ram help please

Discussion in 'PC hardware help' started by rc82, Aug 7, 2005.

  1. rc82

    rc82 Member

    Joined:
    Mar 28, 2005
    Messages:
    46
    Likes Received:
    0
    Trophy Points:
    16
    i am trying to buy more ram for my completely and horribly stock dell dimension xps t800r. it was a hand-me-down, i have a very low budget and i am just trying to make do until i would eventually like to just build my own (which at that point i will be right back here trying to figure out what is compatable with what).

    i have two sticks right now; one 128 and one 256 both pc100 168pin. i did a little research and i found out that this dell can hold up to 768mb of ram. i believe i need sdram but i have no idea. any help would be much appreciated. thank you.
     
  2. ddp

    ddp Moderator Staff Member

    Joined:
    Oct 15, 2004
    Messages:
    39,197
    Likes Received:
    146
    Trophy Points:
    143
    have you looked inside the computer to see the ram sockets & how many are there as i think 3. what windows are you using & what are you using the computer for? how big is your hd & how much space is left on it?
     
  3. rc82

    rc82 Member

    Joined:
    Mar 28, 2005
    Messages:
    46
    Likes Received:
    0
    Trophy Points:
    16
    hey ddp - thanks for your reply. i think you helped me before when my ram crapped out on me. thank you very much btw, i used an eraser on the one stick and i am still using it. there are 3 sockets. i'm using windows xp pro. i am using the comp for music, movies, tv shows, file conversions, cd and dvd burning, and would also like to start playing a little wc3. my c drive is 29gb with 22 left. i also have an internal 160gb seagate (really i think it is like 140 or 150) and i have 70gb left on that (even more when i clean off some of the crap i'm never going to use)
     
  4. ddp

    ddp Moderator Staff Member

    Joined:
    Oct 15, 2004
    Messages:
    39,197
    Likes Received:
    146
    Trophy Points:
    143
    so you need 2 more 256meg sdram to replace the 128meg to get 768meg. the empty ram socket should have 2 bumps in it. 1 close to center & the 2nd close to 1 end. that means it uses sdram because if 1 bump near the center than is ddr ram. can use either pc100 or pc133 ram which will run as pc100 because of the original pc100 256meg.
     
  5. rc82

    rc82 Member

    Joined:
    Mar 28, 2005
    Messages:
    46
    Likes Received:
    0
    Trophy Points:
    16
    ok thanks. should i go after a good name brand or would generic be the best idea. i'm not really sure on the quality/value difference. i'm looking at pricewatch.com and there are some pretty cheap sticks. just wondering if that would just end up biting me in the a$$.
     
  6. ddp

    ddp Moderator Staff Member

    Joined:
    Oct 15, 2004
    Messages:
    39,197
    Likes Received:
    146
    Trophy Points:
    143
    stay away from infinion ram as had prblems with them as 64 & 128meg version. they were picky on what motherboards they would work with.
     
  7. rc82

    rc82 Member

    Joined:
    Mar 28, 2005
    Messages:
    46
    Likes Received:
    0
    Trophy Points:
    16
    oh and one other question if you don't mind...what the hell is 16Mx8. that is printed on one of the sticks. on pricewatch i noticed that all of the sticks had something similar to this in the description. does this need to match up or no? tia
     
  8. ddp

    ddp Moderator Staff Member

    Joined:
    Oct 15, 2004
    Messages:
    39,197
    Likes Received:
    146
    Trophy Points:
    143
    16mx8=128meg but you want 256meg or 32mx8
     
  9. BigPantz

    BigPantz Regular member

    Joined:
    Jun 11, 2013
    Messages:
    142
    Likes Received:
    0
    Trophy Points:
    26
    Hi, i need some Ram help too..

    I have a standard Compaq S7150UK, 256mb RAM. Ive done a bit of homework & i know i have 2 memory sockets, only 1 is used at the moment & the maximum RAM the motherboard can take is 1GB. Lavalys home edition tells me i have PC2700 DDR RAM, 133mhz. ive looked at getting 2x 512mb RAM sticks but they mostly come in 333mhz. will this work in my PC?

    here are the motherboard specs from the official HP/Compaq site..

    Motherboard information
    Part/Feature
    Specification/Support

    Motherboard Description

    Motherboard manufacturer's name: MS-6577 v3.1
    Pavilion/Compaq name: Neon


    System BIOS supplier
    Phoenix

    Form factor
    µatx 9.6 inches x 9.1 inches

    Processor brand
    Pentium4

    Processor socket type
    478

    Processor family
    Intel Celeron, Pentium 4 HT processor

    Processor front side bus frequency
    400/533 MHz

    Maximum approved processor
    2.80 GHz Celeron processor, 3.06 GHz Pentium 4-HT

    Chipset name
    Intel i845

    Chipset "North Bridge"
    Intel i845GE

    Chipset "South Bridge"
    Intel ICH4

    Memory type
    DDR

    Memory speed
    PC 2700

    Memory sockets
    2 DDR-DIMM

    Maximum Memory
    1.0 GB

    Graphics
    Intel Extreme Graphics with Direct AGP

    Graphics configuration
    Down

    Onboard graphics memory
    Up to 64 MB adjustable in BIOS

    Graphics connector (AGP)
    YES

    TV-Out device
    YES

    Audio
    Integrated AC97 Audio

    Audio Jacks ( Legend below )
    M, LI, LO, Headphone connector

    Ethernet 10/100 LAN supplier
    RealTek RTL8101L

    Ethernet configuration
    integrated, Down

    IE 1394 Front/Back Options
    1F + 1B

    IDE UDMA modes
    2 x UDMA 100/66/33

    Expansion slots (AGP/PCI/Exten)
    One AGP, three PCI

    USB ports
    2F + 4B

    Serial, parallel, floppy, PS2 keyboard and mouse
    1S,1P,1F,PS2 K+M

    Available manufacturing options ( Legend below )
    G,L,E,6

    ..any help appreciated, i need to get more RAM quick. also, if anyone knows where i can get a good deal on memory in the UK please let me know. thanx.

     
  10. ddp

    ddp Moderator Staff Member

    Joined:
    Oct 15, 2004
    Messages:
    39,197
    Likes Received:
    146
    Trophy Points:
    143
    the ram will run at pc2700 but could end up at pc3200(333) depending on your motherboard
     

Share This Page