1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Buffer Level Jumping ... External DVD Writer

Discussion in 'Nero discussion' started by scoober14, Aug 13, 2005.

Thread Status:
Not open for further replies.
Page 1 of 2
  1. scoober14

    scoober14 Member

    Joined:
    Aug 13, 2005
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    16
    Hello everyone, i have an internal AOpen DVD-Rw in a external case that is hooked up to my laptop through the USB port.

    In the last 2 days, my buffer level has been jumping like crazy anywhere from 10% - 90% constantly ... this has drastically reduced the write time of a dvd, and is really starting to annoy me to tell you the truth ... it was fine up until 2 days ago.

    I've read many posts about making the IDE channels DMA and they all are. Now under the IDE controller lab in device manager there is also a Intel (R) 82801DB Ultra ATA Storage Controller -24CB ... now in nero info tools it says this is where my DVD USB drive is connected.

    I don't know if anyone has any ideas but this would help greatly ... i re-installed nero tons of times and also did an okay job of cleaning out registry ... kind of computer dumb as well but i catch on quickly ... thank you
     
    scoober14, Aug 13, 2005
    #1
  2. MilesAhed

    MilesAhed Regular member

    Joined:
    Apr 13, 2005
    Messages:
    395
    Likes Received:
    0
    Trophy Points:
    26
    The buffer jumping has happened to me several times with my internal DVD burner and CD burners on a couple of machines. What I do to fix it is restore the registry back to before the problem started, then I reinstall the last Nero update I put on. You can use a Restore Point if you have one from before the problem started. Trouble with using System Restore Points is it can also do stuff like uninstall software you just installed. So it's annoying to use. What I do is save the registry with ERUNT freeware. It makes a backup of sections of your registry with a small program to restore from those backups. It works great.
    http://www.larshederer.homepage.t-online.de/erunt/

    So every couple of days I make a backup of the registry with ERUNT and
    as they get about 3 weeks old I delete 'em off. Doing a restore from ERUNT and then reinstalling the Nero update I put on last has worked for me to get things back to normal. After you do the Nero update reboot the machine to make sure it loads the new registry entries. It doesn't tell you to reboot but it can make a difference.

     
    MilesAhed, Aug 13, 2005
    #2
  3. scoober14

    scoober14 Member

    Joined:
    Aug 13, 2005
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    16
    Thanks for the help miles ... do you or anyone else know if there's another way around this problem since this kinda sounds tricky. i don't know how to find a restore point also ...
    thank you
     
    scoober14, Aug 13, 2005
    #3
  4. scoober14

    scoober14 Member

    Joined:
    Aug 13, 2005
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    16
    JUST TO UPDATE !!!!!
    it's not only nero that performs this way ... i tried another program and it jumps aswell
     
    scoober14, Aug 13, 2005
    #4
  5. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    going back to Nero for a moment, post LAST section of your Nero log, which is in c:\program files\ahead\nero\nerohistory.log, but DO NOT post your serial number which usually begins with '1A21' or similar
     
    creaky, Aug 13, 2005
    #5
  6. scoober14

    scoober14 Member

    Joined:
    Aug 13, 2005
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    16
    I updated the firmware on my device ... so it works "abit" better now.

    The dvd burn process starts and then the used read buffer empties to around 10% ... slowly but surely it fills up but after it does that the buffer level starts jumping again from 30 - 90%, if the used read buffer didn't empty the buffer level was at 98%.


