nero says my dma is off but when i checked they are all on. I went to device manager turned it on. But still nero says its off. What do i do to fix this? Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM Nero version: 6.6.0.0 Recorder: <NU DVDRW DDW-082> Version: B377 - HA 0 TA 1 - 6.6.0.0 Adapter driver: <nvatabus> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.6.0.0 Adapter driver: <d347prt> HA 2 === Scsi-Device-Map === CdRomPeripheral : ATAPI DVD-ROM 16XMax nvatabus Port 0 ID 0 DMA: Off CdRomPeripheral : NU DVDRW DDW-082 nvatabus Port 0 ID 1 DMA: Off DiskPeripheral : WDC WD1200JB-00GVA0 nvatabus Port 0 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off === CDRom-Device-Map === NU DVDRW DDW-082 E: CDRom1 Generic DVD-ROM F: CDRom2 ATAPI DVD-ROM 16XMax D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 688MB (704876kB) Memory in use : 32 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 19.10.2004 UDF/ISO compilation 3:48:08 PM #1 Phase 112 File dlgbrnst.cpp, Line 1861 DVD-Video files reallocation started 3:48:08 PM #2 Phase 114 File dlgbrnst.cpp, Line 1861 DVD-Video files reallocation completed (no file modified) 3:48:08 PM #3 Text 0 File Isodoc.cpp, Line 6170 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 3:48:08 PM #4 Phase 111 File dlgbrnst.cpp, Line 1861 DVD-Video files sorted 3:48:08 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 3:48:08 PM #6 Text 0 File Writer.cpp, Line 122 Writer NU DVDRW DDW-082 running 3:48:08 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 3:48:08 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 3:48:08 PM #9 Text 0 File Burncd.cpp, Line 3119 Turn on Disc-at-once, using DVD media 3:48:08 PM #10 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1113743 (247:29.68, 2175MB) 3:48:08 PM #11 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 3:48:08 PM #12 Text 0 File DlgWaitCD.cpp, Line 2310 Recorder: NU DVDRW DDW-082, Media type: DVD-RW Disc Manufacturer: RITEKW - 01 Disc Application Code: 64, Disc Physical Code: 214 3:48:08 PM #13 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:48:08 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1113744 (1113744) = #1113744/247:29.69 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1113744 blocks [NU DVDRW DDW-082] -------------------------------------------------------------- 3:48:08 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1045 Prepare recorder [NU DVDRW DDW-082] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2280947712, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1113744 | lead-out | 1 | 0x00 | 0x41 3:48:08 PM #16 Phase 24 File dlgbrnst.cpp, Line 1861 Caching of files started 3:48:08 PM #17 Text 0 File Burncd.cpp, Line 4135 Cache writing successful. 3:48:08 PM #18 Phase 25 File dlgbrnst.cpp, Line 1861 Caching of files completed 3:48:08 PM #19 Phase 36 File dlgbrnst.cpp, Line 1861 Burn process started at 2x (2,770 KB/s) 3:48:08 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2471 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:48:08 PM #21 Text 0 File dlgbrnst.cpp, Line 1719 Set remaining time: 14:09,072 (849072ms) -> OK 3:48:08 PM #22 Text 0 File DVDR.cpp, Line 1955 Recording mode: Sequential Recording Mode 3:48:08 PM #23 Text 0 File Mmc.cpp, Line 20542 Set BUFE: Seamless Link -> ON 3:48:08 PM #24 Text 0 File DVDR.cpp, Line 2096 Start write address at LBA 0 DVD high compatibility mode: Yes 3:48:08 PM #25 Text 0 File Cdrdrv.cpp, Line 8259 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-RW (3), Part Version: 2 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 3:48:32 PM #26 Text 0 File DVDR.cpp, Line 4778 Drive: NU DVDRW DDW-082 Book Type request: DVD-ROM, write to EEPROM Changing the book type was finished with error code: 0 4:02:26 PM #27 Text 0 File WriterStatus.cpp, Line 116 <NU DVDRW DDW-082 > start writing Lead-Out at LBA 1113744 (10FE90h), lenght 0 blocks 4:02:26 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 4:02:27 PM #29 Text 0 File DVDR.cpp, Line 2338 EndDAO: Last written address was 1113743 4:02:42 PM #30 SCSI -1135 File Cdrdrv.cpp, Line 1175 SCSI Exec, HA 0, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x0C 0x00 4:02:42 PM #31 Text 0 