command sequence error

I'm getting an error using nero while burning DVD's my burner worked fine for a week and then I started getting errors.
here is the log of loghistory I'll appreciate any help.. thanx



7:00:26 PM #42 Text 0 File DVDMinusRW.cpp, Line 541
EndTrack 2: Last written address was 12431

7:00:26 PM #43 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 2 (not relocatable, no disc pos, no patch infos, orig at #12448): write at #12448

7:00:26 PM #44 Text 0 File DVDR.cpp, Line 2000
Recording mode: Sequential Recording Mode for Multisession

7:00:26 PM #45 Text 0 File Mmc.cpp, Line 20660
Set BUFE: Super Link -> ON

27:00:26 PM #46 Text 0 File DVDR.cpp, Line 2141
Start write address at LBA 12448
DVD high compatibility mode: No

7:00:26 PM #47 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

7:00:26 PM #48 SCSI -1023 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x21 0xD0 0xA0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00

7:00:26 PM #49 CDR -1023 File ThreadedTransferInterface.cpp, Line 1799
Command sequence error

7:00:26 PM #50 TRANSFER -16 File ThreadedTransferInterface.cpp, Line 1799
Could not perform StartTrack

7:00:26 PM #51 SCSI -1066 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x64 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

7:00:26 PM #52 CDR -1066 File WriterStatus.cpp, Line 245
Invalid field in command

7:00:26 PM #53 TRANSFER -19 File WriterStatus.cpp, Line 245
Could not perform Fixation

7:00:26 PM #54 Text 0 File WriterStatus.cpp, Line 254
falling back to disc fixation

7:00:26 PM #55 SCSI -1066 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x00 0x00 0x00 0xE4 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

7:00:26 PM #56 CDR -1066 File WriterStatus.cpp, Line 245
Invalid field in command

7:00:26 PM #57 TRANSFER -19 File WriterStatus.cpp, Line 245
Could not perform Fixation

7:00:26 PM #58 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

7:00:26 PM #59 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 2x (2,770 KB/s)


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 8/23/2001 5:00:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

 

can anyone please help me?

 

You need to give a little more information, your nero log is not complete, it does not show your drive, settings, or what media you are using.

Is this a new burner? What media are you using?

 

yeah this is a new burner,,,,it worked fine for a week...I assume by media you mean the kind of disks I'm using? (I'm using both -r and rw disks) here is the full log from nero..


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 8/23/2001 5:00:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
singh

1A20-020K-0330-1726-8318-4416

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d
(Nero Express)
Recorder: <DVDRW IDE 16X> Version: A082 - HA 0 TA 1 - 6.6.0.14
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <DVDRW IDE 16X >Version: A082 - HA 0 TA 1 - 6.6.0.14
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6E030L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE 16X atapi Port 0 ID 1 DMA: On

=== CDRom-Device-Map ===
DVDRW IDE 16X D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 63MB (64636kB)
Memory in use : 75
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.7.2005
Burn DVD Image
10:53:37 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

10:53:37 PM #2 Text 0 File Writer.cpp, Line 122
Writer DVDRW IDE 16X running

10:53:37 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as TAO.
MTYP: Mediumtype = DVD-R/RW (0x6)
Image file name: <C:\Documents and Settings\sohan\My Documents\My Pictures\image_original\Image_original.nrg>

10:53:37 PM #4 Text 0 File Burncd.cpp, Line 3230
Turn on Track-At-Once, using DVD-R/RW media

11:22:43 PM #5 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2228607 (495:14.57, 4352MB)

11:22:43 PM #6 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)

11:22:43 PM #7 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: DVDRW IDE 16X, Media type: DVD-RW
Disc Manufacturer: RITEKW - 01
Disc Application Code: 64, Disc Physical Code: 214

11:22:43 PM #8 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc not empty. Insert empty disc.
(Medium in drive: DVD-RW. Medium required by compilation: DVD-R/RW.)
This disc is not empty.
(Medium in drive: DVD-RW. Medium required by compilation: DVD-R/RW.)
Disc was erased successfully.
Accessing disc...
(Medium in drive: DVD-RW. Medium required by compilation: DVD-R/RW.)

11:22:43 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 12288 (12288) = #12288/2:43.63
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 12272 blocks [DVDRW IDE 16X]
1: TRM_DATA_MODE1 (2 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #12288 + 160 (160) = #12448/2:45.73
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 144 blocks [DVDRW IDE 16X]
2: TRM_DATA_MODE1 (3 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #12448 + 2216112 (2216112) = #2228560/495:14.10
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2216096 blocks [DVDRW IDE 16X]
3: TRM_DATA_MODE1 (4 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #2228560 + 32 (32) = #2228592/495:14.42
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 16 blocks [DVDRW IDE 16X]
4: TRM_DATA_MODE1 (5 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #2228592 + 16 (16) = #2228608/495:14.58
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 16 blocks [DVDRW IDE 16X]
--------------------------------------------------------------

11:22:43 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [DVDRW IDE 16X] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 5:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 25165824, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 25165824 25165824 25493504, ISRC ""
3: TRM_DATA_MODE1, 2048/0x00, FilePos 25493504 25493504 4564090880, ISRC ""
4: TRM_DATA_MODE1, 2048/0x00, FilePos 4564090880 4564090880 4564156416, ISRC ""
5: TRM_DATA_MODE1, 2048/0x00, FilePos 4564156416 4564156416 4564189184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
12288 | 2 | 0 | 0x41 | 0x00
12288 | 2 | 1 | 0x41 | 0x00
12448 | 3 | 0 | 0x41 | 0x00
12448 | 3 | 1 | 0x41 | 0x00
2228560 | 4 | 0 | 0x41 | 0x00
2228560 | 4 | 1 | 0x41 | 0x00
2228592 | 5 | 0 | 0x41 | 0x00
2228592 | 5 | 1 | 0x41 | 0x00
2228608 | lead-out | 1 | 0x41 | 0x00

11:22:43 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 16 run-out blocks from end of track 1. Length: 12288 -> 12272.

