Dbox In Ireland

Used files from mgb17's post & all working again....

 

My keylist.txt now looks like this:

N 5401 01 7375C3CC596DDFFA ; ROM7 AU Key Time Tue Apr 8 18:56:19 2008
N 5401 00 067AF388D22415FD ; ROM7 AU Key Time Tue Apr 8 18:56:19 2008
N 5401 01 7375C3CC596DDFFA ; ROM10 AU Key Time Tue Apr 8 18:55:03 2008
N 5401 01 7375C3CC596DDFFA ; ROM10 AU Key Time Tue Apr 8 18:54:50 2008
N 5401 01 7375C3CC596DDFFA ; ROM7 AU Key Time Tue Apr 8 18:54:39 2008
N 5401 01 7375C3CC596DDFFA ; ROM7 AU Key Time Tue Apr 8 18:54:27 2008
N 5401 01 7375C3CC596DDFFA ; ROM10 AU Key Time Tue Apr 8 18:53:07 2008
N 5401 01 7375C3CC596DDFFA ; ROM10 AU Key Time Tue Apr 8 18:52:58 2008
N 5401 01 7375C3CC596DDFFA ; ROM7 AU Key Time Tue Apr 8 18:52:47 2008
N 5401 01 7375C3CC596DDFFA ; ROM7 AU Key Time Tue Apr 8 18:52:34 2008
N 5401 01 7375C3CC596DDFFA ; ROM10 AU Key Time Tue Apr 8 18:51:16 2008
N 5401 01 7375C3CC596DDFFA ; ROM10 AU Key Time Tue Apr 8 18:51:07 2008
N 5401 01 7375C3CC596DDFFA ; ROM7 AU Key Time Tue Apr 8 18:50:54 2008
N 5401 01 7375C3CC596DDFFA ; ROM7 AU Key Time Tue Apr 8 18:50:42 2008
N 5401 01 540D8109F96E17F9 ; ROM7 AU Key Time Thu Apr 3 19:34:34 2008
N 5401 01 08B4975BE2D9410B ; ROM7 AU Key Time Tue Mar 25 18:54:09 2008
N 5401 00 067AF388D22415F5 ; ROM7 AU Key Time Thu Apr 3 20:12:07 2008
N 5401 01 7375C3CC596DDFFA ; ROM7 AU Key Time Tue Apr 8 17:52:53 2008

 

You already posted the fix! cheers, look at your starview code and the dbox update, only one digit is wrong, at the end it is D and should be 5.

you can go into tuxbox commander and change it as mentioned before. The following guide was posted before, I just updated it with the new key that is giving problems

A GUIDE ONLY FOR PEOPLE AFRAID OF PCS
If the D Box goes down and the only channels you have left are RTE 2, TV3 , Channel 6 etc., don’t do a service scan, if you do you will lose most of your channels and it makes it more difficult to get them back.

NOTE: When I refer to scroll in text below, I mean using the Toggle buttons that are around the OK button on the remote control, the button below the OK you use to scroll down, the one above use to scroll up and down, the buttons to the left & right you use to move left & right. If you make a mistake and you want to go back to the start, press the home button and don’t save changes. To get started follow instructions below:

1
. Press the blue button and you will be in the features menu, scroll to Tuxbox Commander, press OK.

You should now be looking at the files on the D Box.

2
. Scroll to VAR and press ok, If you don’t see VAR, scroll to <DIR> & press ok, if you still don’t see VAR scroll to the next <DIR> and press ok, keep doing this until VAR appears on the screen!

3
. When you find the VAR file and you press OK, scroll to Keys & press OK

4
. Scroll to Keylist.txt and press 4 on your remote control! It is important that you don’t press OK when you scroll to keylist.txt , you must press 4 in order to edit the code that will appear! If you pressed OK in error , just press the Home button and start again.

5.
After pressing 4 you should be looking at a screen with /var/keys/keylist.txt at the top, 4 or 5 codes in the middle and numbers 1 to 9 at the bottom.

6.
Now you need to scroll to the code that you are going to change, e.g old code is as follows:

N 5401 00 067AF388D22415FD ; ROM7 AU Key Time Tue Apr 8 17:52:53 2008 and we need to change it to N 5401 00 067AF388D22415F5 ; ROM7 AU Key Time Tue Apr 8 17:52:53 2008



We are only changing one digit this time, in future you may have to change more digits.

