Hello All, How are you guys doing? Well I hope. I am trying to burn and nero is able to create an iso image, but when it goes to write, I get an error message. I have enclosed the entire error log. I would appreciate any feedback and thanks again. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero version: 6.3.1.17 (Nero Express) Recorder: <DVDRW IDE 16X> Version: A07R - HA 1 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorder CD-ROM: <DVDRW IDE 16X >Version: A07R - HA 1 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD1000BB-00CAA1 atapi Port 0 ID 0 DMA: On CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === DVDRW IDE 16X D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2047MB (2096624kB) Free physical memory: 1659MB (1699524kB) Memory in use : 18 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 19.8.2005 ===== Disc-Copy over image - 1st step : Copy to image ... 6:31:42 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 6:31:42 PM #2 Text 0 File Writer.cpp, Line 124 Writer Image Recorder running 6:31:42 PM #3 Text 0 File DVDCopy.cpp, Line 271 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 516592 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0) 6:31:42 PM #4 Text 0 File DVDCopy.cpp, Line 374 Max -1 tracks of 1 allowed to copy 1: 0 - 516592 = 516592, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 6:31:42 PM #5 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 6:31:43 PM #6 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 2147483646 (477218:35.21, 4194303MB) Last address to be written: 516591 (114:47.66, 1008MB) 6:31:43 PM #7 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 6:31:43 PM #8 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 6:31:43 PM #9 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:31:43 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 516592 (516592) = #516592/114:47.67 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 516592 blocks [ Image Recorder ] -------------------------------------------------------------- 6:31:43 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1058287616, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 516592 | lead-out | 1 | 0x00 | 0x41 6:31:43 PM #12 Phase 120 File dlgbrnst.cpp, Line 1845 Creating the image for burning 6:31:43 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 6:35:45 PM #14 Text 0 File WriterStatus.cpp, Line 115 < Image Recorder > start writing Lead-Out at LBA 516592 (7E1F0h), lenght 0 blocks 6:35:45 PM #15 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 6:35:45 PM #16 Phase 121 File dlgbrnst.cpp, Line 1845 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 6:35:49 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 6:35:49 PM #2 Text 0 File Writer.cpp, Line 124 Writer DVDRW IDE 16X running 6:35:49 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 1058287616 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0) 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=114:47.67 ( 516592) MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\DANNY\My Documents\new folder\TempImage.nrg> 6:35:49 PM #4 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 6:36:24 PM #5 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 516591 (114:47.66, 1008MB) 6:36:24 PM #6 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 6:36:24 PM #7 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: DVDRW IDE 16X, Media type: DVD-R Disc Manufacturer: OPTODI - SCK001 Disc Application Code: 64, Disc Physical Code: 193 6:36:24 PM #8 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.) 6:36:24 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) provided original disc pos #0 + 516592 (516592) = #516592/114:47.67 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 516592 blocks [DVDRW IDE 16X ] -------------------------------------------------------------- 6:36:24 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [DVDRW IDE 16X ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1057980416, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 516592 | lead-out | 1 | 0x00 | 0x41 6:36:24 PM #11 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 4x (5,540 KB/s) 6:36:24 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 6:36:24 PM #13 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 3:31,457 (211457ms) -> OK 6:36:24 PM #14 Text 0 File DVDR.cpp, Line 1876 Recording mode: Sequential Recording Mode for Multisession 6:36:24 PM #15 Text 0 File Mmc.cpp, Line 20394 Set BUFE: Super Link -> ON 6:36:24 PM #16 Text 0 File DVDR.cpp, Line 2017 Start write address at LBA 0 DVD high compatibility mode: No 6:36:24 PM #17 Text 0 File Cdrdrv.cpp, Line 8120 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 6:36:28 PM #18 SCSI -1015 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B480000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x02 6:36:28 PM #19 CDR -1015 File Writer.cpp, Line 304 Calibration area full 6:36:28 PM #20 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 6:36:28 PM #21 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 6:36:28 PM #22 Text 0 File DVDR.cpp, Line 2253 EndDAO: Last written address was -1 6:36:28 PM #23 Phase 133 File dlgbrnst.cpp, Line 1845 Writing short lead-out 6:36:29 PM #24 SCSI -1135 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 6:36:29 PM #25 SCSI -1176 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x72 0x04 6:36:29 PM #26 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 6:36:29 PM #27 CDR -1135 File WriterStatus.cpp, Line 164 Write error DVDRW IDE 16X\H1 T0 6:36:29 PM #28 TRANSFER -24 File WriterStatus.cpp, Line 164 Could not perform end of Disc-at-once 6:36:29 PM #29 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 6:36:29 PM #30 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 4x (5,540 KB/s)
it doesnt like the disks you are using, make sure the firmware is up-to date,if that fails use some better disks as those ones you are using are crap btw,remove you nero serial number from your thread (neat the top)
@djrman - you have another post here - http://forums.afterdawn.com/thread_view.cfm/222903, have gone thru your other posts also to build up a better picture of your problem. Also, you started this thread here - http://forums.afterdawn.com/thread_view.cfm/223764 - you need to follow the suggestions/answer the outstanding questions on your threads for us to get you burning again. I think by opening more threads the problem is just spreading and will become tricky to follow. Have requested this thread be moved to the Nero forum. Pls address your existing threads before opening more as you'll be up and burning much quicker this way.. - too old, latest is 6.6.0.16, plus use Burning Rom instead of the dumbed-down Express version - i see on another thread you said your drive is an i/o magic. these drives are frustrating as we need exact model that you have before being able to point you to new firmware. see here for an example - http://forums.afterdawn.com/thread_view.cfm/1/212999 - yup, Nero's too old. it's only detecting your drive generically. which is ironic as this is one of those 'generic' drives. you need to update Nero. - subpar media. as mentioned in your other threads, use decent media - as previous comment, use decent media
