What is a "Could Not Perform Fixation" error?

artmanb · Aug 29, 2005

Hello;

I have been using Nero Ultra 6.6.0.1 for about one week with a PLEXTOR DVDR PX-716A. Sometimes with I burn a data CD or data DVD everything goes good until the very end then I get a "Could Not Perform Fixation" error and then the burn process fails. When I try to burn a new disc the second time it usually burns OK with no problem.

What does this error message mean and how can I prevent it from happening?

Thanks for your help - have a great week!

creaky · Aug 30, 2005

it can be due to the blank discs, but also could be some settings that need tweaking..

post LAST section of your Nero log, which is in c:\program files\ahead\nero\nerohistory.log, but DO NOT post your serial number which usually begins with '1A21' or similar

artmanb · Aug 30, 2005

Hello Creaky;

Thank you for helping me. You told me to post the last section of the history log. I didn't know for sure where the last section started so I posted the entire document without my serial number. At several points in the log an error is mentioned. You said that sometimes the fixation error is caused by the blank disc or settings that need to be tweaked. I am using very high quality Mitsui CD (50 cents each) and Verbatim DVD ($1.oo each) discs. - do you mean that the blank discs are bad? Also what settings can I look at tweaking?

Thanks again for your help!

Bill Artman
Bill Artman Photography, Inc.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <PLEXTOR DVDR PX-716A> Version: 1.08 - HA 3 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 3
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Version: DGS3 - HA 3 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 3 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 1 DMA: On

=== CDRom-Device-Map ===
PLEXTOR DVDR PX-716A E: CDRom0
JLMS XJ-HD166S F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095852kB)
Free physical memory: 1585MB (1623100kB)
Memory in use : 22
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.8.2005
CD-ROM (ISO)
10:43:48 PM #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:43:48 PM #2 Text 0 File Burncd.cpp, Line 2948
PLEXTOR DVDR PX-716A
BURN-Proof activated

10:43:48 PM #3 Text 0 File Reader.cpp, Line 127
Reader running

10:43:48 PM #4 Text 0 File Writer.cpp, Line 122
Writer PLEXTOR DVDR PX-716A running

10:43:48 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

10:43:48 PM #6 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using CD-R/RW media

10:43:48 PM #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 59907 ( 13:20.57)

10:43:48 PM #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

10:43:48 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PLEXTOR DVDR PX-716A;
CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc.
ATIP Data:
Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

10:43:48 PM #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:43:48 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 59908 (59908) = #59908/13:18.58
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 59906 blocks [PLEXTOR DVDR PX-716A]
--------------------------------------------------------------

10:43:49 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PLEXTOR DVDR PX-716A] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 122998784, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
59908 | lead-out | 1 | 0x41 | 0x00

10:43:49 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 59908 -> 59906.

10:43:49 PM #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

10:43:49 PM #15 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

10:43:49 PM #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

10:43:49 PM #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 48x (7,200 KB/s)

10:43:49 PM #18 SCSI -1189 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x036D6000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x02

10:43:49 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:43:49 PM #20 Text 0 File Mmc.cpp, Line 21708
Set BUFE: BURN-Proof -> ON

10:43:52 PM #21 Text 0 File Cdrdrv.cpp, Line 1286
22:43:52.640 - PLEXTOR DVDR PX-716A\H3 T0 : Queue again later

10:44:35 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:44:39 PM #23 Text 0 File Mmc.cpp, Line 16352
<PLEXTOR DVDR PX-716A > start Close Session

10:44:58 PM #24 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 48x (7,200 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 10:16:48 AM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 10/24/2002 3:59:48 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Bill Artman
Bill Artman Photography, Inc.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <PLEXTOR DVDR PX-716A> Version: 1.08 - HA 3 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 3
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Version: DGS3 - HA 3 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 3 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 1 DMA: On

