When I try to write a data CD, I get the "Could not perform EndTrack" error message and this happens a lot! almost every once in a while I AM ABLE to write a CD correctly (sometimes the same CD which had problem previously!). I unistalled the older version and installed the 6.6.0.13 version. I have the windows xp pro and also I have the service pack 2 installed, I don't know if this is something related to O/S or not? I'd appreciate it anybody knows what's going on? Thank you.....
Try putting less on the cd, as sometimes you cut it too close when burning and it cannot complete the end track (lead out).
Thanks for replying. But I still get the same error when I try to write the files as small as 200MB or something....
post LAST section of your Nero log, which is in c:\program files\ahead\nero\nerohistory.log, but DO NOT post your serial number which usually begins with '1A21' or similar..
Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'E:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.13 Internal Version: 6, 6, 0, 13c Recorder: <HL-DT-ST RW/DVD GCC-4243N>Version: A102 - HA 0 TA 0 - 6.6.0.13 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST RW/DVD GCC-4243N>Version: A102 - HA 0 TA 0 - 6.6.0.13 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST RW/DVD GCC-4243N atapi Port 0 ID 0 DMA: On DiskPeripheral : TOSHIBA MK3021GAS atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST RW/DVD GCC-4243N G: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 255MB (261460kB) Free physical memory: 42MB (43440kB) Memory in use : 83 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 16.8.2005 CD-ROM (ISO) 11:35:23 AM #1 Text 0 File Isodoc.cpp, Line 6194 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:35:24 AM #2 Text 0 File Burncd.cpp, Line 2882 HL-DT-ST RW/DVD GCC-4243N Buffer underrun protection activated 11:35:24 AM #3 Text 0 File Reader.cpp, Line 127 Reader running 11:35:24 AM #4 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST RW/DVD GCC-4243N running 11:35:24 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 11:35:24 AM #6 Text 0 File Burncd.cpp, Line 3167 Turn on Track-At-Once, using CD-R/RW media 11:35:25 AM #7 Text 0 File DlgWaitCD.cpp, Line 260 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 113058 ( 25:09.33) 11:35:25 AM #8 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 11:35:25 AM #9 Text 0 File DlgWaitCD.cpp, Line 2339 Recorder: HL-DT-ST RW/DVD GCC-4243N; CDR code: 00 97 24 16; OSJ entry from: SONY Corporation ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 18 10 (LI 97:24.16), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 11:35:25 AM #10 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:35:25 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 113059 (113059) = #113059/25:7.34 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 113057 blocks [HL-DT-ST RW/DVD GCC-4243N] -------------------------------------------------------------- 11:35:25 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [HL-DT-ST RW/DVD GCC-4243N] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 231852032, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 113059 | lead-out | 1 | 0x41 | 0x00 11:35:25 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1111 Removed 2 run-out blocks from end of track 1. Length: 113059 -> 113057. 11:35:27 AM #14 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 11:35:52 AM #15 Text 0 File Burncd.cpp, Line 4051 Cache writing successful. 11:35:52 AM #16 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 11:35:52 AM #17 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 16x (2,400 KB/s) 11:35:52 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:35:52 AM #19 Text 0 File Mmc.cpp, Line 21469 Set BUFE: Buffer underrun protection -> ON 11:38:22 AM #20 SCSI -1135 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03760000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x0D 0x20 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 11:38:22 AM #21 CDR -1135 File Writer.cpp, Line 311 Write error 11:38:22 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:38:23 AM #23 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 11:38:23 AM #24 CDR -201 File WriterStatus.cpp, Line 200 Invalid write state HL-DT-ST RW/DVD GCC-4243N\H0 T0 11:38:23 AM #25 TRANSFER -18 File WriterStatus.cpp, Line 200 Could not perform EndTrack 11:38:24 AM #26 Text 0 File Mmc.cpp, Line 16119 <HL-DT-STRW/DVD GCC-4243N> start Close Session 11:38:26 AM #27 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 16x (2,400 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
@betoche - - the firmware your burner needs depends on which PC/drive you have - version 1.08 - this is for HP machines - http://h18007.www1.hp.com/support/files/hpcpqnk/us/download/22745.html or look down the page for your drive here - http://tdb.rpc1.org/ - Support for multiple OEM derivatives (A103 (DELL), 1.00, 1.01 (Toshiba), 1.02 (Acer) and 1.07 (HP/Compaq)) - Snippet from the readme file from the 2nd option - http://tdb.rpc1.org/ - 256MB is barely sufficiengt for Windows XP, never mind DVD work on top. you'll have to free up lots more memory, especially as you only have 256MB - did you mean to d a multisession disc ? - if sorting out the firmware doesn't work, try better media - see previous comment
