: Apr 4, 2006
    fasfrank, Apr 4, 2006
    #8
  9. needs

    needs Guest

    I tried the registry cleaner and driver cleaner tools but no luck.

    I'll try reinstalling Nero using the general clean tool.

    Here's the latest log in case you need to see it:

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 5/26/2003 11:33:58 PM
    ahead WinASPI: File 'C:\Downloads\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 7:35:34 PM
    Nero API version: 6.6.0.18
    Using interface version: 6.3.1.4
    Installed in: C:\Downloads\Nero\
    Application: ahead\Nero - Burning Rom
    Internal Version: 6, 6, 0, 18e

    Recorder: <_NEC DVD+RW ND-1100A> Version: 10GE - HA 1 TA 1 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD800BB-75CAA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
    CdRomPeripheral : KU2412P HEL189T 2.0B vaxscsi Port 3 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8162B D: CDRom0
    _NEC DVD+RW ND-1100A E: CDRom1
    Generic DVD-ROM G: CDRom2
    KU2412P HEL189T F: CDRom3
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523264kB)
    Free physical memory: 110MB (113368kB)
    Memory in use : 78 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    2.2.2003
    NeroAPI
    9:54:50 PM #1 Phase 112 File APIProgress.cpp, Line 276
    DVD-Video files reallocation started

    9:54:50 PM #2 Phase 114 File APIProgress.cpp, Line 276
    DVD-Video files reallocation completed (no file modified)

    9:54:51 PM #3 Phase 111 File APIProgress.cpp, Line 276
    DVD-Video files sorted

    9:54:51 PM #4 SCSI -1065 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x06FA5400
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x20
    Sense Qual: 0x00
    CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x20 0x00

    9:54:51 PM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    9:54:51 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    9:54:51 PM #7 Text 0 File Writer.cpp, Line 122
    Writer _NEC DVD+RW ND-1100A running

    9:54:51 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    9:54:51 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    9:54:51 PM #10 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    9:54:51 PM #11 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2286047 (508:00.47, 4464MB)

    9:54:51 PM #12 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO

    9:54:51 PM #13 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: _NEC DVD+RW ND-1100A, Media type: DVD+R

    9:54:51 PM #14 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:54:51 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286048 (2286048) = #2286048/508:0.48
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286048 blocks [_NEC DVD+RW ND-1100A]
    --------------------------------------------------------------

    9:54:51 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [_NEC DVD+RW ND-1100A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681826304, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286048 | lead-out | 1 | 0x41 | 0x00

    9:54:51 PM #17 Phase 24 File APIProgress.cpp, Line 276
    Caching of files started

    9:54:52 PM #18 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    9:54:52 PM #19 Phase 25 File APIProgress.cpp, Line 276
    Caching of files completed

    9:54:52 PM #20 Phase 36 File APIProgress.cpp, Line 276
    Burn process started at 4x (5,540 KB/s)

    9:54:52 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    9:54:52 PM #22 SCSI -1066 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0CAA0600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    9:54:52 PM #23 SCSI -1065 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x06FA5400
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x20
    Sense Qual: 0x00
    CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x20 0x00

    9:54:52 PM #24 Text 0 File DVDPlusRW.cpp, Line 659
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:55:17 PM #25 SCSI -1106 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x00CA0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x73
    Sense Qual: 0x03
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x73 0x03

    9:55:17 PM #26 CDR -1106 File Writer.cpp, Line 311
    Power calibration error

    9:55:17 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    9:55:17 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    9:55:17 PM #29 Phase 127 File APIProgress.cpp, Line 276
    Generating DVD high compatibility borders

    9:55:17 PM #30 Phase 129 File APIProgress.cpp, Line 276
    Generating DVD borders completed successfully

    9:55:17 PM #31 SCSI -1065 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x06FA5400
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x20
    Sense Qual: 0x00
    CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x20 0x00

    9:55:17 PM #32 Phase 38 File APIProgress.cpp, Line 276
    Burn process failed at 4x (5,540 KB/s)

    9:55:17 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    9:55:17 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 7/15/2005 1:00:00 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 10/27/2005 7:12:48 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    Thanks for your help so far.

     
    needs, Apr 5, 2006
    #9
  10. pntyliner

    pntyliner Regular member

    Joined:
    Mar 31, 2006
    Messages:
    121
    Likes Received:
    0
    Trophy Points:
    26
    Hi @needs, I know you stated you use top quality discs, but even the best of manufacturers have shipped bad press's. Meaning, it's possible you may have received a bad batch of discs. Just out of curiosity have you tried picking up a single or maybe a five pack of another type of manufactured dvd-r. I had a similar problem. I tried another disc and everything worked fine. I did the same stuff you did. Cleaned the reg, updated the firm. re-installed nero, even went as far as going back to old 6.6. I tried everything and was sure it was the drive. Until somebody told me to just try another kind of disc. For sure that's what it wasy. Just a last ditch option. Hope everything works out for you.
     
    pntyliner, Apr 5, 2006
    #10
  11. Car.Mike

    Car.Mike Active member

    Joined:
    Jan 24, 2004
    Messages:
    3,713
    Likes Received:
    1
    Trophy Points:
    66
    needs
    Are you using Hacked firmware as Nec's site is showing firmware 1.A3 but you are using 10GE? Or is this burner an OEM?
    Recorder: <_NEC DVD+RW ND-1100A> Version: 10GE
     
    Car.Mike, Apr 5, 2006
    #11
  12. fasfrank

    fasfrank Active member

    Joined:
    Oct 15, 2003
    Messages:
    3,675
    Likes Received:
    0
    Trophy Points:
    66
    This log has a Power Calibration error. That points to a drive problem.

