Eurovox flashing step by step.

You are THE MAN!!!!
Thanks for all your help, I suppose I won't get any sleep for a week until the novelty wears off!

 

Ive tried ha also and think Ive come to the conclusion hat the cable i faulty.
Is there any way I can attach the screen dumps to show you the messages

 

Mikeesone0 your welcome mate, glad you got there in the end!

Unlikly a cable fault in my opinion but yes you can attach the pics using photo hosting site eg like ph0t0bucket, upload the pic then copy the URL and when posting on here click on the "Add Image" when posting, eg

pressing the add image will give you this,

copy the url from the host site and paste it between

 

hi is there a firmware download for the eurovox tx. is the set up the same..

 

have a look in here firmware and loader eurovox tx

 

I've got a Eurovox MaxV that I'm having trouble with. I got it around Xmas and it's been working perfectly, around I went away for a few months and lent the box to my friend. I've not gotten it back and it didn't have any channels on it. Having followed the guide on the first page to the letter, it still won't pick up any channels. The cable going into the box is good, since I get channels on my TV when I plug it in. When I do the scan it's just not picking anything up. Can anyone help me please or know what's going on?

 

Who was your provider previous to VM and what is your location? also what symbol rate did you use?

 

Hi,
I'm having trouble with the epg on the EX5000. First of all the time on it was wrong but the programs were right. So if Coronation St was on at 1930 the epg would say it was 1830 and that Coronation St was on at 1830 (which wasn't too much of a problem). But when I then changed the time to the correct time the epg showed the correct time but the wrong programs. Then lately for the majority of channels the epg is just blank. Is there any way to sort this out? Any help appreciated. Thanks

 

Are you in Ireland?

 

Hi, i would like some help if possible.
I have just got Virgin media installed phone line with basic free tv package and VBox.
I have bought a Eurovox ex1000sl off reputable seller on Ebay.Black unit with red or blue light as only display. I have connected via the cable and rf adaptor to the RF in on the box and scart to tv.
I have downloaded the UFL software to it. Done the factory reset and tried to scan using my sybol rate set to 6887 for stockport.
I cannot get any channels at all once finished scanning. i got message "no channels" i tried again and got bad signal or no signal. also the "quality" bar at bottom of screen is red and does not get above 8% ??
When scanning the level and quality bars are either red or green with various %
Sorry if its confusing, any help gretly apreciated

 

Stockport is exC&* scan with symbol rate 6952. Do a factory reset first though.

 

ok thanks will try that (the symbol rate download said 6887) by the way exC&* ???

 

Just change it to 6952 after factory reset. exC&* is ex Cable & Wire****, thats what it was before VM.

 

Hi, I have followed the steps above for the EUROVOX EX5000 PVR and installed the software but it only finds 11 channels.

I used the sym rate: 6.952 (I live in Surbiton and it was blank on the list) the cable provider is VM and was Telewest before that.

When it scanned the bit that said TP 0000 changed to TP 0001 (no idea what that is). So anyway, it only finds 11 channels not even the standard channels such as BBC and other free channels.
I use a splitter.

Please can someone help?
Many thanks.

 

That worked, got the lot.
Many thanks sc0user !!

 

Youre welcome

 

Take the splitter away and scan from the direct feed. Use the same symbol rate, start at 115.000Mhz and end at 670.000Mhz.

 

I did a power scan from 100.000Mhz - 800.000Mhz+ and it's still the same 11 channels eg. discovery and animal planet.
Still no BBC etc

Any more suggestions?

 

Please help! I have downloaded Firmware from your link onto my PC and followed instructions to run the UFL eurovox pvr program. When I click on download the next box opens and has COM3 in the space and when I click Start everything freezes and I cannot close any of the boxes.

 

conis

What operating system are you running? also are you using a USB adaptor along with the null modem cable.