i just finish installing my x3 on my 1.6 thing is on the main menue for x3 ce were it hase enable network flashing, load bios. ect.... i cant move up or down and idk if my bios work or not. FlashBIOS3.0.1
3.0.1 is what the chip comes with, i updated mine to 3.0.3, and then u have to load a X3 version 3029. And the golden warthog is true, but all it is, is a skin. U can get it all here: http://www.x-b-o-x.net/modules/mydownloads/ Get the download that says X3 3029 and that should do it. And about the up/down thing. if u r using a wireless controller then that is the problem, because i was not able to use my wireless controller when i had to flash my chip, so u have to use a normal controller. after u flash it u can use the other controller
And when u flash it, use http flash, its easy, thats what i used. all u have to do is select that ( ur xbox has to be connected to the internet), click on network flashing, it will give u a ip address, put the address into internet explorer as http://your ip. then just click browse and click on the x3 3029 and then click upload ans flash and then ur xbox will turn off by itself. Just turn it back on. And also make sure that ur flash protect is off ont the chip and switch