     
    Last edited: Apr 5, 2006
    fasfrank, Apr 5, 2006
    #12
  13. needs

    needs Guest

    This is where I got my firmware: http://tinyurl.com/kmk2k

    I reinstalled Nero (got version 7 premium). I used it to make a data CD and it worked fine.

    It's still not working with DVD Shrink (Nero) but I can use DVD Decryptor, I just select create ISO and burn with DVD Decryptor, works fine.
     
    needs, Apr 5, 2006
    #13
  14. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @needs -

    thread teleported to Nero forum :)

    - looks like you have a DELL OEM drive; just checked Dell's site, 10GE is dated 25/04/2003!!. As far as i'm aware, 10GE was the latest update for this burner...so it's way old now...

    - your blank discs aren't being recognised, due to the firmware being so old. this is similar to what you should see -
    - ie a 3line paragraph when the firmware's up to date.


    Have done some searching on my old posts regarding old NEC burners such as yours...

    (here's a link to one of them, at the very least it reminded me of a fun thread - http://forums.afterdawn.com/thread_view.cfm/3/197820)

    Anyway, the standard 1100A can manage the following = 4 DVD+R, 2.4 DVD+RW

    From looking here - http://herrie.org/upgrdr.html the 1100A can be morphed into a 1300A, (ie via firmware update you can wring a little more life out of this burner, but not a great deal as 4x discs are becoming more scarce now) but it's a 50% success rate for either (i interpret the success rate to mean 50% success rate of burning to media at the newer speeds of the 1300A firmware, not 50% chance of the firmware upgrade itself working).

    if you morph this old drive into a 1300A, you have access to the following new capabilities - 4.0x DVD-R & 2.0x DVD-RW


    Basically firmware is what 'teaches' a drive about makes of media, burn speeds, how to interpret media etc etc, and your drive is just not recognising that media as the firmware is (probably current) however very old and the discs you're trying to use are newer than the burner is equipped to recognise/use.

    Also,
    - the ATAPI drivers aren't loaded correctly as they're not listed in this section, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm
     
    Last edited: Apr 6, 2006
    creaky, Apr 6, 2006
    #14
  15. pntyliner

    pntyliner Regular member

    Joined:
    Mar 31, 2006
    Messages:
    121
    Likes Received:
    0
    Trophy Points:
    26
    Creaky is right @needs, as I had said, it's the media. I too was able to successfully burn cd's but not on that specific dvd media I was using.
     
    pntyliner, Apr 6, 2006
    #15
  16. needs

    needs Guest

    I just tried using Nero to make a data DVD, using a good quality Verbatim, and yup it wouldn't recognise it, yet it worked fine with some crappy old 'Laser' brand discs. I use the cheap Laser discs for data; movies and games won't work on them.

    It's weird how I can still use DVD Decryptor and Alcohol 120% to burn to the same Verbatim media though, and get perfect results.

    I'll try morphing the drive into a 1300A and install my ATAPI driver correctly.

    I appreciate all this guys, thanks heaps. I'll post the results when I get it done.

    Edit: OK, how do I go about changing the drive to a 1300A? That page only listed possibilities, didn't have any guides/firmware downloads.

    I also couldn't see on this page.......... http://home.comcast.net/~bbmayo/FAQ.htm.........how to reinstall the ATAPI driver.
     
    Last edited by a moderator: Apr 6, 2006
    needs, Apr 6, 2006
    #16
  17. Car.Mike

    Car.Mike Active member

    Joined:
    Jan 24, 2004
    Messages:
    3,713
    Likes Received:
    1
    Trophy Points:
    66
    needs,
    The reason you can not write to Verbatim is because the burner does not recog that media as ther is no MID code written for it. You can get a burner for $40.00-50.00 US. The burner should be a d/l (-) and (+) burner. That burner you have is really old and NEC figures it would die so why write the code
     
    Car.Mike, Apr 6, 2006
    #17
  18. needs

    needs Guest

    Why does it burn to the same Verbatims when I use DVD Decryptor or Alcohol 120% though?
     
    needs, Apr 7, 2006
    #18
  19. Car.Mike

    Car.Mike Active member

    Joined:
    Jan 24, 2004
    Messages:
    3,713
    Likes Received:
    1
    Trophy Points:
    66
    needs ,
    I take a guess at this since I am not the programmer at Nero. Evidentially Nero needs to code so the burner along w/ the program will operate properly. If It works w/ DVDDecrypter then use that to burn
     
    Last edited: Apr 7, 2006
    Car.Mike, Apr 7, 2006
    #19
  20. fasfrank

    fasfrank Active member

    Joined:
    Oct 15, 2003
    Messages:
    3,675
    Likes Received:
    0
    Trophy Points:
    66
    So a pack of 100 Verbatims cost about as much as a new burner.
    I mean, new burners are getting cheaper than the media we use. I spend more on media than I do anything else and yet I put in a new burner every three or four months. (Addicted to Pioneer burners)

    It's something to consider. It would probably make all your problems go away.

    Sale price Verbs, $35.99 @supermediastore:
    [​IMG]

    Sale price NEC ND-3550A, 34.95 Also at supermediastore
    [​IMG]
     
    fasfrank, Apr 7, 2006
    #20
Page 1 of 2
Thread Status:
Not open for further replies.

Share This Page