Totally agree with oggnogg, the codes are going to keep changing on a more regular basis, so you need to update your boxes with the new nagrarom7 file. I've done this and it's working sound for the past week. I know this has been detailed before but some people can't be arsed reading through this thread so here's the steps again.
1. Get a crossover cable (Maplins in dublin, argos, ebay etc.)
2. Get a
FTP program (
FlashFXP is what I use).
3. Get the new updated nagrarom files, available in the BigMAQ toolbar, under Update/Fixes - DB*x files - AU Fix. 3 files dated 12th April. Also linked in various posts over the last few pages.
4. Unzip of unrar the nagrarom files so they all have the .bin file extension.
5. Get the IP of your Db*x using the remote.
6. Connect your PC to the Db*x using the crossover cable.
7. Connect to your dbox using your
FTP program maxing sure your PC and db*x are on the same subnet, meaning if your db*x's is 192.168.0.100 (as in most blade images) your pc's IP needs to be set to 192.168.0.x, where x can be any number, just set it to 1.
8. Passwords and user are generally db*x2 and root
9. Copy the 3 new nagrarom files over the existing files on your db*x located in /var/keys. If you're in the
right place the program will probably warn you that you are overwriting each of the 3 files, confirm this action.
9. Disconnect from the db*x
10. Plug into your telly, turn on, happy days.
11. If you're not getting all the channels go to the all in wonder menu (press db*x on the remote). Make sure that the active soft cam is set to evocam, not gbox or anything else. Also make sure that the 7, 10 and 11 nagraroms are enabled and 3 is disabled. Actvie u code is 14.
12. Restart the db*x.
Some of the above steps might not be needed, In my case all I did was copy over the three files, change soft cam to evocam and restart.
A big thanks to all the guys keeping this excellent forum up to date.
