GUIDE : How to use popsloader :)
#351
08 May 2009 @ 23:11
will_i_am
Send private message to this user
Newbie
excuse..im noob
im using 4.01 m33-2 slim
i have done the ff:
-DL, extract, and copy the seplugin to the root of my PSP memo stick
-DL, extract and copy the newpsardumper folder to F:\PSP>GAME
-DL and copy 372.PBP to the root of my PSP memo stick
afterwards, it just say "Corrupted data"
i tried many options such as:
-instead of seplugin i just copied poploader folder to the root
-instead of copying only the newpsardumper.. i copied the [m33_psardumer] folder
yet, it was still the same
pls help me....thx
im using 4.01 m33-2 slim
i have done the ff:
-DL, extract, and copy the seplugin to the root of my PSP memo stick
-DL, extract and copy the newpsardumper folder to F:\PSP>GAME
-DL and copy 372.PBP to the root of my PSP memo stick
afterwards, it just say "Corrupted data"
i tried many options such as:
-instead of seplugin i just copied poploader folder to the root
-instead of copying only the newpsardumper.. i copied the [m33_psardumer] folder
yet, it was still the same
pls help me....thx
#352
09 May 2009 @ 1:12
If it's corrupted data, then most probably, you must've put the entire downloaded folder in your PSP
You're downloading THIS file right ???
After extracting, you'll get a folder named "new_psardumper" and "src", juz copy the "new_psardumper" folder to you're ms0:\PSP\GAME folder of your PSP ^^
You're downloading THIS file right ???
After extracting, you'll get a folder named "new_psardumper" and "src", juz copy the "new_psardumper" folder to you're ms0:\PSP\GAME folder of your PSP ^^
This message has been edited since its posting. Latest edit was made on 09 May 2009 @ 1:14
#353
09 May 2009 @ 2:38
Pnknjnk
Junior Member
Followed the guide exactly, when attempting to load any other firmwares besides original from flash, I get:
The game could not be started
(8002013C)
I'm trying to play Diablo 1, which lists perfect compatability on the list, but will not load past the diablo loading screen at the beginning after the splash images. This exact same image has worked previously, when I had 3.71 firmware.
I would really like to resume my saved game asap, I'm tired of trying to troubleshoot.
Running 5.00 m33-6
32gb photofast memcard
many other PS1 games load fine normally, this one will not.
Running game cats, but diablo is in the original GAME folder. It's ticking me off. If I change it back to original firmware, it's works but won't load. Grrrrrrrrrrr.
My pops stuff is in x:/seplugins/Popsloader
It doesn't work at all.
Help?
The game could not be started
(8002013C)
I'm trying to play Diablo 1, which lists perfect compatability on the list, but will not load past the diablo loading screen at the beginning after the splash images. This exact same image has worked previously, when I had 3.71 firmware.
I would really like to resume my saved game asap, I'm tired of trying to troubleshoot.
Running 5.00 m33-6
32gb photofast memcard
many other PS1 games load fine normally, this one will not.
Running game cats, but diablo is in the original GAME folder. It's ticking me off. If I change it back to original firmware, it's works but won't load. Grrrrrrrrrrr.
My pops stuff is in x:/seplugins/Popsloader
It doesn't work at all.
Help?
HE;LP
#354
09 May 2009 @ 3:38
0x8002013c is a "Library not found" error
Which most probably IMO means that the popsloader doesn't find the files required for that specific pops to run
eg : You're trying to run the 3.71 pops, but the 3.71 pops isn't there
Most probably you must've not renamed the pops files with the prefix of it's corresponding firmware [pops371.prx etc.]
Or may be you must've extracted the encrypted pops files instead of the decrypted one
Also, make sure you've put the impose.prx file in you're popsloader folder [You can get it by decrypting the 4.01 firmware]
EDIT : Also, from the compatibility list I posted in the guide, it's given that Diablo works fine on the 5.00m33-6 firmware
Which most probably IMO means that the popsloader doesn't find the files required for that specific pops to run
eg : You're trying to run the 3.71 pops, but the 3.71 pops isn't there
Most probably you must've not renamed the pops files with the prefix of it's corresponding firmware [pops371.prx etc.]
