AfterDawn Forums

Blindwrite problems.

This discussion thread has 2 messages.

#1
Ok, trying to burn a DVD image with blindwrite 5.2.10. Never used 5.2.10 before so only just istalled it.

Now the DVD image was downloaded, and it mounts fine in Daemon Tools and installs fine so the image is ok (i assume).

But when i go to burn it, the progress bar never changes. The light on the burner flashes 10 or so times at the start then does nothing for 6-7mins then flashes so more at which point Blind write says burn completed in 8mins33seconds or whatever. Now the DVD only has a thin band of data burnt onto it even tho the image is 3.06GB and windows says there is no disk in the drive when its inserted.

I have tried burning it twice with a restart in between so im stumped as to what is causing this. It apparently starts to burn fine, 8 or so minutes later it says it burnt succesfully. But the dvd is cactus.

I have tried burning other DVD images in nero afterwards and all that is fine.

Any ideas?
Thanks
▼▼ This topic has 1 answers - they are below this advertisement ▼▼
AfterDawn Advertisement
#2
Ok, here is the log which i get when it fails.
Any ideas what the error means?

22/03/2005 11:02:19 PM info ******************** Report session closed *********************
22/03/2005 10:59:58 PM info Writing completed in 08:13
22/03/2005 10:59:57 PM info Finalize started
22/03/2005 10:59:57 PM error (MMCWriteSector) write Failed after Timeout at sector 2256 after 36001 retries : Code 02 04 08 [NOT READY, Long write in progress]
22/03/2005 10:53:56 PM info Lead-in burning time (mS) 130116.478
22/03/2005 10:51:46 PM info Write started
22/03/2005 10:51:46 PM info Buffer Under-run protection is enabled
22/03/2005 10:51:46 PM info Media topology will be embedded in Autoplay
22/03/2005 10:51:46 PM info Backup tagged for Autoplay
22/03/2005 10:51:46 PM info Writing speed requested x2.0, effective x2.0
22/03/2005 10:51:45 PM info Media ID : TTG02
22/03/2005 10:51:45 PM info Writing DVD-ROM Disc [SNOWBLIND] - Image Size 3.06 Gb.
22/03/2005 10:51:45 PM info Writing device : 1:2:0 - SONY DVD RW DRU-510A 1.1a [J] (Ide)
22/03/2005 10:50:52 PM info BWT 5 file contains topology data: Quality 100%
22/03/2005 10:50:46 PM info Launched with external parameters
22/03/2005 10:50:46 PM info Using Patin-Couffin driver Version 1.27, Internal revision 27 - Async. Access mode
22/03/2005 10:50:46 PM info Autoplay driver active. Version 6
22/03/2005 10:50:46 PM info ParamStr 2 = "C:\WINNT\bw5.ini"
22/03/2005 10:50:46 PM info ParamStr 1 = "/ini"
22/03/2005 10:50:46 PM info ParamStr 0 = "C:\Program Files\VSO\BlindWrite5\bw.exe"
22/03/2005 10:50:46 PM info User default language : 3081 (0x0C09h) - English (Australian)
22/03/2005 10:50:46 PM info System default language : 1033 (0x0409h) - English (United States)
22/03/2005 10:50:46 PM info Version 5.2.10.142
22/03/2005 10:50:46 PM info ExeName : "C:\Program Files\VSO\BlindWrite5\bw.exe"
22/03/2005 10:50:46 PM info OS : Microsoft Windows 2000 Professional Service Pack 4 (Build 2195)
22/03/2005 9:08:39 PM info ******************** Report session closed *********************
22/03/2005 9:08:16 PM info BWT 5 file contains topology data: Quality 100%
22/03/2005 9:08:16 PM info Using Patin-Couffin driver Version 1.27, Internal revision 27 - Async. Access mode
22/03/2005 9:08:16 PM info Autoplay driver active. Version 6
22/03/2005 9:08:16 PM info ParamStr 1 = "V:\PC.Project.Snowblind.1DVD\vng-psb\SNOWBLIND.B5T"
22/03/2005 9:08:16 PM info ParamStr 0 = "C:\Program Files\VSO\BlindWrite5\Bw.exe"
22/03/2005 9:08:16 PM info User default language : 3081 (0x0C09h) - English (Australian)
22/03/2005 9:08:16 PM info System default language : 1033 (0x0409h) - English (United States)
22/03/2005 9:08:16 PM info Version 5.2.10.142
22/03/2005 9:08:16 PM info ExeName : "C:\Program Files\VSO\BlindWrite5\Bw.exe"
22/03/2005 9:08:16 PM info OS : Microsoft Windows 2000 Professional Service Pack 4 (Build 2195)
This discussion thread has been automatically closed, as it hasn't received any new posts during the last 180 days. This means that you can't post replies or new questions to this discussion thread.

If you have something to add to this topic, use this page to post your question or comments to a new discussion thread.