=== CDRom-Device-Map ===
PLEXTOR DVDR PX-716A E: CDRom0
JLMS XJ-HD166S F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095852kB)
Free physical memory: 1581MB (1619748kB)
Memory in use : 22
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.8.2005
UDF/ISO compilation
10:47:42 PM #1 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:47:42 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

10:47:42 PM #3 Text 0 File Writer.cpp, Line 122
Writer PLEXTOR DVDR PX-716A running

10:47:42 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

10:47:42 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

10:47:43 PM #6 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

10:47:43 PM #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 915311 (203:24.11, 1787MB)

10:47:43 PM #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

10:47:43 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PLEXTOR DVDR PX-716A, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193

10:47:43 PM #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:47:43 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 58432 (58432) = #58432/12:59.7
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 58432 blocks [PLEXTOR DVDR PX-716A]
--------------------------------------------------------------

10:47:43 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 2 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 119668736, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
856880 | lead-in | 0 | 0x41 | 0x00
856880 | 2 | 0 | 0x41 | 0x00
856880 | 2 | 1 | 0x41 | 0x00
915312 | lead-out | 1 | 0x41 | 0x00

10:47:44 PM #13 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

10:47:44 PM #14 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

10:47:44 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

10:47:44 PM #16 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

10:47:44 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #856880

10:47:44 PM #18 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession

10:47:44 PM #19 Text 0 File Mmc.cpp, Line 21708
Set BUFE: BURN-Proof -> ON

10:47:44 PM #20 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 856880
DVD high compatibility mode: Yes

10:47:44 PM #21 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: F7F1F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: F7F30 h
Start sector number of the next Border-In: 1012D0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 0F 7F 30 00 10 12 D0 - 00 00 00 00 00 00 00 00 ...0............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:47:47 PM #22 Text 0 File Cdrdrv.cpp, Line 1286
22:47:47.578 - PLEXTOR DVDR PX-716A\H3 T0 : Queue again later

10:48:26 PM #23 Text 0 File WriterStatus.cpp, Line 116
<PLEXTOR DVDR PX-716A > start writing Lead-Out at LBA 915312 (DF770h), lenght 0 blocks

10:48:27 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:48:27 PM #25 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 915311

10:48:33 PM #26 Phase 181 File dlgbrnst.cpp, Line 1832
Writing lead-out...

10:49:01 PM #27 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 10:16:48 AM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 10/24/2002 3:59:48 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Bill Artman
Bill Artman Photography, Inc.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <PLEXTOR DVDR PX-716A> Version: 1.08 - HA 3 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 3
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Version: DGS3 - HA 3 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 3 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 1 DMA: On

=== CDRom-Device-Map ===
PLEXTOR DVDR PX-716A E: CDRom0
JLMS XJ-HD166S F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095852kB)
Free physical memory: 1580MB (1618488kB)
Memory in use : 22
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.8.2005
UDF/ISO compilation
10:51:17 PM #1 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:51:17 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

10:51:17 PM #3 Text 0 File Writer.cpp, Line 122
Writer PLEXTOR DVDR PX-716A running

10:51:17 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

10:51:17 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

10:51:17 PM #6 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

10:51:18 PM #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 650159 (144:28.59, 1269MB)

10:51:18 PM #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

10:51:18 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PLEXTOR DVDR PX-716A, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193

10:51:18 PM #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:51:18 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 91760 (91760) = #91760/20:23.35
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 91760 blocks [PLEXTOR DVDR PX-716A]
--------------------------------------------------------------

10:51:18 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 2 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 187924480, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
558400 | lead-in | 0 | 0x41 | 0x00
558400 | 2 | 0 | 0x41 | 0x00
558400 | 2 | 1 | 0x41 | 0x00
650160 | lead-out | 1 | 0x41 | 0x00