11:22:43 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 16 run-out blocks from end of track 2. Length: 160 -> 144.

11:22:43 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 16 run-out blocks from end of track 3. Length: 2216112 -> 2216096.

11:22:43 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 16 run-out blocks from end of track 4. Length: 32 -> 16.

11:22:43 PM #15 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

11:22:44 PM #16 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.

11:22:44 PM #17 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

11:22:44 PM #18 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)

11:22:44 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

11:22:44 PM #20 Text 0 File DVDR.cpp, Line 2316
Recording mode: Sequential Recording Mode for Multisession

11:22:44 PM #21 Text 0 File Mmc.cpp, Line 21592
Set BUFE: Super Link -> ON

11:22:44 PM #22 Text 0 File DVDR.cpp, Line 2470
Start write address at LBA 0
DVD high compatibility mode: No

11:22:44 PM #23 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:22:45 PM #24 Text 0 File Cdrdrv.cpp, Line 1288
23:22:45.998 - DVDRW IDE 16X\H0 T1 : Queue again later

11:22:48 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
23:22:48.607 - DVDRW IDE 16X\H0 T1 : Queue again later

11:22:48 PM #26 Text 0 File Cdrdrv.cpp, Line 1288
23:22:48.638 - DVDRW IDE 16X\H0 T1 : Queue again later

11:22:48 PM #27 Text 0 File Cdrdrv.cpp, Line 1288
23:22:48.670 - DVDRW IDE 16X\H0 T1 : Queue again later

11:22:48 PM #28 Text 0 File Cdrdrv.cpp, Line 1288
23:22:48.701 - DVDRW IDE 16X\H0 T1 : Queue again later

11:22:48 PM #29 Text 0 File Cdrdrv.cpp, Line 1288
23:22:48.732 - DVDRW IDE 16X\H0 T1 : Queue again later

11:22:48 PM #30 Text 0 File Cdrdrv.cpp, Line 1288
23:22:48.763 - DVDRW IDE 16X\H0 T1 : Queue again later

11:22:48 PM #31 Text 0 File Cdrdrv.cpp, Line 1288
23:22:48.795 - DVDRW IDE 16X\H0 T1 : Queue again later

11:22:48 PM #32 Text 0 File Cdrdrv.cpp, Line 1288
23:22:48.826 - DVDRW IDE 16X\H0 T1 : Queue again later

11:22:48 PM #33 Text 0 File Cdrdrv.cpp, Line 1288
23:22:48.857 - DVDRW IDE 16X\H0 T1 : Queue again later

11:22:48 PM #34 Text 0 File Cdrdrv.cpp, Line 1288
23:22:48.888 - DVDRW IDE 16X\H0 T1 : Queue again later

11:22:57 PM #35 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:22:59 PM #36 Text 0 File DVDMinusRW.cpp, Line 516
EndTrack 1: Last written address was 12271

11:22:59 PM #37 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #12288): write at #12288

11:22:59 PM #38 Text 0 File DVDR.cpp, Line 2316
Recording mode: Sequential Recording Mode for Multisession

11:22:59 PM #39 Text 0 File Mmc.cpp, Line 21592
Set BUFE: Super Link -> ON

11:22:59 PM #40 Text 0 File DVDR.cpp, Line 2470
Start write address at LBA 12288
DVD high compatibility mode: No

11:22:59 PM #41 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:22:59 PM #42 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:23:02 PM #43 Text 0 File DVDMinusRW.cpp, Line 516
EndTrack 2: Last written address was 12431

11:23:02 PM #44 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 2 (not relocatable, no disc pos, no patch infos, orig at #12448): write at #12448

11:23:02 PM #45 Text 0 File DVDR.cpp, Line 2316
Recording mode: Sequential Recording Mode for Multisession

11:23:02 PM #46 Text 0 File Mmc.cpp, Line 21592
Set BUFE: Super Link -> ON

11:23:02 PM #47 Text 0 File DVDR.cpp, Line 2470
Start write address at LBA 12448
DVD high compatibility mode: No

11:23:02 PM #48 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:23:02 PM #49 SCSI -1023 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x21 0xD0 0xA0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00

11:23:02 PM #50 CDR -1023 File ThreadedTransferInterface.cpp, Line 2050
Command sequence error

11:23:02 PM #51 TRANSFER -16 File ThreadedTransferInterface.cpp, Line 2050
Could not perform StartTrack

11:23:02 PM #52 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x74 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

11:23:02 PM #53 CDR -1066 File WriterStatus.cpp, Line 249
Invalid field in command

11:23:02 PM #54 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation

11:23:02 PM #55 Text 0 File WriterStatus.cpp, Line 258
falling back to disc fixation

11:23:02 PM #56 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x00 0x00 0x00 0xF4 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

11:23:02 PM #57 CDR -1066 File WriterStatus.cpp, Line 249
Invalid field in command

11:23:02 PM #58 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation

11:23:02 PM #59 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)


Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 14, 1, size=99456 bytes, created 4/12/2005 11:07:50 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 14, 1, size=29056 bytes, created 4/12/2005 11:07:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 14, 1, size=8704 bytes, created 4/12/2005 11:07:54 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 8/23/2001 5:00:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

 

bump???

 

Try slowing down your burn speed to 4x and see what happens

 

it does the same thing....

 

when I slow down the burn speed it still errors out....