"invalid field in command": help!

Discussion in 'Nero discussion' started by drstein69, Jul 12, 2005.

Page 1 of 2
  1. drstein69

    drstein69 Member

    Joined:
    Jul 12, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    Hello, I have this problem: without changing anything (software/media) my samsung ts-h552b stopped burning dvds (but not cds!). I tried to change media and writing speed just to be sure, but it didn't work. All I get is this message. Could it be a burner problem? I have the latest version of Nero and of the Firmware.
    Can anybody help me please? This is the log I get:

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Programmi\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18.35.34
    Nero Version: 6.6.0.15
    Internal Version: 6, 6, 0, 15e
    (Nero Express)
    Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS10 - HA 3 TA 1 - 6.6.0.15
    Adapter driver: <atapi> HA 3
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <TSSTcorp DVD-ROM TS-H352A>Version: TS04 - HA 3 TA 0 - 6.6.0.15
    Adapter driver: <atapi> HA 3

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y160M0 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp DVD-ROM TS-H352A atapi Port 3 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 3 ID 1 DMA: On

    === CDRom-Device-Map ===
    TSSTcorp DVD-ROM TS-H352A D: CDRom0
    TSSTcorp CD/DVDW TS-H552B E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 510MB (522988kB)
    Free physical memory: 332MB (340836kB)
    Memory in use : 34 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    12.7.2005
    ISO compilation
    19.54.08 #1 Text 0 File Isodoc.cpp, Line 6314
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    19.54.08 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    19.54.08 #3 Text 0 File Writer.cpp, Line 122
    Writer TSSTcorp CD/DVDW TS-H552B running

    19.54.08 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    19.54.08 #5 Text 0 File Burncd.cpp, Line 3231
    Turn on Disc-At-Once, using DVD media

    19.54.08 #6 Text 0 File DlgWaitCD.cpp, Line 267
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1807567 (401:40.67, 3530MB)

    19.54.08 #7 Text 0 File DlgWaitCD.cpp, Line 279
    Write in overburning mode: NO (enabled: CD)

    19.54.08 #8 Text 0 File DlgWaitCD.cpp, Line 2457
    Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
    Disc Manufacturer: MCC 02 - RG20
    Disc Application Code: 64, Disc Physical Code: 193

    19.54.08 #9 Text 0 File DlgWaitCD.cpp, Line 445
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    19.54.08 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1807568 (1807568) = #1807568/401:40.68
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1807568 blocks [TSSTcorp CD/DVDW TS-H552B]
    --------------------------------------------------------------

    19.54.08 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3701899264, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1807568 | lead-out | 1 | 0x41 | 0x00

    19.54.08 #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    19.54.15 #13 Text 0 File Burncd.cpp, Line 4116
    Cache writing successful.

    19.54.15 #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    19.54.15 #15 Phase 32 File dlgbrnst.cpp, Line 1832
    Simulation started at 8x (11.080 KB/s)

    19.54.15 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    19.54.15 #17 Text 0 File DVDR.cpp, Line 2340
    Recording mode: Sequential Recording Mode for Multisession

    19.54.15 #18 Text 0 File Mmc.cpp, Line 21627
    Set BUFE: Super Link -> ON

    19.54.15 #19 Text 0 File DVDR.cpp, Line 2494
    Start write address at LBA 0
    DVD high compatibility mode: No

    19.54.15 #20 Text 0 File Cdrdrv.cpp, Line 8821
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    19.54.26 #21 Text 0 File Cdrdrv.cpp, Line 1288
    19:54:26.046 - TSSTcorp CD/DVDW TS-H552B\H3 T1 : Queue again later

    20.01.25 #22 Text 0 File WriterStatus.cpp, Line 116
    <TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 1807568 (1B94D0h), lenght 0 blocks

    20.01.25 #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    20.01.26 #24 Text 0 File DVDR.cpp, Line 2732
    EndDAO: Last written address was 1807567

    20.01.32 #25 Phase 133 File dlgbrnst.cpp, Line 1832
    Writing short lead-out

    20.02.04 #26 Phase 33 File dlgbrnst.cpp, Line 1832
    Simulation completed successfully at 8x (11.080 KB/s)