    Here's the log

    1A23-hjklhjklh-5331

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM
    Nero Version: 6.6.0.16
    Internal Version: 6, 6, 0, 16b

    Recorder: <AOPEN DUW1616/ARR> Version: 101a - HA 2 TA 0 - 6.6.0.16
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <MATSHITA CDRW/DVD UJDA740>Version: 1.03 - HA 0 TA 0 - 6.6.0.16
    Adapter driver: <atapi> HA 0

    === Scsi-Device-Map ===
    CdRomPeripheral : MATSHITA CDRW/DVD UJDA740 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : HITACHI_DK23EA-40 atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    MATSHITA CDRW/DVD UJDA740 D: CDRom0
    AOPEN DUW1616/ARR E: CDRom5
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 510MB (523248kB)
    Free physical memory: 218MB (223632kB)
    Memory in use : 57 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    13.8.2005
    ISO compilation
    9:04:05 PM #1 Text 0 File Isodoc.cpp, Line 6356
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    9:04:07 PM #2 Text 0 File Reader.cpp, Line 127
    Reader running

    9:04:07 PM #3 Text 0 File Writer.cpp, Line 122
    Writer AOPEN DUW1616/ARR running

    9:04:07 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    9:04:07 PM #5 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    9:04:38 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2122895 (471:45.20, 4146MB)

    9:04:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    9:04:38 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: AOPEN DUW1616/ARR, Media type: DVD+R

    9:04:38 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)

    9:04:39 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2122896 (2122896) = #2122896/471:45.21
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2122896 blocks [AOPEN DUW1616/ARR]
    --------------------------------------------------------------

    9:04:39 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [AOPEN DUW1616/ARR] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4347691008, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2122896 | lead-out | 1 | 0x41 | 0x00

    9:04:40 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    9:04:40 PM #13 Text 0 File Burncd.cpp, Line 4120
    Cache writing successful.

    9:04:40 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    9:04:40 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 8x (11,080 KB/s)

    9:04:41 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    9:04:41 PM #17 SCSI -1066 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04C10600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x24 0x00

    9:04:41 PM #18 SCSI -1066 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x24 0x00

    9:04:41 PM #19 Text 0 File DVDR.cpp, Line 5896
    Drive: AOPEN DUW1616/ARR
    Book Type request [gen]: DVD-ROM, write to EEPROM
    Changing the Book Type was finished successfully, return code 0

    9:04:41 PM #20 CDR -1207 File DVDR.cpp, Line 5065
    Book Type automatically set to: DVD-ROM

    9:04:41 PM #21 Text 0 File DVDPlusRW.cpp, Line 665
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:28:46 PM #22 Text 0 File WriterStatus.cpp, Line 116
    <AOPEN DUW1616/ARR > start writing Lead-Out at LBA 2122896 (206490h), lenght 0 blocks

    9:28:46 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    9:30:02 PM #24 SCSI -1066 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x24 0x00

    9:30:02 PM #25 Text 0 File DVDR.cpp, Line 5896
    Drive: AOPEN DUW1616/ARR
    Book Type request [gen]: DVD-ROM, write to EEPROM
    Changing the Book Type was finished successfully, return code 0

    9:30:03 PM #26 Phase 37 File dlgbrnst.cpp, Line 1832
    Burn process completed successfully at 8x (11,080 KB/s)


    Existing drivers:
    File 'Drivers\NeroCD2k.sys': Ver=1.0.0.9, size=44227 bytes, created 11/06/2004 5:03:16 PM
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 3:07:32 PM
    File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 10/11/2004 6:30:18 PM
    File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02/11/2002 10:53:04 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.02.56a, size=17168 bytes, created 01/11/2004 4:02:55 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 1:59:42 AM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
    scoober14, Aug 13, 2005
    #6
  7. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @scoober14 -

    - EDIT OUT your serial number

    - update your burner's firmware - 1.02 is here - http://www.techspot.com/drivers/driver/file/information/5653/AOpen-DUW1616-ARR-Firmware-v-R102

    - yup, update the firmware, the best your burner can tell is that the disc is a +R disc

    - ty burning at 4x

    - try uninstalling Roxio, it doesn't always play well with Nero
     
    creaky, Aug 14, 2005
    #7
  8. scoober14

    scoober14 Member

    Joined:
    Aug 13, 2005
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    16
    k, thanks for all of the help ... i'm gonna try all of those

    weird thing is that i already deleted roxio from add/remove hardware, is it possible it's still hiding somewhere???
     