Or may be you must've extracted the encrypted pops files instead of the decrypted one
Also, make sure you've put the impose.prx file in you're popsloader folder [You can get it by decrypting the 4.01 firmware]
EDIT : Also, from the compatibility list I posted in the guide, it's given that Diablo works fine on the 5.00m33-6 firmware
This message has been edited since its posting. Latest edit was made on 09 May 2009 @ 3:50
#355
09 May 2009 @ 9:32
Very VERY annoying. It's been a while (2 years) since I've bothered with custom firmwares, and wanted to load a PS1 game...
NOWHERE on your guide do you mention Custom firmware (at least you didn't say CFW).
Now I have a PSP with Sony's 5.0 firmware, and need to wait for a 5.5 firmware to be released by dark alek.
Grrrrr.
NOWHERE on your guide do you mention Custom firmware (at least you didn't say CFW).
Now I have a PSP with Sony's 5.0 firmware, and need to wait for a 5.5 firmware to be released by dark alek.
Grrrrr.
#356
09 May 2009 @ 11:42
Pnknjnk
Junior Member
Well, it doesn't work on 5.00 m33-6.
It says it does, but it doesn't. It used to work on my 3.71. I have all the firmwares from the "lazy" download, shouldn't that have everything I need?
The disc load speed isn't set weird or anything, it simply just doesn't get past that screen at all.
EDIT
I downloaded a TPB torrent of popsloader with more firmware files, it had impose.prx, I believe that was the file I was missing - good call!
It says it does, but it doesn't. It used to work on my 3.71. I have all the firmwares from the "lazy" download, shouldn't that have everything I need?
The disc load speed isn't set weird or anything, it simply just doesn't get past that screen at all.
EDIT
I downloaded a TPB torrent of popsloader with more firmware files, it had impose.prx, I believe that was the file I was missing - good call!
This message has been edited since its posting. Latest edit was made on 09 May 2009 @ 12:29
HE;LP
#357
09 May 2009 @ 13:16
@ shammah1
That's understandable
Doesn't 5.00"m33" popsloader remind you about custom firmware ???
neways, I'll add it if it's causing problem for ppl
@ Pnknjnk
Well, so that solves your problem ^^
I'll have to update the "lazy" popsloader files I guess >.>
Will update it as soon my PC comes back [On dad's lappy right now and can't do much :(]
That's understandable
Doesn't 5.00"m33" popsloader remind you about custom firmware ???
neways, I'll add it if it's causing problem for ppl
@ Pnknjnk
Well, so that solves your problem ^^
I'll have to update the "lazy" popsloader files I guess >.>
Will update it as soon my PC comes back [On dad's lappy right now and can't do much :(]
#358
18 May 2009 @ 18:01
I am running firmware 5.00 m33-4 on a psp fat with a sony memory card and so far no pops menu showing.
i did this;
*i put the new popsloader contents into an empty folder and named it seplugins then transfered it over to my memory card root.
*downloaded almost all custom firmwares since 3.00 and dumped the eboots one by one with no problem. after each eboot dump i copied the necessary .prx files to my pc, renamed them accordingly and then deleted the eboot and F0 folder from the memory card. i did the impose file bit too.
*then i copied over all of the .prx files into the popsloader folder thats within the seplugins folder.
*booted the psp in recovery mode and looked in plugins. I had a single file in there called popsloader 1 which i enabled. should i see more than this under plugins?
so far no popsloader menu even after holding Rtrigger on game boot.
i've seen people talking about vsh.txt files and such but i'm not sure what thats about of if thats something i'm missing.
any suggestions would be greatly appreciated.
i did this;
*i put the new popsloader contents into an empty folder and named it seplugins then transfered it over to my memory card root.
*downloaded almost all custom firmwares since 3.00 and dumped the eboots one by one with no problem. after each eboot dump i copied the necessary .prx files to my pc, renamed them accordingly and then deleted the eboot and F0 folder from the memory card. i did the impose file bit too.
*then i copied over all of the .prx files into the popsloader folder thats within the seplugins folder.
*booted the psp in recovery mode and looked in plugins. I had a single file in there called popsloader 1 which i enabled. should i see more than this under plugins?
so far no popsloader menu even after holding Rtrigger on game boot.
i've seen people talking about vsh.txt files and such but i'm not sure what thats about of if thats something i'm missing.
any suggestions would be greatly appreciated.
#359
18 May 2009 @ 21:00
try downloading the popsloader in my signature and updated to the latest custom firmware and see if that helps.
This message has been edited since its posting. Latest edit was made on 18 May 2009 @ 21:05
PSPVC 3.50: click here IRShell 4.91: click here POPSloader 5.00 M33-2: click here & Compatibility List Hellcats Recovery Flasher: click here
ChickHen R2 & CFW 5.03GEN-A Pandora Battery: Hellcats Pandora Installer or you can buy it from here, here or here
Magic Memory Stick: WinXP use Pandora Deluxe or PSP Grader v008 Vista use TOTALNewbi easyInstaller LEDA Homebrew Loader: click here
Top Guides: click here Official Firmware: click here Custom Firmware: click here Themes: CXMB 3.3 with 30 CTF Themes Emulators: click here
ChickHen R2 & CFW 5.03GEN-A Pandora Battery: Hellcats Pandora Installer or you can buy it from here, here or here
Magic Memory Stick: WinXP use Pandora Deluxe or PSP Grader v008 Vista use TOTALNewbi easyInstaller LEDA Homebrew Loader: click here
Top Guides: click here Official Firmware: click here Custom Firmware: click here Themes: CXMB 3.3 with 30 CTF Themes Emulators: click here
#360
31 May 2009 @ 6:59
Ok...Ive been researching this and trawling through tons of forums trying to get this popsloader working but to no avail...I was wondering if someone can please tell me where I'm going wrong...hopefully I'll be providing all the right info so people can help diagnose this for me.
First off all, I have a slim psp running CFW 5.00 M33-3...I have downloaded pops for FM 4.01 as I'm trying to run Parasite Eve. In the root of my card I have the seplugins folder which contains the folder called popsloader and inside that there's the following files: daxheaparea.prx, idcanager_old.prx, libpspvmc401.prx, pafmini401.prx, pops401.prx, popsman401.prx.
When I boot up in recovery mode by holding the R button, I get the menu that you're supposed to but when I click on the plugins folder I just get an option that says Back. It's like it can't see the popsloader at all...
So where am I going wrong and please advise if I haven't supplied enough info.
First off all, I have a slim psp running CFW 5.00 M33-3...I have downloaded pops for FM 4.01 as I'm trying to run Parasite Eve. In the root of my card I have the seplugins folder which contains the folder called popsloader and inside that there's the following files: daxheaparea.prx, idcanager_old.prx, libpspvmc401.prx, pafmini401.prx, pops401.prx, popsman401.prx.
When I boot up in recovery mode by holding the R button, I get the menu that you're supposed to but when I click on the plugins folder I just get an option that says Back. It's like it can't see the popsloader at all...
So where am I going wrong and please advise if I haven't supplied enough info.
#361
31 May 2009 @ 15:48
download the popsloader in my signature, will solve your problem
PSPVC 3.50: click here IRShell 4.91: click here POPSloader 5.00 M33-2: click here & Compatibility List Hellcats Recovery Flasher: click here
ChickHen R2 & CFW 5.03GEN-A Pandora Battery: Hellcats Pandora Installer or you can buy it from here, here or here
Magic Memory Stick: WinXP use Pandora Deluxe or PSP Grader v008 Vista use TOTALNewbi easyInstaller LEDA Homebrew Loader: click here
Top Guides: click here Official Firmware: click here Custom Firmware: click here Themes: CXMB 3.3 with 30 CTF Themes Emulators: click here
ChickHen R2 & CFW 5.03GEN-A Pandora Battery: Hellcats Pandora Installer or you can buy it from here, here or here
Magic Memory Stick: WinXP use Pandora Deluxe or PSP Grader v008 Vista use TOTALNewbi easyInstaller LEDA Homebrew Loader: click here
Top Guides: click here Official Firmware: click here Custom Firmware: click here Themes: CXMB 3.3 with 30 CTF Themes Emulators: click here
#362
31 May 2009 @ 21:23
Thanx for that...can see it and have enabled it...I have an eboot.phb for Parasite Eve which is in the following location
\PSP\GAME\Parasite Eve\eboot.phb but when I go the Game section on the psp it says corrupt data...what's up with that please??
\PSP\GAME\Parasite Eve\eboot.phb but when I go the Game section on the psp it says corrupt data...what's up with that please??
#363
01 Jun 2009 @ 2:13
you may have made a mistake when creating or dowloading the eboot so try another copy.
PSPVC 3.50: click here IRShell 4.91: click here POPSloader 5.00 M33-2: click here & Compatibility List Hellcats Recovery Flasher: click here
ChickHen R2 & CFW 5.03GEN-A Pandora Battery: Hellcats Pandora Installer or you can buy it from here, here or here
Magic Memory Stick: WinXP use Pandora Deluxe or PSP Grader v008 Vista use TOTALNewbi easyInstaller LEDA Homebrew Loader: click here
Top Guides: click here Official Firmware: click here Custom Firmware: click here Themes: CXMB 3.3 with 30 CTF Themes Emulators: click here
ChickHen R2 & CFW 5.03GEN-A Pandora Battery: Hellcats Pandora Installer or you can buy it from here, here or here
Magic Memory Stick: WinXP use Pandora Deluxe or PSP Grader v008 Vista use TOTALNewbi easyInstaller LEDA Homebrew Loader: click here
Top Guides: click here Official Firmware: click here Custom Firmware: click here Themes: CXMB 3.3 with 30 CTF Themes Emulators: click here
#364
01 Jun 2009 @ 4:34
It was a download and the creator swears to its legitimacy...this is what it says in the ReadMe file:
"YOU MUST USE THE POPSLOADER FOR THIS RELEASE TO WORK!!!....The Proper pops to use to run the game is 3.30 pops
for BOTH GAMES.... This will bring you a graphics-glitch-free conversion... I have worked on these 2 games for
1 week straight since there is no other working copies out there I have finally brought you one that is
guaranteed to work..... All I ask in return is a " Thank You " comment........KloWn (Kingdom RG)"
There was also zipped file containing the seplugins folder with the contents of ShaggyZe's Poploader download as linked in his signature...I'm xferring the entire folders called Parasite Eve Disc 1 and Parasite Eve Disc 2...but still shows up as corrupt data!!!
Also one last thing and it's prolly gonna sound like an Rtard but do I go to the Game section as if I'm loading a PSP ISO but instead choose the PSX game?? I can't even get this popsloader menu to come up that everyone keeps talking about and I have enabled the popsloader by rebooting and holding R and making sure it says Enable next to the name. :)
"YOU MUST USE THE POPSLOADER FOR THIS RELEASE TO WORK!!!....The Proper pops to use to run the game is 3.30 pops
for BOTH GAMES.... This will bring you a graphics-glitch-free conversion... I have worked on these 2 games for
1 week straight since there is no other working copies out there I have finally brought you one that is
guaranteed to work..... All I ask in return is a " Thank You " comment........KloWn (Kingdom RG)"
There was also zipped file containing the seplugins folder with the contents of ShaggyZe's Poploader download as linked in his signature...I'm xferring the entire folders called Parasite Eve Disc 1 and Parasite Eve Disc 2...but still shows up as corrupt data!!!
Also one last thing and it's prolly gonna sound like an Rtard but do I go to the Game section as if I'm loading a PSP ISO but instead choose the PSX game?? I can't even get this popsloader menu to come up that everyone keeps talking about and I have enabled the popsloader by rebooting and holding R and making sure it says Enable next to the name. :)
This message has been edited since its posting. Latest edit was made on 01 Jun 2009 @ 5:16
#365
01 Jun 2009 @ 9:44
well you have done everything right so it should be working so.
try backup up your memory stick and formatting it with the psp in the system settings then goto the recover menu under advanced and format flash1 and reset settings then try installing popsloader and ensuring its on under the plugins section then try the psx game.
try backup up your memory stick and formatting it with the psp in the system settings then goto the recover menu under advanced and format flash1 and reset settings then try installing popsloader and ensuring its on under the plugins section then try the psx game.