    20.02.05 #27 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 8x (11.080 KB/s)

    20.02.05 #28 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    20.02.05 #29 CDR -1066 File ThreadedTransferInterface.cpp, Line 1733
    Invalid field in command

    20.02.05 #30 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1733
    Invalid track info

    20.02.05 #31 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 8x (11.080 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 12.02.00 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 7.59.42 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    Last edited: Jul 12, 2005
    drstein69, Jul 12, 2005
    #1
  2. bbmayo

    bbmayo Active member

    Joined:
    Oct 31, 2004
    Messages:
    4,257
    Likes Received:
    0
    Trophy Points:
    96
    It could be your drive or media.. Try cleaning the lens with a comercial DVD lens cleaner or sometimes some compressed air will do the trick.

    Try also to write an image of the disk to the Hard drive. that could rule out any of the software... :)
     
    bbmayo, Jul 12, 2005
    #2
  3. drstein69

    drstein69 Member

    Joined:
    Jul 12, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    Thanx I'll try both!
     
    drstein69, Jul 14, 2005
    #3
  4. drstein69

    drstein69 Member

    Joined:
    Jul 12, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    Ok, cleaned the lens but nothing :(
    Next step should be opening the whole box and have a look at the cables.. sigh
     
    drstein69, Jul 15, 2005
    #4
  5. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    hmmm i can't see anything amiss in that logfile...
     
    creaky, Jul 15, 2005
    #5
  6. drstein69

    drstein69 Member

    Joined:
    Jul 12, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    Got nothing until now, updated firmware & nero, cleaned the lenses, controlled the cables and changed media.. damn samsung.. Should I buy a new dvd burner which do you advice me?
     
    drstein69, Jul 22, 2005
    #6
  7. bbmayo

    bbmayo Active member

    Joined:
    Oct 31, 2004
    Messages:
    4,257
    Likes Received:
    0
    Trophy Points:
    96
    So you say it burns CD's with no problems then it just may be the drive is defective. How old is the drive?
     
    bbmayo, Jul 22, 2005
    #7
  8. drstein69

    drstein69 Member

    Joined:
    Jul 12, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    The drive is 7-8 months old (and worked fine until last week). But.. is it possible for it to be defective just in dvd-burning and not cd-burning?
     
    drstein69, Jul 22, 2005
    #8
  9. bbmayo

    bbmayo Active member

    Joined:
    Oct 31, 2004
    Messages:
    4,257
    Likes Received:
    0
    Trophy Points:
    96
    Yep two different lasers.. It should still be under warranty I would take it back and get a new one immediatly :)
     
    bbmayo, Jul 22, 2005
    #9
  10. drstein69

    drstein69 Member

    Joined:
    Jul 12, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    Thanx I didnt know that! Yes, I think the best thing is to take it back :)
     
    drstein69, Jul 23, 2005
    #10
  11. JesusC

    JesusC Guest

    creaky (or anyone with new info) sorry to shake the dust off this thread. I found this thread by googling for the errors.

    I am, currently, working on this error. I'll paste my log file below.

    I was trying to use Nero to burn some video files created by a DVD authoring program I was trying out (using "Burn DVD-Video Files"). The program only creates the files and you have to use another program to burn the files to a disc.

    I was wondering if any more info has come to light on this problem? To try to solve this problem I have updated the burners firmware and Nero (version 6) with no joy.

    I grabbed a copy of TMPGEnc DVD Author (version 1.5.13.44) from a coworker. I just used TMPGEnc to burn to the media in the Nero log file:

    Recorder: SONY DVD RW DRU-530A, Media type: DVD+R
    Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 3

    The burn completed with out errors but I have yet to view the disk in my DVD player. In the past 7 months has it been found that Nero is the problem? I have used 3 out of the 2 50-spindle of disks I bought in Aug. The first two I used DVD Shrink(?) to burn the discs without problems.

    Has anyone accross this error with the new Nero 7?
    Are Maxell discs any good?

    Thanks in advance, JC.