    scoober14, Aug 14, 2005
    #8
  9. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    creaky, Aug 14, 2005
    #9
  10. scoober14

    scoober14 Member

    Joined:
    Aug 13, 2005
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    16
    roxio zapper doesn't work ... it tells me "the burning engine has been detected and may be used by other roxio product(s), press okay to exit"
     
    scoober14, Aug 15, 2005
    #10
  11. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    k, address the other things and hopefully you should be sorted...
     
    creaky, Aug 15, 2005
    #11
  12. scoober14

    scoober14 Member

    Joined:
    Aug 13, 2005
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    16
    updated the firmware, burned at 4x, uninstalled roxio through add/remove programs and still buffer level jumping like crazy !!!!

    creaky, i appreciate all the help ... at any point if you feel like giving up helpin me that's okay too, but if not thank you
     
    scoober14, Aug 15, 2005
    #12
  13. scoober14

    scoober14 Member

    Joined:
    Aug 13, 2005
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    16
    here's my log file for my latest burn .... i changed the firmware back to where it was b/c it seemed to work abit better but still over 1 1/2 hours for a dvd.

    i aborted half way.

    1A23-************************8
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM
    Nero Version: 6.6.0.16
    Internal Version: 6, 6, 0, 16b

    Recorder: <AOPEN DUW1616/ARR> Version: 101a - HA 2 TA 0 - 6.6.0.16
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <MATSHITA CDRW/DVD UJDA740>Version: 1.03 - HA 0 TA 0 - 6.6.0.16
    Adapter driver: <atapi> HA 0

    === Scsi-Device-Map ===
    CdRomPeripheral : MATSHITA CDRW/DVD UJDA740 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : HITACHI_DK23EA-40 atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    MATSHITA CDRW/DVD UJDA740 D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 510MB (523248kB)
    Free physical memory: 336MB (344780kB)
    Memory in use : 34 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    15.8.2005
    ISO compilation
    2:05:38 PM #1 Text 0 File Isodoc.cpp, Line 6356
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    2:05:38 PM #2 Text 0 File Reader.cpp, Line 127
    Reader running

    2:05:38 PM #3 Text 0 File Writer.cpp, Line 122
    Writer AOPEN DUW1616/ARR running

    2:05:38 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    2:05:38 PM #5 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    2:05:39 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2124047 (472:00.47, 4148MB)

    2:05:39 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    2:05:39 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: AOPEN DUW1616/ARR, Media type: DVD+R

    2:05:39 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    2:05:39 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2124048 (2124048) = #2124048/472:0.48
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2124048 blocks [AOPEN DUW1616/ARR]
    --------------------------------------------------------------

    2:05:39 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [AOPEN DUW1616/ARR] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4350050304, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2124048 | lead-out | 1 | 0x41 | 0x00

    2:05:39 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    2:05:40 PM #13 Text 0 File Burncd.cpp, Line 4120
    Cache writing successful.

    2:05:40 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    2:05:40 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    2:05:40 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    2:05:40 PM #17 SCSI -1066 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04CC0600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x24 0x00

    2:05:40 PM #18 SCSI -1066 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x24 0x00

    2:05:40 PM #19 Text 0 File DVDR.cpp, Line 5896
    Drive: AOPEN DUW1616/ARR
    Book Type request [gen]: DVD-ROM, write to EEPROM
    Changing the Book Type was finished successfully, return code 0

    2:05:40 PM #20 CDR -1207 File DVDR.cpp, Line 5065
    Book Type automatically set to: DVD-ROM

    2:05:40 PM #21 Text 0 File DVDPlusRW.cpp, Line 665
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    2:35:24 PM #22 SCSI -500 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x045B0000
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x08 0x74 0x60 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    2:35:24 PM #23 SCSI -500 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04CC1A00
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x08 0x74 0x60 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    2:35:24 PM #24 Text 0 File Mmc.cpp, Line 19340
    Writer-Buffer for AOPEN DUW1616/ARR\H2 T0 reduced to 32768Bytes