10:51:18 PM #13 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

10:51:19 PM #14 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

10:51:19 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

10:51:19 PM #16 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

10:51:19 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #558400

10:51:19 PM #18 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession

10:51:19 PM #19 Text 0 File Mmc.cpp, Line 21708
Set BUFE: BURN-Proof -> ON

10:51:19 PM #20 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 558400
DVD high compatibility mode: Yes

10:51:19 PM #21 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: B152F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: B1540 h
Start sector number of the next Border-In: B84E0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 0B 15 40 00 0B 84 E0 - 00 00 00 00 00 00 00 00 ...@............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:51:21 PM #22 Text 0 File Cdrdrv.cpp, Line 1286
22:51:21.968 - PLEXTOR DVDR PX-716A\H3 T0 : Queue again later

10:52:16 PM #23 Text 0 File WriterStatus.cpp, Line 116
<PLEXTOR DVDR PX-716A > start writing Lead-Out at LBA 650160 (9EBB0h), lenght 0 blocks

10:52:16 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:52:16 PM #25 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 650159

10:52:22 PM #26 Phase 181 File dlgbrnst.cpp, Line 1832
Writing lead-out...

10:52:51 PM #27 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 10:16:48 AM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 10/24/2002 3:59:48 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Bill Artman
Bill Artman Photography, Inc.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <PLEXTOR DVDR PX-716A> Version: 1.08 - HA 3 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 3
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Version: DGS3 - HA 3 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 3 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 1 DMA: On

=== CDRom-Device-Map ===
PLEXTOR DVDR PX-716A E: CDRom0
JLMS XJ-HD166S F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095852kB)
Free physical memory: 1580MB (1618584kB)
Memory in use : 22
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.8.2005
UDF/ISO compilation
10:55:06 PM #1 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:55:06 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

10:55:06 PM #3 Text 0 File Writer.cpp, Line 122
Writer PLEXTOR DVDR PX-716A running

10:55:06 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

10:55:06 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

10:55:06 PM #6 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

10:55:07 PM #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1196431 (265:52.31, 2336MB)

10:55:07 PM #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

10:55:07 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PLEXTOR DVDR PX-716A, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193

10:55:07 PM #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:55:07 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 296160 (296160) = #296160/65:48.60
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 296160 blocks [PLEXTOR DVDR PX-716A]
--------------------------------------------------------------

10:55:07 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 2 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 606535680, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
900272 | lead-in | 0 | 0x41 | 0x00
900272 | 2 | 0 | 0x41 | 0x00
900272 | 2 | 1 | 0x41 | 0x00
1196432 | lead-out | 1 | 0x41 | 0x00

10:55:07 PM #13 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

10:55:07 PM #14 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

10:55:07 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

10:55:07 PM #16 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

10:55:07 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #900272

10:55:07 PM #18 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession

10:55:07 PM #19 Text 0 File Mmc.cpp, Line 21708
Set BUFE: BURN-Proof -> ON

10:55:07 PM #20 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 900272
DVD high compatibility mode: Yes

10:55:07 PM #21 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 10289F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 1028B0 h
Start sector number of the next Border-In: 10BC50 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 10 28 B0 00 10 BC 50 - 00 00 00 00 00 00 00 00 ..(....P........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:55:11 PM #22 Text 0 File Cdrdrv.cpp, Line 1286
22:55:11.500 - PLEXTOR DVDR PX-716A\H3 T0 : Queue again later

10:56:38 PM #23 Text 0 File WriterStatus.cpp, Line 116
<PLEXTOR DVDR PX-716A > start writing Lead-Out at LBA 1196432 (124190h), lenght 0 blocks

10:56:38 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:56:39 PM #25 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 1196431

10:56:45 PM #26 Phase 181 File dlgbrnst.cpp, Line 1832
Writing lead-out...

