First off let me say if this has already been brought up i am sorry. Well i am new to backing up DVD movies and i use DVD Shrink 3.17 to backup my dvd then using an AUDIO_TS and VIDEO_TS folder i burn them with nero the problem is when i burn them with nero 6 it burns to 100% then it gives me a Burn Failed error and i dont know why im new to nero so i dont know what to do. Any help will be greatly appreciated
Have you tried letting Nero burn on auto. ie when using shrink select your burner as your target destination, and letting Nero automatically burn? Also I could never get Nero to burn right, so I used Nero Express to burn my video_ts files.
you mean let dvd shrink encode then automatically burn with nero? no i havent i was not sure how to do this till recently but i was afraid to cuz i already ruined 3 dvds heh
To burn automatically with Nero. Open shrink, click edit then preferences, under File I/O tab check the box to Enable burning with Nero. Then when you click "backup!", change the target destination to your burner, then click ok.
Also if you wanna try Nero Express this is how I do it 1) Open Nero Express and choose DVD-Video Files 2) Double click the video_ts folder, then on the right click add. 3) Now browse for the video_ts file you wanna burn. Add all of the files in that folder, then click finished. (I don't add any files from the audio_ts folder ... because there are none.) 4) Click next, Name your disc, and burn away.
Do you know any reason why Nero would say burn failed after 100%??? im afraid to try it again and risk more blank dvds
Could be a few things. ASPI update or just a setting in Nero, etc... Next error, could you post your error log? Also what are your pc specs?
I Let shrink dvd burn the dvd after encoding it and it gave me the same error as always burn failed at 4x(whatever kb that it). thats 4 dvds i haven ruined can anyone tell me whats up
Mrecio, you should get a DVD+/-RW, you won't feel so bad about things. No coasters that way. Experiment ad lib.
I am having troubles burning DVD movies with Nero6 and I would like to know why I am having this trouble.
Saphire, you are definitely going to have to be more specific about your problems if you expect a meaningful answer.
I too cannot burn DVD's with Nero 6 Express, version 6.1.3.17. I am using KHypermedia blanks DVD+R. Get's right to the point of burning, then after a while it says "Burn process failed at 4X" Could not perform start of Disc at once. DVDRW IDE 1008. Burn process failed. Emachines T1100, XP Home, SP1, 256 RAM, Microadvantage 8DVDRW drive.
If you are going to use RW, then you need to format them before burning with Nero. This is a MUST. I tried burning unformatted dvd+rw's and i got the illegal disc error. the best free format utility (in my opinion) is DVDINFOPRO. also, check to see you have the latest firmware on your drive. go to cdfreaks.com Hardware like hard disks, and sound cards and even video cards don't need many if any firmware updates, but DVD RW drives NEED THEM. Why? new media are added and etc... hope i helped.
Couple more notes about my bad DVD attempt! I was trying to write a small data file. For some reason the DVD tray opened a couple of times during this process even though I had a DVD in it. Even during the recording process!!! I am sending the log file. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 4:03:36 PM ahead WinASPI: File 'F:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero version: 6.3.1.17 (Nero Express) Recorder: <DVDRW IDE1008> Version: 0054 - HA 1 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <DVDRW IDE1008 >Version: 0054 - HA 1 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST320410A atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD800JB-00ETA0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : DVDRW IDE1008 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === DVDRW IDE1008 D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 254MB (260592kB) Free physical memory: 126MB (129724kB) Memory in use : 50 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.8.2004 ISO compilation 7:26:56 PM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 7:27:24 PM #2 Text 0 File Reader.cpp, Line 118 Reader running 7:27:24 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 7:27:25 PM #4 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 7:27:49 PM #5 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 66106 ( 14:41.31, 129MB) 7:27:49 PM #6 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 7:27:49 PM #7 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: DVDRW IDE1008, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: F01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 1 7:27:49 PM #8 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.) 7:27:49 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 66107 (66107) = #66107/14:41.32 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 66107 blocks [DVDRW IDE1008 ] -------------------------------------------------------------- 7:27:57 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [DVDRW IDE1008 ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 135387136, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 66107 | lead-out | 1 | 0x00 | 0x41 7:27:57 PM #11 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 7:28:03 PM #12 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 7:28:03 PM #13 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 7:28:03 PM #14 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 4x (5,540 KB/s) 7:28:03 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 7:28:03 PM #16 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: CMC.MAG. Media type ID: F01 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 01 43 4D 43 20 4D - 41 47 00 46 30 31 00 38 ...CMC.MAG.F01.8 23 54 37 10 02 48 71 02 - 8C 69 16 16 0B 0B 0A 0A #T7..Hq..i...... 01 1D 1E 0C 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................ 7:29:15 PM #17 SCSI -1196 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03207000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x3A Sense Qual: 0x02 CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x3A 0x02 7:29:15 PM #18 SCSI -1196 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03207000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x3A Sense Qual: 0x02 CDB Data: 0x52 0x01 0x00 0x00 0x00 0xFF 0x00 0x00 0x1C 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x3A 0x02 7:29:15 PM #19 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:56,221 (56221ms) -> OK 7:29:15 PM #20 Text 0 File DVDPlusRW.cpp, Line 613 Start write address at LBA 0 DVD high compatibility mode: No 7:29:15 PM #21 CDR -1196 File ThreadedTransferInterface.cpp, Line 1614 Disc not present - tray open 7:29:15 PM #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614 Could not perform start of Disc-at-once 7:29:15 PM #23 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 7:29:15 PM #24 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\CDR4_2K.SYS': Ver=2.5 (094), size=52464 bytes, created 7/6/2002 2:16:03 PM File 'Drivers\CDRALW2K.SYS': Ver=6.2.0.129 , size=24698 bytes, created 10/16/2003 8:15:18 PM File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 4:03:36 PM File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 4:27:50 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I have similar problems with nero. i use shrink to rip and resize. that works wonderfully. then if I let shrink burn it starts and gets anywhere from 12to50 percent done and just sits and sits and sits. it says it is still writing but it is not doing anything. I actually have to reboot to make the drive stop running (sony double layer burner). If i try to use nero to burn from nero itself, it works 9 times out of 10 if i let it burn at 2xs speed. If I try to burn at 4xs speed it locks up the same way. I am using memorex dvd-r 4x discs. While I have been succesful at this I feel like I am underutilizing my available speed. Any help would be greatly apprec. rox
Whitley, How about we check some things off? 1) Is your burners firmware up to date? 2) Is your ide settings set to DMA? 3) Did you install InCD4? 4) Have you installed an apsi layer? 5) Have you tried different media? 6) And, are you doing anything else on your pc while trying to burn?
yes yes I don't think so I don't think so no no Like I said it burns ok a two times almost every time, but has yet to complete in shrink or at four times. rox