File DVDR.cpp, Line 4778 Drive: NU DVDRW DDW-082 Book Type request: DVD-RW, write to EEPROM Changing the book type was finished with error code: 0 4:02:42 PM #32 Text 0 File dlgbrnst.cpp, Line 1719 Set remaining time: 0:00,000 (0ms) -> OK 4:02:42 PM #33 CDR -1135 File ThreadedTransferInterface.cpp, Line 1774 Write error 4:02:42 PM #34 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1774 Could not perform end of Disc-at-once 4:02:42 PM #35 Text 0 File DVDR.cpp, Line 2338 EndDAO: Last written address was -1 4:02:42 PM #36 Text 0 File DVDR.cpp, Line 4778 Drive: NU DVDRW DDW-082 Book Type request: DVD-RW, write to EEPROM Changing the book type was finished with error code: 0 4:02:42 PM #37 Text 0 File dlgbrnst.cpp, Line 1719 Set remaining time: 0:00,000 (0ms) -> OK 4:02:42 PM #38 Text 0 File dlgbrnst.cpp, Line 1719 Set remaining time: 0:00,000 (0ms) -> OK 4:02:42 PM #39 Phase 38 File dlgbrnst.cpp, Line 1861 Burn process failed at 2x (2,770 KB/s) Existing drivers: File 'Drivers\nvatabus.sys': Ver=5.10.2600.0412 built by: WinDDK, size=63744 bytes, created 1/12/2004 11:36:00 PM (Adapter driver for rec) File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 4:31:48 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Not a very good attitude I see. First off ... have some patience, we are all here on our free time. Second ... try the search function, this has been discussed. Last, try to uninstall your ide channels, reboot and let your O/S re-install them. After reboot, double check to make sure dma is still enabled then check with Nero Info tool. _X_X_X_X_X_[small]Dell 8250, Pentium 4 3.06GHz HT, 1.5GB RDRAM, HD's (1x200, 2x250), XP Pro SP1 NEC 2510A, Sony DDU-1612, Plextor Premium, 128MB ATI All-In-Wonder 9800 Pro Forum rules!! http://forums.afterdawn.com/thread_view.cfm/2487[/small]
yes i did that already. It can burn cds i dont know why it cant burn dvds. I have a NU DDW 082 dvd burner. Also the blank media i am using is memorex dvd-rw 1x-2x
Did you check your BIOS settings ? is DMA activated there --- and is it set to UltraATA/100 or UltraATA/66 depending on your PC capacity ?
OK now it when i burn with nero i completes 100% but when i put the disc back in to see whats on there it says its empty. here is the log. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM Nero version: 6.6.0.0 Recorder: <NU DVDRW DDW-082> Version: B375 - HA 0 TA 1 - 6.6.0.0 Adapter driver: <nvatabus> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.6.0.0 Adapter driver: <d347prt> HA 2 === Scsi-Device-Map === CdRomPeripheral : ATAPI DVD-ROM 16XMax nvatabus Port 0 ID 0 DMA: Off CdRomPeripheral : NU DVDRW DDW-082 nvatabus Port 0 ID 1 DMA: Off DiskPeripheral : WDC WD1200JB-00GVA0 nvatabus Port 0 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off === CDRom-Device-Map === NU DVDRW DDW-082 E: CDRom1 Generic DVD-ROM F: CDRom2 ATAPI DVD-ROM 16XMax D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 697MB (714512kB) Memory in use : 31 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 20.10.2004 UDF/ISO compilation 8:58:29 PM #1 Phase 112 File dlgbrnst.cpp, Line 1861 DVD-Video files reallocation started 8:58:29 PM #2 Phase 114 File dlgbrnst.cpp, Line 1861 DVD-Video files reallocation completed (no file modified) 8:58:29 PM #3 Text 0 File Isodoc.cpp, Line 6170 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 8:58:29 PM #4 Phase 111 File dlgbrnst.cpp, Line 1861 DVD-Video files sorted 8:58:29 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 8:58:29 PM #6 Text 0 File Writer.cpp, Line 122 Writer NU DVDRW DDW-082 running 8:58:29 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 8:58:29 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 8:58:29 PM #9 Text 0 File Burncd.cpp, Line 3119 Turn on Disc-at-once, using DVD media 8:58:29 PM #10 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1113743 (247:29.68, 2175MB) 8:58:29 PM #11 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 8:58:29 PM #12 Text 0 File DlgWaitCD.cpp, Line 2310 Recorder: NU DVDRW DDW-082, Media type: DVD-RW Disc Manufacturer: RITEKW - 01 Disc Application Code: 64, Disc Physical Code: 214 8:58:29 PM #13 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:58:29 