10:57:13 PM #27 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 10:16:48 AM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 10/24/2002 3:59:48 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Bill Artman
Bill Artman Photography, Inc.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <PLEXTOR DVDR PX-716A> Version: 1.08 - HA 3 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 3
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Version: DGS3 - HA 3 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 3 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 1 DMA: On

=== CDRom-Device-Map ===
PLEXTOR DVDR PX-716A E: CDRom0
JLMS XJ-HD166S F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095852kB)
Free physical memory: 1579MB (1617304kB)
Memory in use : 22
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.8.2005
UDF/ISO compilation
10:59:47 PM #1 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:59:47 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

10:59:47 PM #3 Text 0 File Writer.cpp, Line 122
Writer PLEXTOR DVDR PX-716A running

10:59:47 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

10:59:47 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

10:59:47 PM #6 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

10:59:48 PM #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 684895 (152:11.70, 1337MB)

10:59:48 PM #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

10:59:48 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PLEXTOR DVDR PX-716A, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193

10:59:48 PM #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:59:48 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 103552 (103552) = #103552/23:0.52
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 103552 blocks [PLEXTOR DVDR PX-716A]
--------------------------------------------------------------

10:59:48 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 2 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 212074496, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
581344 | lead-in | 0 | 0x41 | 0x00
581344 | 2 | 0 | 0x41 | 0x00
581344 | 2 | 1 | 0x41 | 0x00
684896 | lead-out | 1 | 0x41 | 0x00

10:59:48 PM #13 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

10:59:48 PM #14 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

10:59:48 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

10:59:48 PM #16 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

10:59:48 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #581344

10:59:48 PM #18 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession

10:59:48 PM #19 Text 0 File Mmc.cpp, Line 21708
Set BUFE: BURN-Proof -> ON

10:59:48 PM #20 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 581344
DVD high compatibility mode: Yes

10:59:48 PM #21 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: B4ACF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: B4AE0 h
Start sector number of the next Border-In: BDE80 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 0B 4A E0 00 0B DE 80 - 00 00 00 00 00 00 00 00 ..J.............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:59:51 PM #22 Text 0 File Cdrdrv.cpp, Line 1286
22:59:51.156 - PLEXTOR DVDR PX-716A\H3 T0 : Queue again later

11:00:42 PM #23 Text 0 File WriterStatus.cpp, Line 116
<PLEXTOR DVDR PX-716A > start writing Lead-Out at LBA 684896 (A7360h), lenght 0 blocks

11:00:42 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:00:42 PM #25 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 684895

11:00:48 PM #26 Phase 181 File dlgbrnst.cpp, Line 1832
Writing lead-out...

11:01:14 PM #27 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 10:16:48 AM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 10/24/2002 3:59:48 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Bill Artman
Bill Artman Photography, Inc.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <PLEXTOR DVDR PX-716A> Version: 1.08 - HA 3 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 3
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Version: DGS3 - HA 3 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 3 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 1 DMA: On

=== CDRom-Device-Map ===
PLEXTOR DVDR PX-716A E: CDRom0
JLMS XJ-HD166S F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095852kB)
Free physical memory: 1579MB (1617624kB)
Memory in use : 22
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.8.2005
UDF/ISO compilation
11:03:46 PM #1 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:03:46 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

11:03:46 PM #3 Text 0 File Writer.cpp, Line 122
Writer PLEXTOR DVDR PX-716A running

11:03:46 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11:03:46 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11:03:46 PM #6 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

11:03:47 PM #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 588719 (130:49.44, 1149MB)

11:03:47 PM #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

11:03:47 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PLEXTOR DVDR PX-716A, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193

11:03:47 PM #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:03:47 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 122272 (122272) = #122272/27:10.22
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 122272 blocks [PLEXTOR DVDR PX-716A]
--------------------------------------------------------------

11:03:47 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 2 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 250413056, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
466448 | lead-in | 0 | 0x41 | 0x00
466448 | 2 | 0 | 0x41 | 0x00
466448 | 2 | 1 | 0x41 | 0x00
588720 | lead-out | 1 | 0x41 | 0x00