    ====================================================

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 12/20/2003 21:26:59
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 17:35:34
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e

    Recorder: <SONY DVD RW DRU-530A> Version: 2.1g - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <SONY DVD RW DRU-530A >Version: 2.1g - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : IOMEGA ZIP 250 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : SONY DVD RW DRU-530A atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8481B atapi Port 1 ID 1 DMA: Off
    CdRomPeripheral : AXV CD/DVD-ROM 2.1b axvodka Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    SONY DVD RW DRU-530A I: CDRom0
    HL-DT-ST CD-RW GCE-8481B J: CDRom1
    AXV CD/DVD-ROM K: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 510MB (523240kB)
    Free physical memory: 241MB (247612kB)
    Memory in use : 52 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    1.1.2006
    UDF/ISO compilation
    21:04:52 #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    21:04:52 #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    21:04:52 #3 Text 0 File Isodoc.cpp, Line 6359
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    21:04:52 #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    21:04:52 #5 Text 0 File Reader.cpp, Line 127
    Reader running

    21:04:52 #6 Text 0 File Writer.cpp, Line 122
    Writer SONY DVD RW DRU-530A running

    21:04:52 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    21:04:52 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    21:04:52 #9 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    21:04:52 #10 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 1969519 (437:40.19, 3846MB)

    21:04:52 #11 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    21:04:52 #12 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: SONY DVD RW DRU-530A, Media type: DVD+R
    Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 3

    21:04:52 #13 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    21:04:52 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1969520 (1969520) = #1969520/437:40.20
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1969520 blocks [SONY DVD RW DRU-530A]
    --------------------------------------------------------------

    21:04:52 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [SONY DVD RW DRU-530A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4033576960, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1969520 | lead-out | 1 | 0x41 | 0x00

    21:04:52 #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    21:04:53 #17 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    21:04:53 #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    21:04:53 #19 Phase 32 File dlgbrnst.cpp, Line 1832
    Simulation started at 4x (5,540 KB/s)

    21:04:53 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    21:04:53 #21 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: MAXELL..
    Media type ID: 002
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
    23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    21:04:53 #22 Text 0 File DVDPlusRW.cpp, Line 659
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    21:17:09 #23 Text 0 File WriterStatus.cpp, Line 116
    <SONY DVD RW DRU-530A > start writing Lead-Out at LBA 1969520 (1E0D70h), lenght 0 blocks

    21:17:09 #24 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    21:17:37 #25 Phase 33 File dlgbrnst.cpp, Line 1832
    Simulation completed successfully at 4x (5,540 KB/s)

    21:17:38 #26 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    21:17:38 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    21:17:38 #28 CDR -1066 File ThreadedTransferInterface.cpp, Line 1745
    Invalid field in command
    SONY DVD RW DRU-530A\H1 T0

    21:17:38 #29 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1745
    Invalid track info

    21:17:38 #30 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 12/20/2003 21:26:58
    File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02/03/2003 23:00:00
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 03/11/2005 16:28:13 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 08/03/2004 23:59:42 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    JesusC, Jan 2, 2006
    #11
  12. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @JesusC -

    - no worries, and google is indeed an amazing thing :)

    - firmware's up to date - http://sony.storagesupport.com/dvdrw/firmware.htm#530

    - DMA needs to be ON for that CD drive, fix by following this - http://home.comcast.net/~bbmayo/FAQ.htm

    - sufficient total memory but you need to always ensure sufficient free memory by closing down more programs prior to dvd work/burning

    - should be sorted by getting DMA back ON
     
    creaky, Jan 2, 2006
    #12
  13. JesusC

    JesusC Guest

    Creaky I tried your listed suggestions. I know I changed the DMA setings but I went back and double checked the settings and found that the one drive in the previous log where it said that the DMA was off was set to "DMA if available" however the "Current Transfer Mode" was PIO.

    To fix this I "Uninstalled" the Secondary IDE Channel which the drives were attached. Reset the computer and then uninstalled the drives and reset again. Now everything is set to DMA.

    However, still no joy (log below) when using Nero to burn the video files. If that ain't enough when the process barfs it takes a matter of minutes, literly, for nero to register each click to exit. I then reset the computer to make sure everything is back to normal.

