help

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c

Recorder: <SONY DVD RW DRU-510A> Version: 1.1a - HA 2 TA 0 - 6.6.0.13
Adapter driver: <> HA 2
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PHILIPS CDRW/DVD SCB5265>Version: TD15 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HTS548040M9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS CDRW/DVD SCB5265 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
PHILIPS CDRW/DVD SCB5265 E: CDRom0
SONY DVD RW DRU-510A F: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522456kB)
Free physical memory: 150MB (154436kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

18.8.2005
DVD-Copy on the fly
3:27:45 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

3:27:45 PM #2 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-510A running

3:27:45 PM #3 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 1717328 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

3:27:45 PM #4 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 1717328 = 1717328, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

3:27:45 PM #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media

3:27:46 PM #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1717327 (381:37.52, 3354MB)

3:27:46 PM #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

3:27:46 PM #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: SONY DVD RW DRU-510A, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193

3:27:46 PM #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

3:27:46 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1717328 (1717328) = #1717328/381:37.53
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1717328 blocks [SONY DVD RW DRU-510A]
--------------------------------------------------------------

3:27:46 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DRU-510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3517087744, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1717328 | lead-out | 1 | 0x41 | 0x00

3:27:46 PM #12 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)

3:27:47 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

3:27:47 PM #14 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode for Multisession

3:27:47 PM #15 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Power-Burn -> ON

3:27:47 PM #16 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: No

3:27:47 PM #17 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

3:28:48 PM #18 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04260000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x08 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0xFF 0xFD 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x73 0x03

3:28:48 PM #19 CDR -1106 File Writer.cpp, Line 311
Power calibration error

3:28:48 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

3:28:48 PM #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

3:28:51 PM #22 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 2239

3:28:51 PM #23 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out

3:28:51 PM #24 SCSI -1176 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x04

3:28:51 PM #25 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error

3:28:51 PM #26 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

3:28:51 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

Deleted...I`m so stupit

 

@linsk,

Please "don't" double post, it is against the forum rule. Please be patience and someone will be here shortly to help you out. Creaky is one of the most experienced member here at AD.com - he's one of the expert on Nero, he'll be here to sort things out for you in due time. I guess since I'm here already, I'll just point out the things that I see alright.

Your Nero is an outdated version, the latest one is 6.6.0.16

I've already check the "rpc forum" and your dvd writer seems to be updated on its firmware so far.

You really need to free more memory here, the more memory available the better the burning process is. Try to "disable" any unneccessary programs that's running by going to "ctrl+alt+delete" or "msconfig" and disable any unuse programs. NOTE: please be very careful of what you disable though.

Looks like a top media to me, but I can't say it's fake or genuine Taiyo Yuden. What is the id on the inner hub though? Does it says something like "TG001159 or TG00XXXX (XXXX = numbers)" on inner hub when you flip the disc over?

If by chance, can you at least try to back up/burn at 4X?