That same error comes to me also. First i got "Could not perform end of Disc-at-once" problem but after I updated nero, firmware and aspi, it started to work couple of times. But now i got all the time "Could not perform EndTrack" error. It comes whatever I burn or how much, i don't even run any other programs during the burning. Would be great if someone could help me. Here is the log: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26.10.2004 18:35:34 Nero Version: 6.6.0.15 Internal Version: 6, 6, 0, 15h (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 2 TA 0 - 6.6.0.15 Adapter driver: <atapi> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 2 TA 0 - 6.6.0.15 Adapter driver: <atapi> HA 2 === Scsi-Device-Map === DiskPeripheral : ST340016A atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 2 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4163B E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048052kB) Free physical memory: 636MB (651484kB) Memory in use : 37 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 21.8.2005 CD-ROM (ISO) 12:05:20 #1 Text 0 File Isodoc.cpp, Line 6314 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 12:05:20 #2 Text 0 File Burncd.cpp, Line 2946 HL-DT-ST DVDRAM GSA-4163B Buffer underrun protection activated 12:05:20 #3 Text 0 File Reader.cpp, Line 127 Reader running 12:05:20 #4 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-4163B running 12:05:20 #5 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:05:20 #6 Text 0 File Burncd.cpp, Line 3231 Turn on Track-At-Once, using CD-R/RW media 12:05:21 #7 Text 0 File DlgWaitCD.cpp, Line 269 Last possible write address on media: 359844 ( 79:59.69) Last address to be written: 69912 ( 15:34.12) 12:05:21 #8 Text 0 File DlgWaitCD.cpp, Line 281 Write in overburning mode: NO (enabled: CD) 12:05:21 #9 Text 0 File DlgWaitCD.cpp, Line 2477 Recorder: HL-DT-ST DVDRAM GSA-4163B; CDR code: 00 97 15 17; OSJ entry from: Ritek Co. ATIP Data: Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 12:05:21 #10 Text 0 File DlgWaitCD.cpp, Line 447 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:05:21 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 69913 (69913) = #69913/15:32.13 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 69911 blocks [HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 12:05:21 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 143489024, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 69913 | lead-out | 1 | 0x41 | 0x00 12:05:21 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1111 Removed 2 run-out blocks from end of track 1. Length: 69913 -> 69911. 12:05:21 #14 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 12:05:21 #15 Text 0 File Burncd.cpp, Line 4116 Cache writing successful. 12:05:21 #16 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 12:05:21 #17 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 32x (4 800 KB/s) 12:05:21 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:05:21 #19 Text 0 File Mmc.cpp, Line 21663 Set BUFE: Buffer underrun protection -> ON 12:06:21 #20 SCSI -1093 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0BAB0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x78 0xE0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10 0x3C 0x30 0x00 0x80 0x02 0x00 12:06:21 #21 CDR -1093 File Writer.cpp, Line 311 No seek complete 12:06:21 #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:06:21 #23 SCSI -1093 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10 0x3C 0x30 0x00 0x80 0x02 0x00 12:06:21 #24 CDR -1093 File WriterStatus.cpp, Line 197 No seek complete 12:06:21 #25 TRANSFER -18 File WriterStatus.cpp, Line 197 Could not perform EndTrack 12:06:21 #26 CDR -201 File WriterStatus.cpp, Line 200 Invalid write state HL-DT-ST DVDRAM GSA-4163B\H2 T0 12:06:21 #27 TRANSFER -18 File WriterStatus.cpp, Line 200 Could not perform EndTrack 12:06:21 #28 Text 0 File Mmc.cpp, Line 16311 <HL-DT-STDVDRAM GSA-4163B> start Close Session 12:06:21 #29 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 32x (4 800 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.3.2005 1:28:13 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29.8.2002 11:27:50 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
@Stiiv - - firmware is 2 versions behind, A105 is here - http://forum.rpc1.org/dl_firmware.php?category=4&manufactor=16 - if firmware and lowering speed doesn't help, try different media - see previous comment - try 24x, maybe 16x
Need to do few things. First, you need to stop using cheap CD or change your CD. Secondly, use this expensive tool called "blow air using your mouth" on your Writer lens and your back to writing CDs! Note Before: You have to make sure that your system's drivers have all been updated as well.
Thanks Matexusa. Boy do I feel embarrassed. I've been haveing this error for a while and spent the last three days with Windows help and Nero and what not which led me here. I blew on the lense like Mate said and I am back to burning. Again, Thanks for bringing me back to the basics.
that's good for the moment, but it's a short-term fix. keep the other recommendations in mind for when you have more problems.
I've been getting this same message and I need to copy files between my different computers at work, home, and my network disconnected SAFEcomputer at home. //EDIT: lol here's my log:
