Yep and I did it like 3 times and it says that the drivers are loaded correctly Driver : Aspi32 Description : ASPI for WIN32 Kernel Driver Version : 4.71 (0002) Company : Adaptec Driver : atapi Description : n/a Version : n/a Company : n/a ASPI Information ---------------- System ASPI : ASPI is installed and working properly WNASPI32.DLL : 4.71 (0002) 45056 bytes November 13, 2005 ASPI32.SYS : 4.71 (0002) 16877 bytes November 13, 2005 WINASPI.DLL : n/a 4455 bytes November 13, 2005 WOWPOST.EXE : n/a 3535 bytes November 13, 2005 Nero ASPI : ASPI is installed and working properly wnaspi32.dll : 2.0.1.74 164112 bytes November 02, 2004
I had the same problem with Nero Audio cds was my problem worked sound for ages then went Pete Tong if you got ant Nvidia <nvatabus> ide drivers get shot of them use the drivers built into windows ive posted two logs so you can see the diff betwee them hope this helps. Brian log 6 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00 ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:32 Nero Version: 6.6.0.8 (Nero Express) Recorder: <SONY DVD RW DRU-800A> Version: KY03 - HA 2 TA 3 - 6.6.0.8 Adapter driver: <nvatabus> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <PHILIPS PBDV16LSP1 >Version: B1.8 - HA 0 TA 0 - 6.6.0.8 Adapter driver: <ultra> HA 0 === Scsi-Device-Map === CdRomPeripheral : PHILIPS PBDV16LSP1 B1.8 ultra Port 0 ID 0 DMA: Off OtherPeripheral : SI Pseudo Device 0000 Si3114r5 Port 1 ID 16 DMA: Off DiskPeripheral : Maxtor 6L200P0 nvatabus Port 2 ID 0 DMA: Off DiskPeripheral : SAMSUNG SP1614N nvatabus Port 2 ID 1 DMA: Off CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B nvatabus Port 2 ID 2 DMA: Off CdRomPeripheral : SONY DVD RW DRU-800A nvatabus Port 2 ID 3 DMA: Off DiskPeripheral : SAMSUNG SP1614C nvatabus Port 3 ID 0 DMA: Off === CDRom-Device-Map === PHILIPS PBDV16LSP1 K: CDRom2 HL-DT-ST DVDRAM GSA-4163 D: CDRom0 SONY DVD RW DRU-800A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1047856kB) Free physical memory: 669MB (685900kB) Memory in use : 34 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 17.11.2005 Audio CD 10:30:12 #1 CDADOC -1 File Cdadoc.cpp, Line 1465 Audio item log info: Audio document burn settings: ============================= Burn mode: DAO, CD Text: On, Cache disk or network files: No, Cache small files: No, Cache files smaller than 65536 bytes. Audio Multisession: No List of audio tracks: ===================== Track 01: Length: 03:39.04, Pause frames: 150, Filters: 3, Name: '02. Push The Button (Sugababes).mp3'. Track 02: Length: 03:44.74, Pause frames: 000, Filters: 3, Name: '03. What You Waiting For (Gwen Stefani).mp3'. Total size: 07:26.03 10:30:12 #2 Text 0 File Burncd.cpp, Line 2868 SONY DVD RW DRU-800A Power-Burn activated 10:30:12 #3 Text 0 File Reader.cpp, Line 127 Reader running 10:30:12 #4 Text 0 File Writer.cpp, Line 122 Writer SONY DVD RW DRU-800A running 10:30:12 #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 10:30:12 #6 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using CD-R/RW media 10:30:13 #7 Text 0 File DlgWaitCD.cpp, Line 260 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 33302 ( 7:26.02) 10:30:13 #8 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 10:30:13 #9 Text 0 File DlgWaitCD.cpp, Line 2339 Recorder: SONY DVD RW DRU-800A; CDRW code: 00 97 26 65; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D1 00 C6, 2: 61 1A 41 (LI 97:26.65), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 02 4C B0, 2: 4A C8 36, 3: 00 80 80 (invalid) 10:30:13 #10 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:30:13 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_AUDIO_NOPRE (02. Push The Button (Sugababes).mp3) 2 indices, index0 (150) not provided original disc pos #0 + 16429 (16429) = #16429/3:39.4 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 16429 blocks [SONY DVD RW DRU-800A] 1: TRM_AUDIO_NOPRE (03. What You Waiting For (Gwen Stefani).mp3) 2 indices, index0 (0) not provided original disc pos #0 + 16874 (16874) = #16874/3:44.74 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 16874 blocks [SONY DVD RW DRU-800A] -------------------------------------------------------------- 10:30:13 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [SONY DVD RW DRU-800A] for write in raw writing DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 2: 1: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 0 367200 40585392, ISRC "" 2: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 40585392 40585392 81892944, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x01 | 0x00 -150 | 1 | 0 | 0x21 | 0x00 0 | 1 | 1 | 0x21 | 0x00 16429 | 2 | 0 | 0x21 | 0x00 16429 | 2 | 1 | 0x21 | 0x00 33303 | lead-out | 1 | 0x01 | 0x00 10:30:15 #13 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (600 KB/s) 10:30:15 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:30:15 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #16429 