|
Jetway DVB-T PCI
|
|
|
ljk
Newbie
|
29. October 2004 @ 10:40 |
Link to this message
|
|
Anyone know what TV and DVR software will work with this.
Great card, crap bundled software...
|
|
Advertisement
|
 |
|
|
|
1113562
Newbie
|
29. November 2004 @ 07:20 |
Link to this message
|
|
I have one of these cards as well and didn't think the S/W was much good either. I am not sure it exactly the same model as yours, it sounds the same.
I am having trouble recording TV and getting the sound to line up with the picture. Its quite good when live on the PC screen but you get a big delay on playback if you record to disk.
Also my IR remote controller that came with the card doesn't work with the little IR sensor on the end of a short cable, does yours? My one is completely dead.
Regards,
John
|
|
ljk
Newbie
|
29. November 2004 @ 10:19 |
Link to this message
|
|
Yes, mine all works fine, inc infra red remote, video glitches occasionally if the PC does something else, that's all.
The biggest problem is the really crap program guide and station listing. The stations are all totally out of order, so you have to remember about 40 channel numbers.
|
|
ZTT
Newbie
|
6. January 2005 @ 06:28 |
Link to this message
|
|
bump...
any better software on this product would be useful. The scheduler is a bit crap too!
This message has been edited since posting. Last time this message was edited on 6. January 2005 @ 06:29
|
|
pmiller05
Newbie
|
11. January 2005 @ 02:09 |
Link to this message
|
|
I too have one of these cards. I'm sure they are also
sold under the kworld and vstream brands. I'd also like
to see better software, in particular an easy way of
re-ordering channels. UK text and off-air epg would be
nice too. The card appears to be based on the Conexant
blackbird or stratford development kit, but there is
no useful informaiton available to the public :-( .
I can record from the card successfully, but I'm having
sound sync problems after I have edited the saved
video - anyone any suggestions?
Thanks
Peter
|
|
charmer
Newbie
|
16. February 2005 @ 12:47 |
Link to this message
|
|
The software with this card is awful! Like you say, the card is great, but the fact that you can't change the order of channels makes it a nightmare to use. A quote on the Jetway web site (www.jetway.com.tw) made me laugh - "you can access channels directly by pressing the configurable channel number". Configurable?!?!
I tried using ShowShifter (www.showshifter.com) to see if that would make things any easier, but it seems the card isn't compatible. I've also experimented with other ShowShifter-type PVR software, but none of it seems to want to play ball.
If anyone finds some useful software, an updated driver or works out how to re-order channels, I'd love to hear from them
charmer
|
|
ljk
Newbie
|
17. February 2005 @ 01:13 |
Link to this message
|
|
Since this is such a cheap card and readily available, I am surprised that no enterprising individual hasn't started work on either fixing this or making some better software.
|
|
ZTT
Newbie
|
18. February 2005 @ 05:36 |
Link to this message
|
|
Hmm... I have one of these cards as well as a Hauppauge Dec2000-T. I am currently writing a scheduler application for the Dec and it might not be too difficult to add in support for the Jetway card also... I just need to know how to initiate the jetway card with the right params to kick it off recording. Any help here would be much appreciated!
Oh, and the PVR scheduler I am writing autoschedules the programme to record by working with the FreeGuide java application.
ZTT
|
|
pmiller05
Newbie
|
18. February 2005 @ 06:21 |
Link to this message
|
|
I think the Linux guys have managed to make this card work, so the information needed to program and use
this card is out there - I remember seeing some stuff
when I was trying to learn about the card.
I can't help with programming - My skills veer toward
the screwdriver and soldering iron (ie hardware) end
of things.
I've managed to fix the sound sync problems with
recorded and edited video with pvastrumento.
Peter
|
|
1113562
Newbie
|
19. February 2005 @ 10:45 |
Link to this message
|
|
Peter,
What the hell is pvastrumento when it's about? I would like to know how you line up sound with picture.
John
|
|
timcrump
Newbie
|
1. March 2005 @ 04:32 |
Link to this message
|
I too have had problems with sound sync.
Seems to be a wrong implimentation of MPEG-2 standards, Nero highlights an error when transcodeing to burn a DVD-video. But
Jetway have just released a new version (v2.13) of the software and initial results are good.
visit http://www.jetway.com.tw/evisn/index.html
|
|
charmer
Newbie
|
1. March 2005 @ 06:02 |
Link to this message
|
|
well at least there's that channel listing panel to the side now. Makes it much easier to skip to a specific channel without having to remember a channel number or using the Setup screen. Just need a slight update to allow custom channel ordering. Can't be that hard surely!
|
|
pmiller05
Newbie
|
1. March 2005 @ 07:14 |
Link to this message
|
|
pvastrumento tidies up and fixes as best it can damaged
mpeg files to try to make them DVD compliant. Files
recorded 'off air' are unlikely to be perfect all the
way through, particularly if more than a few minutes
long. DVB display software will likely hiccup or
pixellate over any errors but will carry on playing
a live or recorded from off-air file, which is the
intended behaviour.
On a long recording from 'off-air' DVD playing
software appears to gradually lose audio/video sync
because it doesn't know what to do with the
accumulated errors (unlike DVB playing software).
DVD authoring software can just give up as timcrump
above has found out because of the unexpected errors.