    The disk that I, mention in my previous message, burned using TMPGEnc DVD (same media and files) worked in my DVD player. There were a few spots where the picture was pixelated but I found that this was done during the encoding process.

    I'm open to suggestions but it seems that Nero (how, I don't know) does not like these disks. Is that possible? I've read posts on hardware and media not getting along but don't remember it being a problem with a software package. I haven't tried to burn data DVDs yet but I'm wondering if that is going to be any different.

    Thanks, JC

    ===================================

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 12/20/2003 21:26:59
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 17:35:34
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e

    Recorder: <SONY DVD RW DRU-530A> Version: 2.1g - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <SONY DVD RW DRU-530A >Version: 2.1g - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : IOMEGA ZIP 250 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : SONY DVD RW DRU-530A atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8481B atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    SONY DVD RW DRU-530A I: CDRom0
    HL-DT-ST CD-RW GCE-8481B J: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 510MB (523240kB)
    Free physical memory: 142MB (145992kB)
    Memory in use : 72 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    3.1.2006
    UDF/ISO compilation
    09:47:44 #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    09:47:44 #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    09:47:44 #3 Text 0 File Isodoc.cpp, Line 6359
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    09:47:44 #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    09:47:44 #5 Text 0 File Reader.cpp, Line 127
    Reader running

    09:47:44 #6 Text 0 File Writer.cpp, Line 122
    Writer SONY DVD RW DRU-530A running

    09:47:44 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    09:47:44 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    09:47:44 #9 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    09:47:44 #10 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 1969519 (437:40.19, 3846MB)

    09:47:44 #11 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    09:47:44 #12 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: SONY DVD RW DRU-530A, Media type: DVD+R
    Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 3

    09:47:44 #13 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    09:47:44 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1969520 (1969520) = #1969520/437:40.20
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1969520 blocks [SONY DVD RW DRU-530A]
    --------------------------------------------------------------

    09:47:44 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [SONY DVD RW DRU-530A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4033576960, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1969520 | lead-out | 1 | 0x41 | 0x00

    09:47:44 #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    09:47:44 #17 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    09:47:44 #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    09:47:44 #19 Phase 32 File dlgbrnst.cpp, Line 1832
    Simulation started at 4x (5,540 KB/s)

    09:47:44 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    09:47:44 #21 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: MAXELL..
    Media type ID: 002
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
    23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    09:47:44 #22 Text 0 File DVDPlusRW.cpp, Line 659
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    10:00:00 #23 Text 0 File WriterStatus.cpp, Line 116
    <SONY DVD RW DRU-530A > start writing Lead-Out at LBA 1969520 (1E0D70h), lenght 0 blocks

    10:00:00 #24 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    10:00:28 #25 Phase 33 File dlgbrnst.cpp, Line 1832
    Simulation completed successfully at 4x (5,540 KB/s)

    10:00:29 #26 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    10:00:29 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    10:00:29 #28 CDR -1066 File ThreadedTransferInterface.cpp, Line 1745
    Invalid field in command
    SONY DVD RW DRU-530A\H1 T0

    10:00:29 #29 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1745
    Invalid track info

    10:00:29 #30 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 12/20/2003 21:26:58
    File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02/03/2003 23:00:00
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 03/11/2005 16:28:13 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 08/03/2004 23:59:42 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
    JesusC, Jan 3, 2006
    #13
  14. JesusC

    JesusC Guest

    Knock, Knock, Knock... is this thing on :)))

    Creaky, have I reached the bottom of your vast knowledge, or haven't you had time to answer? I understand either way just let me know and I'll try posting on the usenet groups or something. What ever the case may be I appreciate the help.

    JC
     
    JesusC, Jan 5, 2006
    #14
  15. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    sorry, i've got a few replies i hadn't caught up on.

    to me it's now down to one of two things, the burner isn't getting along with those discs, or the burner's not getting along well itself, ie it's failing..

    i not so long back retired my trusty Sony DRU-700A after a couple thousand burns, took me a while to see that it was failing..
     
    creaky, Jan 5, 2006
    #15
  16. kaidomav

    kaidomav Member

    Joined:
    Jul 5, 2006
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    Hello!