    2:35:24 PM #25 SCSI -500 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03CE6400
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x08 0x74 0x60 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    2:35:24 PM #26 CDR -500 File Writer.cpp, Line 311
    SCSI command aborted
    AOPEN DUW1616/ARR\H2 T0

    2:35:26 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    2:35:30 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    2:35:35 PM #29 SCSI -500 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    2:35:35 PM #30 SCSI -500 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    2:35:36 PM #31 SCSI -500 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03CE6400
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    2:35:36 PM #32 SCSI -500 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04CC1000
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    2:35:36 PM #33 CDR -500 File WriterStatus.cpp, Line 167
    SCSI command aborted
    AOPEN DUW1616/ARR\H2 T0

    2:35:36 PM #34 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    2:35:36 PM #35 SCSI -500 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03CE4A48
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    2:35:37 PM #36 SCSI -500 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03CE4A48
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    2:35:37 PM #37 CDR -500 File WriterStatus.cpp, Line 172
    SCSI command aborted
    AOPEN DUW1616/ARR\H2 T0

    2:35:37 PM #38 TRANSFER -39 File WriterStatus.cpp, Line 172
    Could not perform EndSession

    2:35:39 PM #39 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5,540 KB/s)

    2:35:41 PM #40 SCSI -500 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 3:07:32 PM
    File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02/11/2002 10:53:04 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.02.56a, size=17168 bytes, created 01/11/2004 4:02:55 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 1:59:42 AM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
    scoober14, Aug 15, 2005
    #13
  14. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    you do need update the firmware, as the best your burner can tell is that the disc is a +R disc
     
    creaky, Aug 15, 2005
    #14
  15. scoober14

    scoober14 Member

    Joined:
    Aug 13, 2005
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    16
    k, i'll do that pronto ... now i just tried burning one and i got an error for the first time

    ps ... the disc is + R that i'm using, i don't understand what else it would need to read from it if i updated the firmware


    1A23-0609

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM
    Nero Version: 6.6.0.16
    Internal Version: 6, 6, 0, 16b

    Recorder: <AOPEN DUW1616/ARR> Version: 101a - HA 2 TA 0 - 6.6.0.16
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <MATSHITA CDRW/DVD UJDA740>Version: 1.03 - HA 0 TA 0 - 6.6.0.16
    Adapter driver: <atapi> HA 0

    === Scsi-Device-Map ===
    CdRomPeripheral : MATSHITA CDRW/DVD UJDA740 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : HITACHI_DK23EA-40 atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    MATSHITA CDRW/DVD UJDA740 D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 510MB (523248kB)
    Free physical memory: 336MB (344780kB)
    Memory in use : 34 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    15.8.2005
    ISO compilation
    2:05:38 PM #1 Text 0 File Isodoc.cpp, Line 6356
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    2:05:38 PM #2 Text 0 File Reader.cpp, Line 127
    Reader running

    2:05:38 PM #3 Text 0 File Writer.cpp, Line 122
    Writer AOPEN DUW1616/ARR running

    2:05:38 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    2:05:38 PM #5 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    2:05:39 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2124047 (472:00.47, 4148MB)

    2:05:39 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    2:05:39 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: AOPEN DUW1616/ARR, Media type: DVD+R

    2:05:39 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    2:05:39 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2124048 (2124048) = #2124048/472:0.48
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2124048 blocks [AOPEN DUW1616/ARR]
    --------------------------------------------------------------

    2:05:39 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [AOPEN DUW1616/ARR] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4350050304, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2124048 | lead-out | 1 | 0x41 | 0x00

    2:05:39 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    2:05:40 PM #13 Text 0 File Burncd.cpp, Line 4120
    Cache writing successful.