10:30:15 #16 Text 0 File Mmc.cpp, Line 16479 StartDAO : CD-Text - On 10:30:15 #17 Text 0 File Mmc.cpp, Line 21241 Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON 10:33:18 #18 Text 0 File WriterStatus.cpp, Line 116 <SONY DVD RW DRU-800A > start writing Lead-Out at LBA 33303 (8217h), lenght 6750 blocks 10:33:41 #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:33:48 #20 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 4x (600 KB/s) 10:33:48 #21 Phase 78 File dlgbrnst.cpp, Line 1832 Data verification started 10:34:12 #22 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 10:34:12 #23 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= Recorder needs eject between burn and verify. Auto reload. (Medium in drive: Unknown. Medium required by compilation: CD-R/RW.) 10:34:12 #24 Text 0 File ThreadedTransferInterface.cpp, Line 1111 Removed 2 run-out blocks from end of track 1. Length: 16429 -> 16427. 10:34:12 #25 Text 0 File ThreadedTransferInterface.cpp, Line 1111 Removed 2 run-out blocks from end of track 2. Length: 16874 -> 16872. 10:34:32 #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:34:47 #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:34:47 #28 Phase 80 File dlgbrnst.cpp, Line 1832 Data verification completed successfully 10:34:48 #29 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 10:34:48 #30 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00 File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 05/11/2002 15:16:52 File 'Drivers\PXHELP20.SYS': Ver=2.02.39a, size=16288 bytes, created 25/09/2002 02:02:00 (Prassi/Veritas driver for win 2K) File 'Drivers\nvatabus.sys': Ver=5.10.2600.0446 built by: WinDDK, size=79360 bytes, created 26/07/2005 10:16:44 (Adapter driver for rec) File 'Drivers\ultra.sys': Ver= 1.43 (Build 0603), size=36736 bytes, created 17/08/2001 12:52:22 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option) log 2 Brian log 5 Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00 ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:32 Nero Version: 6.6.0.8 (Nero Express) Recorder: <SONY DVD RW DRU-800A> Version: KY03 - HA 3 TA 1 - 6.6.0.8 Adapter driver: <atapi> HA 3 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A104 - HA 3 TA 0 - 6.6.0.8 Adapter driver: <atapi> HA 3 === Scsi-Device-Map === DiskPeripheral : Maxtor 6L200P0 atapi Port 0 ID 0 DMA: On DiskPeripheral : SAMSUNG SP1614N atapi Port 0 ID 1 DMA: On DiskPeripheral : SAMSUNG SP1614C atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 3 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DRU-800A atapi Port 3 ID 1 DMA: On CdRomPeripheral : PHILIPS PBDV16LSP1 B1.8 ultra Port 4 ID 0 DMA: Off OtherPeripheral : SI Pseudo Device 0000 Si3114r5 Port 5 ID 16 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4163 D: CDRom0 SONY DVD RW DRU-800A E: CDRom1 PHILIPS PBDV16LSP1 K: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1047856kB) Free physical memory: 664MB (680872kB) Memory in use : 35 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 17.11.2005 Audio CD 10:46:54 #1 CDADOC -1 File Cdadoc.cpp, Line 1465 Audio item log info: Audio document burn settings: ============================= Burn mode: DAO, CD Text: On, Cache disk or network files: No, Cache small files: No, Cache files smaller than 65536 bytes. Audio Multisession: No List of audio tracks: ===================== Track 01: Length: 03:39.04, Pause frames: 150, Filters: 3, Name: '02. Push The Button (Sugababes).mp3'. Track 02: Length: 03:44.74, Pause frames: 000, Filters: 3, Name: '03. What You Waiting For (Gwen Stefani).mp3'. Total size: 07:26.03 10:46:54 #2 Text 0 File Burncd.cpp, Line 2868 SONY DVD RW DRU-800A Power-Burn activated 10:46:54 #3 Text 0 File Reader.cpp, Line 127 Reader running 10:46:54 #4 Text 0 File Writer.cpp, Line 122 Writer SONY DVD RW DRU-800A running 10:46:54 #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 10:46:54 #6 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using CD-R/RW media 10:46:55 #7 Text 0 File DlgWaitCD.cpp, Line 260 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 33302 ( 7:26.02) 10:46:55 #8 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 10:46:55 #9 Text 0 File DlgWaitCD.cpp, Line 2339 Recorder: SONY DVD RW DRU-800A; CDRW code: 00 97 26 65; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D1 00 C6, 2: 61 1A 41 (LI 97:26.65), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 02 4C B0, 2: 4A C8 36, 3: 00 80 80 (invalid) 10:46:55 #10 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:46:55 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_AUDIO_NOPRE (02. Push The Button (Sugababes).mp3) 2 indices, index0 (150) not provided original disc pos #0 + 16429 (16429) = #16429/3:39.4 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 16429 blocks [SONY DVD RW DRU-800A] 1: TRM_AUDIO_NOPRE (03. What You Waiting For (Gwen Stefani).mp3) 2 indices, index0 (0) not provided