Hi I had this problem a couple of times now i tried to burn some files on a dvd-r with nero the problem is it burns a few % sometimes almost the whole cd and then it just stops it sits there and does nothing i don't get an error message but it won't eject the dvd either if someone knows what's wrong please help.
paste LAST section of Nero log which is in c:\program files\ahead\nero\nerohistory.log, but DO NOT post your serial number which usually begins with '1A21' or similar..
nothing at all but everytime it happens the buffer is at 8% it says action track and recorder state ready the time is still going too just the progress bar and the burner stopped
maybe try this - http://home.comcast.net/~bbmayo/FAQ.htm. after that download dvdinfopro (free from www.dvdinfopro.com) and run one of those discs thru it's media info check, pasting results here
unfortunately that site doesn't work for me The requested page does not exist on this server. The URL you typed or followed is either outdated or inaccurate.
where exactly do i see if it uses dma? this is what i get when i cancel it and let it finish Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 6:06:00 AM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 1:18:04 PM Nero version: 6.3.1.4 (Nero Express) Recorder: <HP DVD Writer 640c> Version: CS30 - HA 0 TA 0 - 6.3.1.4 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorder CD-ROM: <ASUS CD-S480/A5 >Version: 0.99 - HA 0 TA 1 - 6.3.1.4 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === CdRomPeripheral : HP DVD Writer 640c atapi Port 0 ID 0 DMA: On CdRomPeripheral : ASUS CD-S480/A5 atapi Port 0 ID 1 DMA: Off DiskPeripheral : Maxtor 6B200M0 atapi Port 1 ID 0 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off === CDRom-Device-Map === HP DVD Writer 640c D: CDRom0 ASUS CD-S480/A5 E: CDRom1 Generic DVD-ROM J: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 73400320 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 503MB (515376kB) Free physical memory: 178MB (182616kB) Memory in use : 64 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.7.2005 ISO compilation 3:00:07 PM #1 Text 0 File Isodoc.cpp, Line 6038 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 3:00:08 PM #2 Text 0 File Reader.cpp, Line 118 Reader running 3:00:08 PM #3 Text 0 File Writer.cpp, Line 124 Writer HP DVD Writer 640c running 3:00:08 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3898 First writeable address = 0 (0x00000000) 3:00:08 PM #5 Text 0 File Burncd.cpp, Line 3188 Turn on Disc-at-once, using DVD media 3:00:29 PM #6 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2142211 (476:02.61, 4184MB) 3:00:29 PM #7 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 3:00:29 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: HP DVD Writer 640c, Media type: DVD-R Disc Manufacturer: SONY08 - D1 Disc Application Code: 64, Disc Physical Code: 193 3:00:29 PM #9 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Dual Layer.) 3:00:29 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2142212 (2142212) = #2142212/476:2.62 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2142212 blocks [HP DVD Writer 640c ] -------------------------------------------------------------- 3:00:29 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [HP DVD Writer 640c ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4387250176, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2142212 | lead-out | 1 | 0x00 | 0x41 3:00:29 PM #12 Phase 24 File dlgbrnst.cpp, Line 1807 Caching of files started 3:00:30 PM #13 Text 0 File Burncd.cpp, Line 4195 Cache writing successful. 3:00:30 PM #14 Phase 25 File dlgbrnst.cpp, Line 1807 Caching of files completed 3:00:30 PM #15 Phase 36 File dlgbrnst.cpp, Line 1807 Burn process started at 8x (11,040 KB/s) 3:00:30 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2334 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:00:30 PM #17 Text 0 File DVDR.cpp, Line 1597 Recording mode: Sequential Recording Mode for Multisession 3:00:30 PM #18 Text 0 File Mmc.cpp, Line 19872 Set BUFE: supported -> ON 3:00:30 PM #19 Text 0 File DVDR.cpp, Line 1738 Start write address at LBA 0 DVD high compatibility mode: Yes 3:00:30 PM #20 Text 0 File Cdrdrv.cpp, Line 7993 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 3:23:54 PM #21 Phase 40 File dlgbrnst.cpp, Line 1497 Aborted by user 3:23:54 PM #22 Text 0 File DVDR.cpp, Line 1947 EndDAO: Last written address was 1154383 3:23:54 PM #23 Phase 133 File dlgbrnst.cpp, Line 1807 Writing short lead-out 3:27:57 PM #24 Phase 39 File dlgbrnst.cpp, Line 1807 Burn process aborted Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 6:06:00 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:13 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
@yukiko20 - now we're running on gas... - too old, latest is 6.6.0.15 - yup, Nero is tool old to recognise your burner correctly - a-ha - DMA needs to be ON. fix like this - - any reason you're not finalising the disc ?. it needs to be finalised to work properly on other drives - try burning at 4x
i just had to update it since one of the updates actually fixed that dunno why i didn't think about that in the first place >.< thank you for all the help
