starview problem?

i get you now thanks , seemed to have picked up the chanels during the scan but with no sound or picture

 

every time u factory reset u need to switch emu on
menu 1570 emu to on and exit 3 times

 

If you have the pipe direct to the box then you dont have to worry about splitters ect,

question I have a PVR starview the version is E_ver4.000,8 jun 2007
Can someone tell me the fixes that the new firmware address

I have a prob that the box will intermittantly only record 10 mins of a selected program

Thanks bulld

 

thanks a mill for the help , all's sorted now , just curious to no if there's any firmware to arrange the channels alphabeticly as you scroll through them

 

Yes you can download the bin file,
but it was recomended to me to sort them yourself
in the menu you will find channel edit ( have a play with it it is easy enough)
bulld

 

look for celtics logo a few posts up and click on eko 4 shared.com and click on starview,info all there and starview dump files

 

Hi can someone help a clone box has v2.57 software installed
What software needs to be loaded to make it auto update and where do you get it (ekofor shared )?
Best regards
Ger

 

You'll need 2.57 FIXED firmware to auto update and yes you get it here http://eko.4shared.com/

 

i have a real starview box but i mssed it up and was wondering where i can get the files i need to put back on to it can any1 help ???

 

Yep look in Eamos FTA Libray at the end of my link all you need is there.

 

which files do i need to put onto box? im kinda new to sortin this stuff out ????????

 

I know you say you have a genuine box, but better check first.

Please click the SV EV Info link at the end of my post to compare clone V genuine boxes.

You will need a null modem cable DB9F to DB9F.

Null modem info

http://www.maplin.co.uk/Search.aspx?criteria=L71BT&DOY=2m6

If your pc does not have a serial port you will need a USB to serial port adapter to use in conjunction with the null modem cable.

USB Adapter info

http://www.maplin.co.uk/Module.aspx?Modu...daptor class=

These two cable links are only for reference as they can be purchased alot cheaper on fleabay.

All firmware/loader can be found in the link at the end of my post marked Eamos FTA Library.

You will need the GTromloader V4, (Starvi*w Software Uploader), found in the Starvi*w software folder of the link.

You will need version 4.00 firmware for GENUINES found in "Starvi*w" firmware folder.
OR
You will need version 2.57_FIXED firmware for CLONES found in "Starvi*w" firmware folder.


Updating Firmware

Connect your box and PC with a Null modem cable and switch on the cable box and put it on STANDBY.
(The Starview does not need to be connected to TV to update it with GTROM)

Open GTROM Loader software make sure that you set the correct COM PORT
that matches the one that is being used

Make sure App file only is selected, then click Bin File & browse to the firmware where you downloaded it to on your PC.

Run the GTROM loader by pressing Download and you will see the % progress increase
then Download completed message on your PC.
Wait until you see the DOWNLOAD COMPLETE pop up on your PC before
removing the NULL MODEM CABLE. The Starvi*w will then reboot

Turn off and turn back on , then plug your tv cable and scart back in

 

cheers man am pretty sure i dont have the clone the back of the box looks like the good one but the pic of the 2 remote controls u have both look the same i have it ages anyhow and was copying info off my box onto another and i fucked up my one thanx for the help nice little site u have set up will let u know how i get on thanx again

 

No problem at all, not my site by the way just a community of a lot of helpful people. BTW I would edit out the language bit

 

Scouser

cheers man thanx for the help much appreciated been lost without it

 

hello guys,

i need your help....i just got a starview 2 and at the first auto search of the channels at the installation i got 186 channels but only 34 visible....do u know what i should do?....

 

Press Menu then 1570 and turn the EMU key ON
Exit back to viewing

If that doesnt work ,

press Menu then System Information and tell us what the API is please

 

Hi, need some help please. am unable to get anything on my starview box, have done numerous auto scans & reset the codes. it starts with'no signal',& after a scan i get 'scrambled channels'. (box was switched off for 2 weeks until 29th Jan by the way). thanks

 

Have you input the latest codes as I presume you dont have auto rolling firmware and put your key emu on?