    I have the same problem... I tried with Sony and Samsung discs but the problem didnt disappear and more strange that I can burn images with Alcohol. Is this a Nero problem?

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 16/7/2002 22:03:20
    ahead WinASPI: File 'C:\Arquivos de programas\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32

    NT-SPTI used
    Nero Version: 7.0.1.4
    Internal Version: 7, 0, 1, 4

    Recorder: <SONY DVD RW DW-U55A> Version: 2.5b - HA 1 TA 3 - 7.0.1.4
    Adapter driver: <IDE> HA 1
    Drive buffer : 8192kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 5 - 7.0.1.4
    Adapter driver: <SCSI> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : TOSHIBA MK6021GAS atapi Port 0 ID 0 DMA: Off
    CdRomPeripheral : SONY DVD RW DW-U55A atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    SONY DVD RW DW-U55A D: CDRom3
    SCSIVAX DVD/CD-ROM F: CDRom5
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 510MB (523056kB)
    Free physical memory: 92MB (94292kB)
    Memory in use : 81 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    5.7.2006
    UDF compilation
    08:25:23 #1 Text 0 File Isodoc.cpp, Line 6411
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    UDF Mode : pure
    UDF Revision : 1.02
    UDF Partition Type : physical

    08:25:24 #2 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 72704KB of Memory

    08:25:24 #3 Text 0 File Reader.cpp, Line 124
    Reader running

    08:25:24 #4 Text 0 File Writer.cpp, Line 113
    Writer D: SONY DVD RW DW-U55A running

    08:25:25 #5 Text 0 File Burncd.cpp, Line 3342
    Turn on Disc-At-Once, using DVD media

    08:25:25 #6 Text 0 File DlgWaitCD.cpp, Line 279
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2092335 (464:57.60, 4086MB)

    08:25:25 #7 Text 0 File DlgWaitCD.cpp, Line 291
    Write in overburning mode: NO (enabled: CD DVD)

    08:25:25 #8 Text 0 File DlgWaitCD.cpp, Line 2578
    Recorder: SONY DVD RW DW-U55A, Media type: DVD-R
    Disc Manufacturer: OPTODI - SCR008
    Disc Application Code: 64, Disc Physical Code: 193

    08:25:25 #9 Text 0 File DlgWaitCD.cpp, Line 458
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    08:25:25 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2092336 (2092336) = #2092336/464:57.61
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2092336 blocks [D: SONY DVD RW DW-U55A]
    --------------------------------------------------------------

    08:25:25 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [D: SONY DVD RW DW-U55A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4285104128, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2092336 | lead-out | 1 | 0x41 | 0x00

    08:25:25 #12 Text 0 File SCSIPassThrough.cpp, Line 36
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    08:25:25 #13 Phase 24 File dlgbrnst.cpp, Line 1725
    Caching of files started

    08:25:25 #14 Text 0 File Burncd.cpp, Line 4176
    Cache writing successful.

    08:25:25 #15 Phase 25 File dlgbrnst.cpp, Line 1725
    Caching of files completed

    08:25:25 #16 Phase 32 File dlgbrnst.cpp, Line 1725
    Simulation started at 4x (5.540 KB/s)

    08:25:26 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    08:25:26 #18 Text 0 File DVDR.cpp, Line 2580
    Recording mode: Sequential Recording Mode for Multisession

    08:25:26 #19 Text 0 File MMC.cpp, Line 21611
    Set BUFE: Power-Burn -> ON

    08:25:26 #20 Text 0 File DVDR.cpp, Line 2735
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    08:25:26 #21 Text 0 File Cdrdrv.cpp, Line 8411
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 30 00 10 20 40 00 00 - 00 00 00 21 00 00 00 00 .0...@.....!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    09:00:53 #22 Text 0 File WriterStatus.cpp, Line 116
    <D: SONY DVD RW DW-U55A> start writing Lead-Out at LBA 2092336 (1FED30h), length 0 blocks