11:03:47 PM #13 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

11:03:47 PM #14 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

11:03:47 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

11:03:47 PM #16 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

11:03:47 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #466448

11:03:47 PM #18 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession

11:03:47 PM #19 Text 0 File Mmc.cpp, Line 21708
Set BUFE: BURN-Proof -> ON

11:03:47 PM #20 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 466448
DVD high compatibility mode: Yes

11:03:47 PM #21 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 9ADFF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 9AE10 h
Start sector number of the next Border-In: A1DB0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 09 AE 10 00 0A 1D B0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:03:49 PM #22 Text 0 File Cdrdrv.cpp, Line 1286
23:03:49.765 - PLEXTOR DVDR PX-716A\H3 T0 : Queue again later

11:04:39 PM #23 Text 0 File WriterStatus.cpp, Line 116
<PLEXTOR DVDR PX-716A > start writing Lead-Out at LBA 588720 (8FBB0h), lenght 0 blocks

11:04:39 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:04:39 PM #25 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 588719

11:04:45 PM #26 Phase 181 File dlgbrnst.cpp, Line 1832
Writing lead-out...

11:05:12 PM #27 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 10:16:48 AM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 10/24/2002 3:59:48 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Bill Artman
Bill Artman Photography, Inc.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <PLEXTOR DVDR PX-716A> Version: 1.08 - HA 3 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 3
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Version: DGS3 - HA 3 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 3 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 1 DMA: On

=== CDRom-Device-Map ===
PLEXTOR DVDR PX-716A E: CDRom0
JLMS XJ-HD166S F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095852kB)
Free physical memory: 1580MB (1618040kB)
Memory in use : 22
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.8.2005
UDF/ISO compilation
11:07:21 PM #1 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:07:21 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

11:07:21 PM #3 Text 0 File Writer.cpp, Line 122
Writer PLEXTOR DVDR PX-716A running

11:07:21 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11:07:21 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11:07:21 PM #6 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

11:07:22 PM #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 576495 (128:06.45, 1125MB)

11:07:22 PM #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

11:07:22 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PLEXTOR DVDR PX-716A, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193

11:07:22 PM #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:07:22 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 86896 (86896) = #86896/19:18.46
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 86896 blocks [PLEXTOR DVDR PX-716A]
--------------------------------------------------------------

11:07:22 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 2 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 177963008, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
489600 | lead-in | 0 | 0x41 | 0x00
489600 | 2 | 0 | 0x41 | 0x00
489600 | 2 | 1 | 0x41 | 0x00
576496 | lead-out | 1 | 0x41 | 0x00

11:07:23 PM #13 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

11:07:23 PM #14 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

11:07:23 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

11:07:23 PM #16 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

11:07:23 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #489600

11:07:23 PM #18 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession

11:07:23 PM #19 Text 0 File Mmc.cpp, Line 21708
Set BUFE: BURN-Proof -> ON

11:07:23 PM #20 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 489600
DVD high compatibility mode: Yes

11:07:23 PM #21 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: A086F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: A0880 h
Start sector number of the next Border-In: A7820 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 0A 08 80 00 0A 78 20 - 00 00 00 00 00 00 00 00 ......x.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:07:25 PM #22 Text 0 File Cdrdrv.cpp, Line 1286
23:07:25.515 - PLEXTOR DVDR PX-716A\H3 T0 : Queue again later

11:08:09 PM #23 Text 0 File WriterStatus.cpp, Line 116
<PLEXTOR DVDR PX-716A > start writing Lead-Out at LBA 576496 (8CBF0h), lenght 0 blocks

11:08:09 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:08:09 PM #25 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 576495

11:08:15 PM #26 Phase 181 File dlgbrnst.cpp, Line 1832
Writing lead-out...