original disc pos #0 + 16874 (16874) = #16874/3:44.74 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 16874 blocks [SONY DVD RW DRU-800A] -------------------------------------------------------------- 10:46:55 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [SONY DVD RW DRU-800A] for write in raw writing DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 2: 1: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 0 367200 40585392, ISRC "" 2: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 40585392 40585392 81892944, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x01 | 0x00 -150 | 1 | 0 | 0x21 | 0x00 0 | 1 | 1 | 0x21 | 0x00 16429 | 2 | 0 | 0x21 | 0x00 16429 | 2 | 1 | 0x21 | 0x00 33303 | lead-out | 1 | 0x01 | 0x00 10:46:57 #13 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (600 KB/s) 10:46:57 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:46:57 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #16429 10:46:57 #16 Text 0 File Mmc.cpp, Line 16479 StartDAO : CD-Text - On 10:46:57 #17 Text 0 File Mmc.cpp, Line 21241 Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON 10:49:53 #18 Text 0 File WriterStatus.cpp, Line 116 <SONY DVD RW DRU-800A > start writing Lead-Out at LBA 33303 (8217h), lenght 6750 blocks 10:50:16 #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:50:23 #20 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 4x (600 KB/s) 10:50:23 #21 Phase 78 File dlgbrnst.cpp, Line 1832 Data verification started 10:50:48 #22 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 10:50:48 #23 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= Recorder needs eject between burn and verify. Auto reload. (Medium in drive: Unknown. Medium required by compilation: CD-R/RW.) 10:50:48 #24 Text 0 File ThreadedTransferInterface.cpp, Line 1111 Removed 2 run-out blocks from end of track 1. Length: 16429 -> 16427. 10:50:48 #25 Text 0 File ThreadedTransferInterface.cpp, Line 1111 Removed 2 run-out blocks from end of track 2. Length: 16874 -> 16872. 10:51:08 #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:51:23 #27 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:51:23 #28 Phase 80 File dlgbrnst.cpp, Line 1832 Data verification completed successfully 10:51:24 #29 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 10:51:24 #30 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00 File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 05/11/2002 15:16:52 File 'Drivers\PXHELP20.SYS': Ver=2.02.39a, size=16288 bytes, created 25/09/2002 02:02:00 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)
the thing that I cant fix is the atapi being reconized That has to be why i get bad burns. Does anyone know how to fix that
It said on my pc ATAPI installed correctly when i ran the adaptec check, in device manager it said all drives on DMA but the nero log said different said dma off and ATAPI ? i removed the ide nvidia drivers and used the windows ones instead ? what motherboard do you have whats the chipset for it???
mother board is k7s5a chipset PROCESSORS 462 pin Socket A supports the AMD® K7 processors Athlon XP / Athlon / Duron processors CHIPSET SiS 735 System Chipset Super I/O and LPC - ITE8705F System Hardware Monitor: Built-in ITE8705 LAN: MAC integrated in SiS®735 & PHY on board (Optional) AC97 Audio Codec SYSTEM BIOS AMI 2Mb Flash EEPROM Supports Plug and Play 1.0A, AMP 1.2, Multi Boot, DMI Support for ACPI revision 1.0 specification MEMORY 2 DDR DIMM sockets and 2 DIMM sockets support (can not be used simultaneously) Two 184-pin DDR SDRAM (DDR200, DDR266) or Two 168-pin 3.3V SDRAM (PC100, PC133) Maximum: 1.0GB (DDR or SDRAM)is sis735 system chipset
Go here and read about NT-SPTI look at your nero log top line http://unix.freshmeat.net/projects/cdrecord/?branch_id=1139&release_id=166660
does anyone know how to remove the ? from bus type atapi detected. That is the only thing on my nero log that is causing a problem
'fraid all i got is this - - as your burner is internal to the PC, that question mark is saying your ATAPI drivers still aren't loaded correctly, try to fix via this - http://home.comcast.net/~bbmayo/FAQ.htm
not at all, you just need to beat the DMA thing into submission. tell you what, try this way (just be very careful with regedit) -