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1113744 (1113744) = #1113744/247:29.69 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1113744 blocks [NU DVDRW DDW-082] -------------------------------------------------------------- 8:58:29 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1045 Prepare recorder [NU DVDRW DDW-082] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2280947712, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1113744 | lead-out | 1 | 0x00 | 0x41 8:58:29 PM #16 Phase 24 File dlgbrnst.cpp, Line 1861 Caching of files started 8:58:29 PM #17 Text 0 File Burncd.cpp, Line 4135 Cache writing successful. 8:58:29 PM #18 Phase 25 File dlgbrnst.cpp, Line 1861 Caching of files completed 8:58:29 PM #19 Phase 36 File dlgbrnst.cpp, Line 1861 Burn process started at 2x (2,770 KB/s) 8:58:29 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2471 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:58:29 PM #21 Text 0 File dlgbrnst.cpp, Line 1719 Set remaining time: 14:09,072 (849072ms) -> OK 8:58:29 PM #22 Text 0 File DVDR.cpp, Line 1955 Recording mode: Sequential Recording Mode 8:58:29 PM #23 Text 0 File Mmc.cpp, Line 20542 Set BUFE: Seamless Link -> ON 8:58:29 PM #24 Text 0 File DVDR.cpp, Line 2096 Start write address at LBA 0 DVD high compatibility mode: Yes 8:58:29 PM #25 Text 0 File Cdrdrv.cpp, Line 8259 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-RW (3), Part Version: 2 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:58:52 PM #26 Text 0 File DVDR.cpp, Line 4778 Drive: NU DVDRW DDW-082 Book Type request: DVD-ROM, write to EEPROM Changing the book type was finished with error code: 0 9:12:40 PM #27 Text 0 File WriterStatus.cpp, Line 116 <NU DVDRW DDW-082 > start writing Lead-Out at LBA 1113744 (10FE90h), lenght 0 blocks 9:12:40 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 9:12:40 PM #29 Text 0 File DVDR.cpp, Line 2338 EndDAO: Last written address was 1113743 9:13:02 PM #30 Text 0 File DVDR.cpp, Line 4778 Drive: NU DVDRW DDW-082 Book Type request: DVD-RW, write to EEPROM Changing the book type was finished with error code: 0 9:13:02 PM #31 Text 0 File dlgbrnst.cpp, Line 1719 Set remaining time: 0:00,000 (0ms) -> OK 9:13:02 PM #32 Text 0 File dlgbrnst.cpp, Line 1719 Set remaining time: 0:00,000 (0ms) -> OK 9:13:02 PM #33 Phase 37 File dlgbrnst.cpp, Line 1861 Burn process completed successfully at 2x (2,770 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM File 'Drivers\nvatabus.sys': Ver=5.10.2600.0412 built by: WinDDK, size=63744 bytes, created 1/12/2004 11:36:00 PM (Adapter driver for rec) File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 4:31:48 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
ultra33 ??????????????? you sure it's not ultra133 ?? what kind of PC you have ? You didnt give any details -- !
Also when i burn svcd on cd-rw it works fine. Here is the log for that. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM Nero version: 6.6.0.0 Recorder: <NU DVDRW DDW-082> Version: B375 - HA 0 TA 1 - 6.6.0.0 Adapter driver: <nvatabus> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.6.0.0 Adapter driver: <d347prt> HA 2 === Scsi-Device-Map === CdRomPeripheral : ATAPI DVD-ROM 16XMax nvatabus Port 0 ID 0 DMA: Off CdRomPeripheral : NU DVDRW DDW-082 nvatabus Port 0 ID 1 DMA: Off DiskPeripheral : WDC WD1200JB-00GVA0 nvatabus Port 0 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off === CDRom-Device-Map === NU DVDRW DDW-082 E: CDRom1 Generic DVD-ROM F: CDRom2 ATAPI DVD-ROM 16XMax D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 701MB (717876kB) Memory in use : 31 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 22.10.2004 Super Video CD 7:18:53 PM #1 Text 0 File VCDDoc.cpp, Line 1350 VideoCD document burn settings ------------------------------------------ Compilation type : SVCD Menu : Disable Picture in separate folder : FALSE Use CD-I : TRUE CD-I configuration : CONTROLS=ALL CURCOL=YELLOW PSDCURCOL=RED PSDCURSHAPE=ARROW CENTRTRACK=2 AUTOPLAY=AUTO_ON DUALCHAN=DUAL_ON TIMECODE_X=64 TIMECODE_Y=100 LOTID_X=64 LOTID_Y=64 ALBUM=STANDARD Encoding bitrate mode : User defined (kb/s) 7:18:53 PM #2 Text 0 File VCDCompilationImpl.cpp, Line 635 Super