    09:00:53 #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    09:00:54 #24 Text 0 File DVDR.cpp, Line 2978
    EndDAO: Last written address was 2092335

    09:00:56 #25 Phase 33 File dlgbrnst.cpp, Line 1725
    Simulation completed successfully at 4x (5.540 KB/s)

    09:00:57 #26 Phase 36 File dlgbrnst.cpp, Line 1725
    Burn process started at 4x (5.540 KB/s)

    09:00:58 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    09:00:58 #28 Text 0 File DVDR.cpp, Line 2580
    Recording mode: Sequential Recording Mode for Multisession

    09:00:58 #29 Text 0 File MMC.cpp, Line 21611
    Set BUFE: Power-Burn -> ON

    09:00:58 #30 Text 0 File DVDR.cpp, Line 2735
    Start write address at LBA 2092352
    DVD high compatibility mode: Yes

    09:00:58 #31 Text 0 File Cdrdrv.cpp, Line 8411
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 30 00 10 20 40 00 00 - 00 00 00 21 00 00 00 00 .0...@.....!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    09:00:58 #32 SPTI -1066 File SCSIPassThrough.cpp, Line 323
    D: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x53 00 00 00 00 00 1F ED 30 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24

    09:00:58 #33 CDR -1066 File ThreadedTransferInterface.cpp, Line 1799
    Invalid field in command
    D: SONY DVD RW DW-U55A

    09:00:58 #34 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
    Could not perform start of Disc-at-once

    09:00:58 #35 Phase 38 File dlgbrnst.cpp, Line 1725
    Burn process failed at 4x (5.540 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 16/7/2002 21:05:10
    File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 08:53:04
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 23/8/2029 11:09:10 (Prassi/Veritas driver for win 2K)
    File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 4/8/2004 02:55:42 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    Thanks!
     
    kaidomav, Jul 5, 2006
    #16
  17. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @kaidomav -

    - Nero is a little out of date, however your problem does not look like it's Nero-related

    - burner's firmware is up to date, but as at Nov 2004!, so is quite old now - http://forum.rpc1.org/dl_firmware.php?download_id=1876
    This means the burner's firmware is ill-equipped to recognise newer media

    - DMA needs to be for that Toshiba drive, fix (turn DMA ON) by following this - http://home.comcast.net/~bbmayo/FAQ.htm

    - sufficient total memory however virtually no free memory so your PC will be using virtual memory ie a portion of hard disc; this in conjunction with DMA being OFF will be causing your problems

    - if the above fixes don't resolve your problem then try better media, these Optodisc are not too good

    - see all my comments
     
    Last edited: Jul 5, 2006
    creaky, Jul 5, 2006
    #17
  18. kaidomav

    kaidomav Member

    Joined:
    Jul 5, 2006
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    Thanks for replying!

    I turned On the Toshiba driver, but the problem still persists... how can I resolve the memory problem?

    I tried to update the firmware using the firmware from sony website at this time (the first time, I use the firmware from the link that you show me).
     
    kaidomav, Jul 5, 2006
    #18
  19. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    no worries. just noticed a speeling mistake in previous reply.
    anyway, to free up more memory you just need to close down as many programs as you can prior to starting the burn process. Also don't multitask during the burn ie leave PC alone while burning (just better to be sure of a good burn without any disk activity at same time as burn is trying to burn data from that same hard disc)
     
    Last edited: Jul 5, 2006
    creaky, Jul 5, 2006
    #19
  20. D_Monkata

    D_Monkata Member

    Joined:
    Jan 11, 2007
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    Hi i have this problem with Invalid Field in Command in Nero StartSmart and i so dispirit with this it happent at once...it's just work fine 2 day ago...and stop today.Please help me guys here is my Log from Nero.!Thanks

    D-Monkata

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2002-07-17 08:20:56
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-10-26 18:35:34
    Nero Version: 6.6.0.16
    Internal Version: 6, 6, 0, 16b
    (Nero Express)
    Recorder: < DVD+RW RW8160> Version: 1.03 - HA 1 TA 0 - 6.6.0.16
    Adapter driver: <atapi> HA 1
    Drive buffer : 8192kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <LP7116S RPZ542L >Version: 1.0 - HA 2 TA 0 - 6.6.0.16
    Adapter driver: <dtscsi> HA 2