7.
When you have have scrolled to code you want to change press OK, When you press OK, the code becomes slightly larger and the first digit changes colour to red, this is now your cursor!

8
. Scroll to the digit you want to change, and then use the numbers on your remote to change that digit to whatever character you want, e.g. if you want to change the digit to 3 , you press the number 3 button four times until 3 appears, the press ok. The same would apply if you want to change it to 4, you press the number 4 button on your remote four times and press OK.

9
. When you have changed the digit to the new one, press the Home button, it will ask you do you want to save changes, if you are happy with the new change, scroll to yes and press OK.

10
. You should now have changed the code, to get back to the TV screen, press home.

11
. In order for the changes to work you need to reboot, press the D box button and scroll to reboot and press OK. When it reboots you channels should be back!





Now as I mentioned before I had blade and sporster running with autoupdate and they were fine, never changed back while commando did. My sporster image is still set to autoupdate. If it is stable set to autoupdate then it might be best to leave it like that, since it does seem only 1 digit will change at a time so it is very easy to fix.

 

Hi, adm1,I have enetred the codes you posted but everything is still blank apart from RTE2 /TV3. Can you help me please. I have no cable etc for connecting to PC to install new files etc.

 

New working keylist:

Code:

http://rapidshare.com/files/105913012/Keylist.txt

Hope this helps

N 5401 00 067AF388D22415F5 ;ROM7 AU Key Time Tue Apr 8 17:56:46 2008
N 5401 01 7375C3CC596DDFFA ;ROM7 AU Key Time Tue Apr 8 17:49:14 2008
N 5401 00 067AF388D22415FD ;ROM7 AU Key Time Tue Apr 8 17:49:14 2008
N 5401 00 5B7436A3B230CB46 ;ROM7 AU Key Time Thu Apr 3 22:45:19 2008
N 5401 00 5B7436A3B238CB46 ;ROM7 AU Key Time Fri Apr 4 18:35:53 2008

Working again here in D7

 

his keylist is incorrect. You only need the firt 2 lines. The last digits should be 5F5, not 5FD

 

New keys working as of 19.00 NTHELL....
http://rs206.rapidshare.com/files/105913313/Keylist.txt

 

I copied and pasted the above into my keylist ans it works again
Good work adm1

Down with NtHell, carefull now

 

Thanks for the reply and the two files mgb17

Upload both files to var/keys.
Restart evocamd or reboot your box.

http://www.4shared.com/file/43301180/136b63e6/keylist.html

I FTPd them across and did a overwrite of the existing Keylist.txt and camd_cfg. All worked a treat BUT!! once again timed out and lost picture and sound but what is strange is I now have TV3 along with Setanta Ireland,Euronews.

Any other ideas or suggestions would be greatly appreciated...thanks for taking the time...

 

tested and working for commando 9.25

 

Lol bloody typo

 

New keyfile tested and working for Andromeda 2 on Nokia 2x

Originally posted by keyskeys:
---------------------------------------------------------------------
New keys working as of 19.00 NTHELL....
http://rs206.rapidshare.com/files/105913313/Keylist.txt
---------------------------------------------------------------------

 

look at 00 and 01 the codes above are a bit upside down..

key 00 is 067AF388D22415FD
key 01 is 7375C3CC596DDFFA

 

all off in cork aswell again, any new working keylist for chokus?

 

# NTL
N 5401 00 067AF388D22415F5 ;
N 5401 01 7375C3CC596DDFFA ;
# Chorus
N 5E01 00 2F1BD4E33411436E ;
N 5E01 01 AA2378B056780DE1 ;

 

Thanks Ruprect for the instructions v handy rather than connecting cross over cable... , and thanks darconio, keys working in D15
cheers

 

It was not a typo, it updated with one wrong digit, same as the other day.

adm1 posted a keylist file with the 2 versions. This is what is strange. The keylist did not work for slunk but did work for you (robio)
please let me know what image you are both running. I think commando might only be reading the first 2 lines or something, and maybe other images are fine as long as the correct keys are somewhere in there.

 

is there an image which will work in ireland autoupdate when the keys roll? Or is it a case of manul updates no everytime? I use commando v2 but have never gotten a sportser image to work in dublin?

What has changed as the dbox2 has been working perfect for almost 2 years always autoupdating?

 

UPC changed the keyroll method.

 

Cheers ruprect I'm up and running......great guide!!!