11:08:42 PM #27 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 10:16:48 AM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 10/24/2002 3:59:48 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Bill Artman
Bill Artman Photography, Inc.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <PLEXTOR DVDR PX-716A> Version: 1.08 - HA 3 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 3
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Version: DGS3 - HA 3 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 3 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 1 DMA: On

=== CDRom-Device-Map ===
PLEXTOR DVDR PX-716A E: CDRom0
JLMS XJ-HD166S F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095852kB)
Free physical memory: 1580MB (1618044kB)
Memory in use : 22
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.8.2005
UDF/ISO compilation
11:11:38 PM #1 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:11:38 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

11:11:38 PM #3 Text 0 File Writer.cpp, Line 122
Writer PLEXTOR DVDR PX-716A running

11:11:38 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11:11:39 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11:11:39 PM #6 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

11:11:39 PM #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 861007 (191:20.07, 1681MB)

11:11:39 PM #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

11:11:39 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PLEXTOR DVDR PX-716A, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193

11:11:39 PM #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:11:39 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 106848 (106848) = #106848/23:44.48
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 106848 blocks [PLEXTOR DVDR PX-716A]
--------------------------------------------------------------

11:11:39 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 2 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 218824704, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
754160 | lead-in | 0 | 0x41 | 0x00
754160 | 2 | 0 | 0x41 | 0x00
754160 | 2 | 1 | 0x41 | 0x00
861008 | lead-out | 1 | 0x41 | 0x00

11:11:41 PM #13 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

11:11:41 PM #14 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

11:11:41 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

11:11:41 PM #16 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

11:11:41 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #754160

11:11:41 PM #18 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession

11:11:41 PM #19 Text 0 File Mmc.cpp, Line 21708
Set BUFE: BURN-Proof -> ON

11:11:41 PM #20 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 754160
DVD high compatibility mode: Yes

11:11:41 PM #21 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: DEDDF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: DEDF0 h
Start sector number of the next Border-In: E8190 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 0D ED F0 00 0E 81 90 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:11:43 PM #22 Text 0 File Cdrdrv.cpp, Line 1286
23:11:43.984 - PLEXTOR DVDR PX-716A\H3 T0 : Queue again later

11:12:37 PM #23 Text 0 File WriterStatus.cpp, Line 116
<PLEXTOR DVDR PX-716A > start writing Lead-Out at LBA 861008 (D2350h), lenght 0 blocks

11:12:37 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:12:37 PM #25 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 861007

11:12:43 PM #26 Phase 181 File dlgbrnst.cpp, Line 1832
Writing lead-out...

11:13:11 PM #27 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 10:16:48 AM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 10/24/2002 3:59:48 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Bill Artman
Bill Artman Photography, Inc.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <PLEXTOR DVDR PX-716A> Version: 1.08 - HA 3 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 3
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Version: DGS3 - HA 3 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 3 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 1 DMA: On

=== CDRom-Device-Map ===
PLEXTOR DVDR PX-716A E: CDRom0
JLMS XJ-HD166S F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095852kB)
Free physical memory: 1546MB (1583404kB)
Memory in use : 24
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

28.8.2005
CD-ROM (ISO)
8:11:56 AM #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

8:11:56 AM #2 Text 0 File Burncd.cpp, Line 2948
PLEXTOR DVDR PX-716A
BURN-Proof activated

8:11:56 AM #3 Text 0 File Reader.cpp, Line 127
Reader running

8:11:56 AM #4 Text 0 File Writer.cpp, Line 122
Writer PLEXTOR DVDR PX-716A running

8:11:56 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

8:11:56 AM #6 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using CD-R/RW media

8:11:56 AM #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 228418 ( 50:47.43)

8:11:56 AM #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

8:11:56 AM #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PLEXTOR DVDR PX-716A;
CDR code: 00 97 27 58; OSJ entry from: Mitsui Chemicals, Inc.
ATIP Data:
Special Info [hex] 1: C0 00 B0, 2: 61 1B 3A (LI 97:27.58), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

8:11:56 AM #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

8:11:56 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 228419 (228419) = #228419/50:45.44
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 228417 blocks [PLEXTOR DVDR PX-716A]
--------------------------------------------------------------

8:11:56 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PLEXTOR DVDR PX-716A] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 468109312, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
228419 | lead-out | 1 | 0x41 | 0x00

8:11:56 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 228419 -> 228417.