    2:05:40 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    2:05:40 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    2:05:40 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    2:05:40 PM #17 SCSI -1066 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04CC0600
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x24 0x00

    2:05:40 PM #18 SCSI -1066 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x24 0x00

    2:05:40 PM #19 Text 0 File DVDR.cpp, Line 5896
    Drive: AOPEN DUW1616/ARR
    Book Type request [gen]: DVD-ROM, write to EEPROM
    Changing the Book Type was finished successfully, return code 0

    2:05:40 PM #20 CDR -1207 File DVDR.cpp, Line 5065
    Book Type automatically set to: DVD-ROM

    2:05:40 PM #21 Text 0 File DVDPlusRW.cpp, Line 665
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    2:35:24 PM #22 SCSI -500 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x045B0000
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x08 0x74 0x60 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    2:35:24 PM #23 SCSI -500 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04CC1A00
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x08 0x74 0x60 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    2:35:24 PM #24 Text 0 File Mmc.cpp, Line 19340
    Writer-Buffer for AOPEN DUW1616/ARR\H2 T0 reduced to 32768Bytes

    2:35:24 PM #25 SCSI -500 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03CE6400
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x08 0x74 0x60 0x00 0x00 0x10 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    2:35:24 PM #26 CDR -500 File Writer.cpp, Line 311
    SCSI command aborted
    AOPEN DUW1616/ARR\H2 T0

    2:35:26 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    2:35:30 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    2:35:35 PM #29 SCSI -500 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    2:35:35 PM #30 SCSI -500 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    2:35:36 PM #31 SCSI -500 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03CE6400
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    2:35:36 PM #32 SCSI -500 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04CC1000
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0xFA 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    2:35:36 PM #33 CDR -500 File WriterStatus.cpp, Line 167
    SCSI command aborted
    AOPEN DUW1616/ARR\H2 T0

    2:35:36 PM #34 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    2:35:36 PM #35 SCSI -500 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03CE4A48
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    2:35:37 PM #36 SCSI -500 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03CE4A48
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    2:35:37 PM #37 CDR -500 File WriterStatus.cpp, Line 172
    SCSI command aborted
    AOPEN DUW1616/ARR\H2 T0

    2:35:37 PM #38 TRANSFER -39 File WriterStatus.cpp, Line 172
    Could not perform EndSession

    2:35:39 PM #39 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5,540 KB/s)

    2:35:41 PM #40 SCSI -500 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 2, TA 0, LUN 0
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 3:07:32 PM
    File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02/11/2002 10:53:04 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.02.56a, size=17168 bytes, created 01/11/2004 4:02:55 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 1:59:42 AM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
    scoober14, Aug 15, 2005
    #15
  16. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    yeah, still need to updsate the firmware to version 102..., THEN run a 'simulation burn' thus not wasting a disc (it'll ask for a blank disc and go thru the motions but won't actually write to the disc). post the log entry for that simulation and we'll see what falls out the bottom...
     
    Last edited: Aug 16, 2005
    creaky, Aug 16, 2005
    #16
  17. scoober14

    scoober14 Member

    Joined:
    Aug 13, 2005
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    16
    k, i updated the firmware ... had the wrong version all and all, but turns out it worked better than what is supposed to be there ... i'll do a simulation and post it
     
    scoober14, Aug 17, 2005
    #17
  18. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    cool..
     
    creaky, Aug 17, 2005
    #18
  19. scoober14

    scoober14 Member

    Joined:
    Aug 13, 2005
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    16
    creaky ... it's not letting me run the simulation ... says can't run simulation on disc ... i'm using benq +R 8x ... please don't tell me i have to go and get other ones.
     
    scoober14, Aug 17, 2005
    #19
  20. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    just checked and your burner can write 16x to both - and +R. hmmmmm, dunno what's going on there...
     
    creaky, Aug 17, 2005
    #20
Page 1 of 2
Thread Status:
Not open for further replies.

Share This Page