Originally posted by 360modman:

---

Ok, i believe I may have discussed this earlier, but do what I say from step one right now. Just try it to see if it works.

1. Open DVD Decrypter
2. Next, go to "Tools" --> "Settings"
3. Then go to "ISO write mode"
4. Open a Microsoft worpad on your computer and click "open" once it is loaded --> make sure at the bottom of the opening window it says "all files"
5. Then, open the .dvd file of your Rainbow six game
6. The layer break should be the top line in the file; highlight, right click, and copy that layer break number. --> next, delete that top line where the layer break was and make the image.000 the top line and then save
7. Now, back to DVD Decrypter --> on the right of the "ISO write mod box", enter the layer break code under the "options" tab and then click "ok"
8. Then on DVD Decrypter where it says "please select a file" click on that and then load the .dvd file and then you should be able to insert the DVD into your burner and all set for burning

That's how I burn mine and should work like a charm. Give it a try.

---

Quote:

---

Originally posted by 360modman:

---

Ok, i believe I may have discussed this earlier, but do what I say from step one right now. Just try it to see if it works.

1. Open DVD Decrypter
2. Next, go to "Tools" --> "Settings"
3. Then go to "ISO write mode"
4. Open a Microsoft worpad on your computer and click "open" once it is loaded --> make sure at the bottom of the opening window it says "all files"
5. Then, open the .dvd file of your Rainbow six game
6. The layer break should be the top line in the file; highlight, right click, and copy that layer break number. --> next, delete that top line where the layer break was and make the image.000 the top line and then save
7. Now, back to DVD Decrypter --> on the right of the "ISO write mod box", enter the layer break code under the "options" tab and then click "ok"
8. Then on DVD Decrypter where it says "please select a file" click on that and then load the .dvd file and then you should be able to insert the DVD into your burner and all set for burning

That's how I burn mine and should work like a charm. Give it a try.

---

got to 51% as usual then it just stops at zero burn rate :(

---

Originally posted by SirSmoke:

---

Hey guys, i have a bit of a problem here.

I'm using some rather crappy media because i'm not able to get my hands on Verbs anytime soon. After a few fails i set my writer to X2.4 and it worked fine. I get no errors during burning, everything goes smooth, and it finishes...

And then when i pop it in the 360 it detects it as a movie DVD, and gives me the message "To play this disc, put it in an Xbox 360 console" wtflol?

I used IMGburn, all settings are correct, i've triple-checked everything.
I have a Samsung 360 drive, most forgiving drive there is.
The iso/image is pre-patched.
Though i used some rather crappy DVD's (MCM MAG), even the more expensive ones (RICOH's) didn't work. They burn perfectly fine, but won't run on the box. I get the stupid "put it in an Xbox 360 console".

In the tray-status at dashboard, it says "DVD", so it does read it as a DVD. But it gives me the message that should appear when i try to run a 360 game on a PC.

I'm all out of ideas and options, i only have 5 DL discs left from a friend of mine, and i don't want to waste them invain. Could anyone plz help me out???

---