8:11:56 AM #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

8:11:56 AM #15 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

8:11:56 AM #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

8:11:56 AM #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 48x (7,200 KB/s)

8:11:56 AM #18 SCSI -1189 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x036E6000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x02

8:11:56 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:11:56 AM #20 Text 0 File Mmc.cpp, Line 21708
Set BUFE: BURN-Proof -> ON

8:12:02 AM #21 Text 0 File Cdrdrv.cpp, Line 1286
08:12:02.807 - PLEXTOR DVDR PX-716A\H3 T0 : Queue again later

8:13:56 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

8:14:02 AM #23 Text 0 File Mmc.cpp, Line 16352
<PLEXTOR DVDR PX-716A > start Close Session

8:15:39 AM #24 SCSI -1176 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x03 0x86 0x58 0x0A
0x00 0x00 0x00 0x00 0x72 0x02

8:15:39 AM #25 CDR -1176 File ThreadedTransferInterface.cpp, Line 1294
Session fixation error

8:15:39 AM #26 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1294
Could not perform Fixation

8:15:39 AM #27 Text 0 File Mmc.cpp, Line 16352
<PLEXTOR DVDR PX-716A > start Close Session

8:15:39 AM #28 SCSI -400 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x27
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x27 0x00

8:15:39 AM #29 CDR -400 File ThreadedTransferInterface.cpp, Line 1294
Unspecified target error

8:15:39 AM #30 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1294
Could not perform Fixation

8:15:39 AM #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 48x (7,200 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 10:16:48 AM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 10/24/2002 3:59:48 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Bill Artman
Bill Artman Photography, Inc.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <PLEXTOR DVDR PX-716A> Version: 1.08 - HA 3 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 3
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Version: DGS3 - HA 3 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6B160P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 3 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 3 ID 1 DMA: On

=== CDRom-Device-Map ===
PLEXTOR DVDR PX-716A E: CDRom0
JLMS XJ-HD166S F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095852kB)
Free physical memory: 1535MB (1571980kB)
Memory in use : 24
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

28.8.2005
CD-ROM (ISO)
8:26:29 AM #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

8:26:29 AM #2 Text 0 File Burncd.cpp, Line 2948
PLEXTOR DVDR PX-716A
BURN-Proof activated

8:26:29 AM #3 Text 0 File Reader.cpp, Line 127
Reader running

8:26:29 AM #4 Text 0 File Writer.cpp, Line 122
Writer PLEXTOR DVDR PX-716A running

8:26:29 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

8:26:29 AM #6 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using CD-R/RW media

8:26:29 AM #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 228418 ( 50:47.43)

8:26:29 AM #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

8:26:29 AM #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PLEXTOR DVDR PX-716A;
CDR code: 00 97 27 58; OSJ entry from: Mitsui Chemicals, Inc.
ATIP Data:
Special Info [hex] 1: C0 00 B0, 2: 61 1B 3A (LI 97:27.58), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

8:26:29 AM #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

8:26:29 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 228419 (228419) = #228419/50:45.44
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 228417 blocks [PLEXTOR DVDR PX-716A]
--------------------------------------------------------------

8:26:29 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PLEXTOR DVDR PX-716A] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 468109312, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
228419 | lead-out | 1 | 0x41 | 0x00

8:26:29 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 228419 -> 228417.