Video CD compatibility options: Videos directory: MPEG2 ENTRIES.SVD File Identification: ENTRYVCD 7:18:53 PM #3 Text 0 File Isodoc.cpp, Line 6170 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 2 / XA ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 7:18:53 PM #4 Text 0 File VCDDoc.cpp, Line 2819 SVCD options: ----------------------------------------------------- Create standard compliant CD: YES Encoding resolution: NTSC Encoding bitrate mode: 0 Fit to size in min: 74 Video directory: MPEG2 ENTRIES.SVD file ID: ENTRYVCD ----------------------------------------------------- 7:18:53 PM #5 Text 0 File Burncd.cpp, Line 2834 NU DVDRW DDW-082 Seamless Link activated 7:18:53 PM #6 Text 0 File Reader.cpp, Line 127 Reader running 7:18:53 PM #7 Text 0 File Writer.cpp, Line 122 Writer NU DVDRW DDW-082 running 7:18:53 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 7:18:53 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 7:18:53 PM #10 Text 0 File Burncd.cpp, Line 3119 Turn on Disc-at-once, using CD-R/RW media 7:18:53 PM #11 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 359850 ( 80:00.00) Last address to be written: 344021 ( 76:28.71) 7:18:53 PM #12 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 7:18:53 PM #13 Text 0 File DlgWaitCD.cpp, Line 2310 Recorder: NU DVDRW DDW-082; CDRW code: 00 97 25 30; OSJ entry from: INFODISC Technology Co., Ltd. ATIP Data: Special Info [hex] 1: D1 00 C6, 2: 61 19 1E (LI 97:25.30), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 02 4C B0, 2: 5C D8 36, 3: 00 00 00 (invalid) 7:18:53 PM #14 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:18:53 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE2_2336 () 2 indices, index0 (150) not provided original disc pos #0 + 600 (600) = #600/0:8.0 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_ULTRARAW96_MODE2, 2448, config 4, wanted index0 0 blocks, length 600 blocks [NU DVDRW DDW-082] 1: TRM_DATA_MODE2_2336 (Napoleon Dynamite_00) 2 indices, index0 (150) not provided original disc pos #0 + 343272 (343272) = #343272/76:16.72 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_ULTRARAW96_MODE2, 2448, config 4, wanted index0 0 blocks, length 343272 blocks [NU DVDRW DDW-082] -------------------------------------------------------------- 7:18:53 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1045 Prepare recorder [NU DVDRW DDW-082] for write in raw writing DAO infos: ========== MCN: "" TOCType: 0x20; Session Closed, disc fixated Tracks 1 to 2: 1: TRM_ULTRARAW96_MODE2, 2448/0x04, FilePos 0 367200 1836000, ISRC "" 2: TRM_ULTRARAW96_MODE2, 2448/0x04, FilePos 1836000 2203200 842533056, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 600 | 2 | 0 | 0x00 | 0x41 750 | 2 | 1 | 0x00 | 0x41 344022 | lead-out | 1 | 0x00 | 0x41 7:18:53 PM #17 Phase 24 File dlgbrnst.cpp, Line 1861 Caching of files started 7:18:54 PM #18 Text 0 File Burncd.cpp, Line 4135 Cache writing successful. 7:18:54 PM #19 Phase 25 File dlgbrnst.cpp, Line 1861 Caching of files completed 7:18:54 PM #20 Phase 36 File dlgbrnst.cpp, Line 1861 Burn process started at 4x (600 KB/s) 7:18:54 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2471 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 7:18:54 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2471 Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #750 7:18:54 PM #23 Text 0 File Mmc.cpp, Line 15894 StartDAO : CD-Text - Off 7:18:54 PM #24 Text 0 File Mmc.cpp, Line 20542 Set BUFE: Seamless Link -> ON 7:38:56 PM #25 Text 0 File WriterStatus.cpp, Line 116 <NU DVDRW DDW-082 > start writing Lead-Out at LBA 344022 (53FD6h), lenght 6750 blocks 7:39:19 PM #26 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 7:39:24 PM #27 Text 0 File dlgbrnst.cpp, Line 1719 Set remaining time: 0:00,000 (0ms) -> OK 7:39:24 PM #28 Phase 37 File dlgbrnst.cpp, Line 1861 Burn process completed successfully at 4x (600 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM File 'Drivers\nvatabus.sys': Ver=5.10.2600.0412 built by: WinDDK, size=63744 bytes, created 1/12/2004 11:36:00 PM (Adapter driver for rec) File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 4:31:48 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)