Do you have anything else. I did what you said. IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 11/16/2005 9:40:01 PM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.0.1.2 Internal Version: 7, 0, 1, 2 (Nero Express) Recorder: <SONY DVD RW DRU-530A> Version: 2.1g - HA 1 TA 0 - 7.0.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 2 - 7.0.1.2 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DRU-530A atapi Port 1 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 1 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 gxc122p Port 2 ID 0 DMA: Off === CDRom-Device-Map === SONY DVD RW DRU-530A D: CDRom0 Generic DVD-ROM E: CDRom2 LITE-ON DVDRW SOHW-1633S F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 190MB (195568kB) Memory in use : 62 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 20.11.2005 CD-ROM (ISO) 4:53:34 PM #1 Text 0 File Isodoc.cpp, Line 6411 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 4:53:34 PM #2 Text 0 File Burncd.cpp, Line 3008 SONY DVD RW DRU-530A Power-Burn activated 4:53:34 PM #3 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 72704KB of Memory 4:53:34 PM #4 Text 0 File Reader.cpp, Line 124 Reader running 4:53:34 PM #5 Text 0 File Writer.cpp, Line 113 Writer D: SONY DVD RW DRU-530A running 4:53:34 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 4:53:34 PM #7 Text 0 File Burncd.cpp, Line 3302 Turn on Track-At-Once, using CD-R/RW media 4:53:34 PM #8 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 335974 ( 74:41.49) Last address to be written: 1487 ( 0:21.62) 4:53:34 PM #9 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD DVD) 4:53:34 PM #10 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: SONY DVD RW DRU-530A 4:53:34 PM #11 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:53:34 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1488 (1488) = #1488/0:19.63 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1486 blocks [D: SONY DVD RW DRU-530A] -------------------------------------------------------------- 4:53:34 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: SONY DVD RW DRU-530A] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 3354624, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1488 | lead-out | 1 | 0x41 | 0x00 4:53:34 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1127 Removed 2 run-out blocks from end of track 1. Length: 1488 -> 1486. 4:53:34 PM #15 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 4:53:34 PM #16 Phase 24 File dlgbrnst.cpp, Line 1725 Caching of files started 4:53:34 PM #17 Text 0 File Burncd.cpp, Line 4132 Cache writing successful. 4:53:34 PM #18 Phase 25 File dlgbrnst.cpp, Line 1725 Caching of files completed 4:53:34 PM #19 Phase 36 File dlgbrnst.cpp, Line 1725 Burn process started at 4x (600 KB/s) 4:53:34 PM #20 SPTI -1065 File SCSIPassThrough.cpp, Line 323 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 Buffer x05202000: Len x4000 4:53:34 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 4:53:34 PM #22 Text 0 File MMC.cpp, Line 21611 Set BUFE: Power-Burn -> ON 4:53:43 PM #23 Text 0 File Cdrdrv.cpp, Line 1197 16:53:43.170 - D: SONY DVD RW DRU-530A : Queue again later 4:53:46 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 4:53:51 PM #25 Text 0 File MMC.cpp, Line 16379 <SONY DVD RW DRU-530A > start Close Session 4:55:21 PM #26 Phase 37 File dlgbrnst.cpp, Line 1725 Burn process completed successfully at 4x (600 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 11/16/2005 9:40:02 PM File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 12:59:41 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Disconnect CdRomPeripheral : Generic DVD-ROM 1.0 gxc122p Port 2 ID 0 DMA: Off and do the atapi kill then reinstall them leave CdRomPeripheral : Generic DVD-ROM 1.0 gxc122p Port 2 ID 0 DMA: Off see if that does it
That one is a virtual drive so I cant disconnect it. I have tried to get rid of it with no success. I went in and uninstalled the device and the drivers and it just wont go away. How can I get rid of it?
Ok killalot was on the right road. I had the virtual drive installed from gamesxcopy and when I uninstalled, it was left over from that. Now with that on there the atapi was unable to reconize what kind of transfer rate being as it was fake. It affected all of the drives since one was not reconized. When I found out how to finally uninstall the virtual drive it was cleared and now the atapi reconizes the proper information.
yay, i see those virtual drives a lot but didn't suggest removing it as i don't see too many cause problems, nice one killalot..
@creaky I got rid of those irritating virtual drives by going to: my computer properties device manager hardware system devices and disabled 'plug and play bios extension'
well i just noticed that info tool which is what I was using through the process now detects it so I was happy. But on the log file still has a ? should I reinstall?
if you can burn disk"s with no problems ild leave it. trouble i had was when i did audio cds they didnt fade out or in and didnt remove the silence at the end even though ild selected it and they skipped now and then worked fine for ages then went Pete Tong still given me trouble now, got the nero log saying atapi installed all drives dma on just installed it on my other partition which has only got windows on it nero log says atapi ? dma off but does audio cds perfect bless it, put all my motherboard nvidia drivers on ide etc thought that was the problem the first time round still says atapi ? dma off but still does audio cd perfect....