1113562 - if you start from the afterdawn home page
and rummage amongst the utilities or do a google
search you will find pvastrumento.
These Jetway cards appear to be re-badged versions
of a k-world card (look at the driver file
information if you are using windows) - the 2.13
revision has been available on the kworld ftp
site for a few weeks now....
Happy viewing
Peter
|
|
eustud
Newbie
|
19. March 2005 @ 04:58 |
Link to this message
|
|
how do you record using this card, because it keeps coming up 'Cannot get MPEG Muxer interface
'
|
|
ljk
Newbie
|
19. March 2005 @ 11:52 |
Link to this message
|
|
Sounds like you have a problem with your installation. Mine records fine.
I also have a Hauppauge DEC2000 running from the same TV aerial. I get no recording problems with that.
One thing I have found is that TV aerial boosters seem to work great with DVBT, unlike analogue which usually just gets noisier.
|
|
bonthron
Newbie
|
22. March 2005 @ 12:28 |
Link to this message
|
I installed the software on my old PC with USB1.0 and it was jumpy.
I have now installed it on my new WinXP PC and the picture is great.
The problem I now have is that it won't record!
I get the muxer error that eustud is getting.
I have tried uninstalling and reinstalling without success.
I tried to install the new software DVB-USB.zip (downloaded from http://www.jetway.com.tw/evisn/download/driver/vga/index.htm)
But I keep getting an error
--"We CAN'T find any DVB-T USB2 Devices on your system"
But is is installed and running and is USB2!
Can anyone give me some advice?
Thanks
|
|
timcrump
Newbie
|
23. March 2005 @ 04:39 |
Link to this message
|
|
I do not know if this will assist
Generally Software should be installed before the USB device is first connected. So make sure it is unplugged and then removed from the devices under My Computer. Reboot. Then reinstall the software. Reboot and when XP is running plug in the USB device.
|
|
eustud
Newbie
|
24. March 2005 @ 03:19 |
Link to this message
|
|
hi do u reckon that would work with the pci card too?
|
|
garth45
Suspended due to non-functional email address
|
28. March 2005 @ 09:01 |
Link to this message
|
|
hi i ahve a card as well, i have downloaded the new upgrade and found that the computer hangs up when loading, i did a registery clean,and the computer loaded as normal, but there was no remote control feature for the card, i reloaded the software and restarted my computer and the hang up was there again. otherwise i am quite happy with the card, think it might work better if they put numbers by the programmes available.
also have experienced some problems when recording tv over long periods of time, bit of picture breakup, just stopped recording and restarated.
|
|
eustud
Newbie
|
6. April 2005 @ 13:34 |
Link to this message
|
hi just woundering if any one could help; im still having recording problems with my card, but when i change the 'Capture formate (profile):' to 'MPEG2 TS' it does recorde but when i try to open the file it will not open.
iv tried:
Media Player
Nero Show Time
Quick Time
Real Player
Power DVD
also the 'Capture formate (profile):' to 'MPEG2 PS; which do i use and how do i get it to work?
|
|
blob33
Newbie
|
24. April 2005 @ 02:10 |
Link to this message
|
|
Hi i've been looking at this page for a while to hopfully see if anyone has found a fix for the "cannot find mpeg muxer interface"
Today i have managed to get my capture feature to work.
using mpeg-ps i then removed all video editing software off my system (Powerproducer 2 gold edition) (Unlead video studio6). during the uninstallation it asked if i wanted to remove several .dll files that might be used by other programs i clicked yes and hay presto i can now capture in mpeg-ps format. hope this helps at least one of u people. please reply if it does.
Rob.
|
|
rich26
Newbie
|
30. April 2005 @ 13:57 |
Link to this message
|
|
Hi, I brought one of these pci cards a while ago from ebay, it came with the software version v1.2, which was crap
I have just installed the latest version V2.1 from the Jetway website, This software looks better but the sound is all broken up, it is the same on all channels, but when I record and play back my recording the sound is fine!
Can any one help please?, I tried uninstalling and installing the original software V1.2 to test the card and the sound is fine.
Is there some other software that will work with this card?
|
|
eustud
Newbie
|
30. April 2005 @ 14:58 |
Link to this message
|
|
after reading blob33 comment i too removed my version of Powerproducer and while doing so it asked if i wanted to remove several file types(.ax and .dll) i did so and now the "cannot find mpeg muxer interface" does not appear and it reecords and plays back mpeg2-ps format. so thanks rob uv solved it.
|
|
lionslair
Newbie
|
15. October 2005 @ 20:51 |
Link to this message
|
|
After searching and trying everything this too also proved to be the reason why my mine stopped recording. I have a IN-VISION PCI DIGITAL TV TUNER CARD PRODUCT CODE: AVL670
Must be the same card because it is exactly the same solution and symptoms.
I have found that Power Producer 2 Gold is the only software that will take the recorded mpeg2 files and make them directly into a video DVD so what have other people done to now produce DVD's from your recorded tv epesodes?
|
|
Advertisement
|
|
|
|
lionslair
Newbie
|
17. October 2005 @ 00:43 |
Link to this message
|
|
If we can't use power producer 2 gold then what do you other people use to make your videos into DVD's then burn them on DVD then?
|