8:26:29 AM #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

8:26:30 AM #15 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

8:26:30 AM #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

8:26:30 AM #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 48x (7,200 KB/s)

8:26:30 AM #18 SCSI -1189 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x036E6000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x02

8:26:30 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:26:30 AM #20 Text 0 File Mmc.cpp, Line 21708
Set BUFE: BURN-Proof -> ON

8:26:33 AM #21 Text 0 File Cdrdrv.cpp, Line 1286
08:26:33.635 - PLEXTOR DVDR PX-716A\H3 T0 : Queue again later

8:28:27 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

8:28:32 AM #23 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 48x (7,200 KB/s)

8:28:32 AM #24 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started

8:28:35 AM #25 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 228419 -> 228417.

8:30:28 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

8:30:28 AM #27 Phase 80 File dlgbrnst.cpp, Line 1832
Data verification completed successfully

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 10:16:48 AM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.1135 (xpsp2.020921-0842), size=87040 bytes, created 10/24/2002 3:59:48 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

creaky · Aug 30, 2005

this is what denotes each section of log "====== *** Nero-Burning Rom, History File *** ======".

just having a look at the last secton now. in the meantime there are other sections with serial numbers down the log, pls edit them out, they'll get stolen otherwise...

creaky · Aug 30, 2005

1A23-*********************************
Click to expand...

- edit out any references to your serial number

Recorder: PLEXTOR DVDR PX-716A;
CDR code: 00 97 27 58; OSJ entry from: Mitsui Chemicals, Inc.
ATIP Data:
Special Info [hex] 1: C0 00 B0, 2: 61 1B 3A (LI 97:27.58), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

Sense Key: 0x03 (KEY_MEDIUM_ERROR)

Session fixation error

Could not perform Fixation

Unspecified target error

Could not perform Fixation
Click to expand...

- the burner has a problem with the discs. if my other suggestions don't help, ditch the Mitsui discs..

Burn process failed at 48x (7,200 KB/s)
Click to expand...

- i burn max 16x or 24x at a push

Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created 11/17/2004 10:16:48 AM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
Click to expand...

- you have Roxio installed (CDR* driver on 1st line) and Nero's InCD. InCD is packet writing software. both Roxio and packet writing can interfere with standard Nero Burning Rom, so try uninstalling Roxio (you may need to google search for Roxio Zapper to fully uninstall Roxio). As to InCD, to get rid of it you have to uninstall Nero, uninstall completely via Nero's Clean Tools, then reinstall Nero WITHOUT intalling InCD

artmanb · Aug 30, 2005

Creaky;

Thanks for your reply -

How do I edit my serial number to remove it after I have already posted the history log to the forum?

Thank You!

creaky · Aug 30, 2005

The edit function is little pencil icon at right of the posts..

artmanb · Aug 30, 2005

Hello Creaky;

I have a final question for you please. Per you suggestion, I have downloaded and used the Roxio Zapper to completely remove any lingering trace of Roxio.

You say to also uninstall Nero completely using your described procedure and then reinstall WITHOUT InCD4 as that Nero software uses packet writing software. My question - if InCD4 is part of the Nero package/suite I would assume ?? that it should work with the other Nero suite components.

Please give me your thoughts. Thanks very much for your help.

creaky · Aug 31, 2005

Most people probably don't use packet writing anymore. In my opinion its outdated. I don't know/concern myself so much about why certain things like this don't work together, as in time any potential conflicts get worked out by the companies

artmanb · Aug 31, 2005

Creaky, thank you for all of your help on my question. Have a great week!

Log in or Sign up

What is a "Could Not Perform Fixation" error?

artmanb Member

creaky Moderator Staff Member

artmanb Member

creaky Moderator Staff Member

creaky Moderator Staff Member

artmanb Member

creaky Moderator Staff Member

artmanb Member

creaky Moderator Staff Member

artmanb Member

Share This Page

Log in or Sign up

What is a "Could Not Perform Fixation" error?

artmanb Member

creaky Moderator Staff Member

artmanb Member

creaky Moderator Staff Member

creaky Moderator Staff Member

artmanb Member

creaky Moderator Staff Member

artmanb Member

creaky Moderator Staff Member

artmanb Member

Share This Page

Useful Searches