PSPVC 3.50: click here IRShell 4.91: click here POPSloader 5.00 M33-2: click here & Compatibility List Hellcats Recovery Flasher: click here
ChickHen R2 & CFW 5.03GEN-A Pandora Battery: Hellcats Pandora Installer or you can buy it from here, here or here
Magic Memory Stick: WinXP use Pandora Deluxe or PSP Grader v008 Vista use TOTALNewbi easyInstaller LEDA Homebrew Loader: click here
Top Guides: click here Official Firmware: click here Custom Firmware: click here Themes: CXMB 3.3 with 30 CTF Themes Emulators: click here
ChickHen R2 & CFW 5.03GEN-A Pandora Battery: Hellcats Pandora Installer or you can buy it from here, here or here
Magic Memory Stick: WinXP use Pandora Deluxe or PSP Grader v008 Vista use TOTALNewbi easyInstaller LEDA Homebrew Loader: click here
Top Guides: click here Official Firmware: click here Custom Firmware: click here Themes: CXMB 3.3 with 30 CTF Themes Emulators: click here
#366
01 Jun 2009 @ 18:01
Did that...still nothing...still shows as corrupt data...is there a really simple PSX game that literally no one has any issues with this...maybe Parasite Eve is too complicated or something? Thanks for your help BTW :)
#367
02 Jun 2009 @ 3:51
I'm having mad issues running Digimon World 3 via pops... I dunno what to do cause I've tried every darn thing that I have read and has been suggested! Running CFW 5.00 M33-6, and people said use pops3.71. I tried but it leaves me with black screen!
Am I missing files or something? Any help would be mad awesome since this was the guide that taught me how to pops!
Am I missing files or something? Any help would be mad awesome since this was the guide that taught me how to pops!
#368
08 Jun 2009 @ 6:19
Hi guys, I have a problem trying to load this popsloader.
I am using PSP Slim and my version is 5.00 M33-3. When the guide says ROOT folder, does that mean "MP_ROOT"? Because I don't see any ROOT folder in my PSP.
I am using PSP Slim and my version is 5.00 M33-3. When the guide says ROOT folder, does that mean "MP_ROOT"? Because I don't see any ROOT folder in my PSP.
#369
08 Jun 2009 @ 8:54
there is no root folder; root folder is just a term used when saying the beginning of a drive so "x:\" is the root folder x being your psp memort stick and their should be a seplugins folder that you put popsloader into and pops.txt and then enabled popsloader.prx in your recovery menu, if you need the latest popsloader files download the pack in my signature.
PSPVC 3.50: click here IRShell 4.91: click here POPSloader 5.00 M33-2: click here & Compatibility List Hellcats Recovery Flasher: click here
ChickHen R2 & CFW 5.03GEN-A Pandora Battery: Hellcats Pandora Installer or you can buy it from here, here or here
Magic Memory Stick: WinXP use Pandora Deluxe or PSP Grader v008 Vista use TOTALNewbi easyInstaller LEDA Homebrew Loader: click here
Top Guides: click here Official Firmware: click here Custom Firmware: click here Themes: CXMB 3.3 with 30 CTF Themes Emulators: click here
ChickHen R2 & CFW 5.03GEN-A Pandora Battery: Hellcats Pandora Installer or you can buy it from here, here or here
Magic Memory Stick: WinXP use Pandora Deluxe or PSP Grader v008 Vista use TOTALNewbi easyInstaller LEDA Homebrew Loader: click here
Top Guides: click here Official Firmware: click here Custom Firmware: click here Themes: CXMB 3.3 with 30 CTF Themes Emulators: click here
#370
12 Jun 2009 @ 18:48
A couple ?'s:
Where is this ms0 thing? (ms0:/seplugins/popsloader.prx 1)
I was assuming the ms0 was my drive letter for the psp....?<----sorry, ms0 is Memory Stick Root....how could I forget?!
Do i physically have to create the seplugins folder because I don't see that folder in the files i extracted for 5.00 above?
To clarify, I don't need all the CFW's to use the parts in step 3, I just need to DL all those for the specific PSX games I want to run, correct?
Also, in step 8, that's for the items I DL in step 3? Or, are those things I need to do if i didn't have the 5.00CFW?
Thanks!
Where is this ms0 thing? (ms0:/seplugins/popsloader.prx 1)
I was assuming the ms0 was my drive letter for the psp....?<----sorry, ms0 is Memory Stick Root....how could I forget?!