    === Scsi-Device-Map ===
    DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : DVD+RW RW8160 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LP7116S RPZ542L 1.0 dtscsi Port 2 ID 0 DMA: Off
    CdRomPeripheral : LP7116S RPZ542L 1.0 dtscsi Port 2 ID 1 DMA: Off

    === CDRom-Device-Map ===
    DVD+RW RW8160 E: CDRom0
    LP7116S RPZ542L F: CDRom1
    LP7116S RPZ542L G: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523632kB)
    Free physical memory: 176MB (181216kB)
    Memory in use : 65 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    11.1.2007
    ISO compilation
    13:01:49 #1 Text 0 File Isodoc.cpp, Line 6356
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    13:01:49 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    13:01:49 #3 Text 0 File Writer.cpp, Line 122
    Writer DVD+RW RW8160 running

    13:01:49 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    13:01:49 #5 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    13:01:49 #6 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2132847 (473:57.72, 4165MB)

    13:01:49 #7 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    13:01:49 #8 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: DVD+RW RW8160, Media type: DVD+R

    13:01:49 #9 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    13:01:49 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2132848 (2132848) = #2132848/473:57.73
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2132848 blocks [DVD+RW RW8160]
    --------------------------------------------------------------

    13:01:49 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [DVD+RW RW8160] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4368072704, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2132848 | lead-out | 1 | 0x41 | 0x00

    13:01:49 #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    13:01:50 #13 Text 0 File Burncd.cpp, Line 4120
    Cache writing successful.

    13:01:50 #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    13:01:50 #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 2.4x (3 324 KB/s)

    13:01:50 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    13:01:50 #17 SCSI -1066 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0BB00600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
    0x00 0x00 0x00 0x00 0x24 0x00

    13:01:50 #18 SCSI -1066 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
    0x00 0x00 0x00 0x00 0x24 0x00

    13:01:50 #19 Text 0 File DVDR.cpp, Line 5896
    Drive: DVD+RW RW8160
    Book Type request [gen]: DVD-ROM, write to EEPROM
    Changing the Book Type was finished successfully, return code 0

    13:01:50 #20 CDR -1207 File DVDR.cpp, Line 5065
    Book Type automatically set to: DVD-ROM

    13:01:50 #21 Text 0 File DVDPlusRW.cpp, Line 665
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    13:02:28 #22 SCSI -400 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B570000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x91
    Sense Qual: 0xC2
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0C
    0x00 0x00 0x00 0x00 0x91 0xC2

    13:02:28 #23 CDR -400 File Writer.cpp, Line 311
    Unspecified target error

    13:02:28 #24 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    13:02:29 #25 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    13:02:29 #26 SCSI -1066 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
    0x00 0x00 0x00 0x00 0x24 0x00

    13:02:29 #27 Phase 127 File dlgbrnst.cpp, Line 1832
    Generating DVD high compatibility borders

    13:02:29 #28 SCSI -1066 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
    0x00 0x00 0x00 0x00 0x24 0x00

    13:02:29 #29 Text 0 File DVDR.cpp, Line 5896
    Drive: DVD+RW RW8160
    Book Type request [gen]: DVD-ROM, write to EEPROM
    Changing the Book Type was finished successfully, return code 0

    13:02:29 #30 CDR -1066 File WriterStatus.cpp, Line 167
    Invalid field in command

    13:02:29 #31 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    13:02:29 #32 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 2.4x (3 324 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 2006-05-19 23:16:24
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 2002-07-17 07:53:02
    File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 2006-08-25 05:47:00 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2714 (xpsp.050705-1524), size=95616 bytes, created 2005-07-05 18:45:22 (Adapter driver for rec)
    File 'Drivers\dtscsi.sys': Ver=?.?.?.?, size=223128 bytes, created 2006-05-10 15:26:25 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
    D_Monkata, Jan 11, 2007
    #20
Page 1 of 2

Share This Page