I dont know why this started or how to fix it. I looked at other posts but did not find anything that could help me. I did close all running in background. I try to burn a full DVD, I get the failed burn. I burn a small file onto a DVD and it burns fine. Log File: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 4:03:36 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A106 - HA 3 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 3 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <JLMS XJ-HD166S >Version: DGS3 - HA 3 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 3 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 3 ID 0 DMA: On CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4040B D: CDRom0 JLMS XJ-HD166S E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 510MB (522988kB) Free physical memory: 324MB (331816kB) Memory in use : 36 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.8.2005 ISO compilation 4:04:41 PM #1 Text 0 File Isodoc.cpp, Line 6356 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 4:04:41 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 4:04:41 PM #3 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-4040B running 4:04:41 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 4:04:41 PM #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 4:04:41 PM #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2256799 (501:30.49, 4407MB) 4:04:41 PM #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 4:04:42 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD+R Disc Manufacturer ID: MBIPG101, Media Type ID: R04, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 3 4:04:42 PM #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:04:42 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2256800 (2256800) = #2256800/501:30.50 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2256800 blocks [HL-DT-ST DVDRAM GSA-4040B] -------------------------------------------------------------- 4:04:42 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4621926400, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2256800 | lead-out | 1 | 0x41 | 0x00 4:04:42 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 4:04:53 PM #13 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 4:04:53 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 4:04:53 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 4:04:53 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 4:04:53 PM #17 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: MBIPG101 Media type ID: R04 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 4D 42 49 50 47 - 31 30 31 52 30 34 01 38 ...MBIPG101R04.8 23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7..Bn..k...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 4:04:53 PM #18 Text 0 File DVDPlusRW.cpp, Line 665 Start write address at LBA 0 DVD high compatibility mode: Yes 4:19:26 PM #19 Text 0 File WriterStatus.cpp, Line 116 <HL-DT-ST DVDRAM GSA-4040B> start writing Lead-Out at LBA 2256800 (226FA0h), lenght 0 blocks 4:19:26 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 4:19:35 PM #21 SCSI -1194 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 3, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x04 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10 0x35 0x20 0x03 0x0E 0x73 0x04 4:19:35 PM #22 CDR -1194 File ThreadedTransferInterface.cpp, Line 1909 PMA update failure 4:19:35 PM #23 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1909 Could not perform end of Disc-at-once 4:19:38 PM #24 SCSI -1194 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 3, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x04 CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10 0x35 0x23 0x03 0x0E 0x73 0x04 4:19:38 PM #25 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 4:19:39 PM #26 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 4:19:39 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 4:03:36 PM File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 10/24/2002 5:59:48 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This type of error can be caused by out of date firmware, bad/low quality media, out of date program, or failing drive. Your Nero is up to date and you are burning at the corrrect speed. This firmware is out of date and the drive is not showing any support from mfr. because it is an OEM drive. Read these threads on this particular drive and Nero http://forums.afterdawn.com/thread_view.cfm/203955 http://forums.afterdawn.com/thread_view.cfm/1/213121#1180949 There is mixed review on this media, you can try another better brand such as Verbatim, Maxell, TDK or Fuji. http://www.videohelp.com/dvdmedia.p...&hits=25&country=&search=Search+or+List+Media This is what I am seeing in your log, but there will probably be someone else along to see what else can be done.
I started getting this problem, and I finally figured it out..... Try downloading the InCD drivers for nero, and it will probably solve your issue. I haven't had one failed burn since. Once you install it, it should load on it's own each time you turn on your computer. I searched for it with google for the download, but they probably have it on nero's website, too. -Bud
Well I have been working on this. Sorry not to post back sooner to every post. I did try everything posted. It turns out that it was a failing drive. I got a new drive and all works great now. I now have even better speeds with the new drive, from 4x to 16x write. Thanks to all for your help, it did help me to troubleshoot.