Do i physically have to create the seplugins folder because I don't see that folder in the files i extracted for 5.00 above?
To clarify, I don't need all the CFW's to use the parts in step 3, I just need to DL all those for the specific PSX games I want to run, correct?
Also, in step 8, that's for the items I DL in step 3? Or, are those things I need to do if i didn't have the 5.00CFW?
Thanks!
This message has been edited since its posting. Latest edit was made on 12 Jun 2009 @ 18:58
#371
14 Jun 2009 @ 17:31
OK, how about this-
In step 1, which .pbp file am i putting in root folder? I DL's PSAR and I don't see a .pbp file
In step 4, if i DL the firmwares the lazy way, there is no .pbp files in there either. What am I missing?
I have CFW 5.00 M33-2(?) installed already, just trying to get this working yet so i can backup some of my games to take along. Can i simply get all this on my 1GB card and then copy paste over to my 8GB or do I just get it working with this card and then delete like it stated earlier? I imagine it needs the firmware and EBOOT.pbp files...?
In step 1, which .pbp file am i putting in root folder? I DL's PSAR and I don't see a .pbp file
In step 4, if i DL the firmwares the lazy way, there is no .pbp files in there either. What am I missing?
I have CFW 5.00 M33-2(?) installed already, just trying to get this working yet so i can backup some of my games to take along. Can i simply get all this on my 1GB card and then copy paste over to my 8GB or do I just get it working with this card and then delete like it stated earlier? I imagine it needs the firmware and EBOOT.pbp files...?
#373
14 Jun 2009 @ 22:18
well ChickHen R3 will have a vsh menu and plugins support but until then you could use http://pspupdates.qj.net/PSP-homebrew-load-plugins-in-ChickHEN-with-PSPrx-Launcher-v2-2/pg/49/aid/131437 too load plugins for you
PSPVC 3.50: click here IRShell 4.91: click here POPSloader 5.00 M33-2: click here & Compatibility List Hellcats Recovery Flasher: click here
ChickHen R2 & CFW 5.03GEN-A Pandora Battery: Hellcats Pandora Installer or you can buy it from here, here or here
Magic Memory Stick: WinXP use Pandora Deluxe or PSP Grader v008 Vista use TOTALNewbi easyInstaller LEDA Homebrew Loader: click here
Top Guides: click here Official Firmware: click here Custom Firmware: click here Themes: CXMB 3.3 with 30 CTF Themes Emulators: click here
ChickHen R2 & CFW 5.03GEN-A Pandora Battery: Hellcats Pandora Installer or you can buy it from here, here or here
Magic Memory Stick: WinXP use Pandora Deluxe or PSP Grader v008 Vista use TOTALNewbi easyInstaller LEDA Homebrew Loader: click here
Top Guides: click here Official Firmware: click here Custom Firmware: click here Themes: CXMB 3.3 with 30 CTF Themes Emulators: click here
#374
14 Jun 2009 @ 23:23
Reading above, it looks like I may need the DL in your signature, but when I click on it I get a server error. Is it still available?
#375
15 Jun 2009 @ 0:17
thanks for pointing that out, i'll reup it and post when the link is working again
PSPVC 3.50: click here IRShell 4.91: click here POPSloader 5.00 M33-2: click here & Compatibility List Hellcats Recovery Flasher: click here
ChickHen R2 & CFW 5.03GEN-A Pandora Battery: Hellcats Pandora Installer or you can buy it from here, here or here
Magic Memory Stick: WinXP use Pandora Deluxe or PSP Grader v008 Vista use TOTALNewbi easyInstaller LEDA Homebrew Loader: click here
Top Guides: click here Official Firmware: click here Custom Firmware: click here Themes: CXMB 3.3 with 30 CTF Themes Emulators: click here
ChickHen R2 & CFW 5.03GEN-A Pandora Battery: Hellcats Pandora Installer or you can buy it from here, here or here
Magic Memory Stick: WinXP use Pandora Deluxe or PSP Grader v008 Vista use TOTALNewbi easyInstaller LEDA Homebrew Loader: click here
Top Guides: click here Official Firmware: click here Custom Firmware: click here Themes: CXMB 3.3 with 30 CTF Themes Emulators: click here
Share this
