I've briefly scanned through some other peoples write error problems and haven't found anything similar, so if this problem has been posted before i apologize. I've been using Nero 6.0.0.00 for a very long time without any problems. I've probably backed up over 50 DVD's without a single nero issue. Recently i've reformated my computer and finally brang myself to download and install the SP2 update. After reinstalling nero windows said it has a known compatibility issue with 6.0. So i went to nero's site and got the latest version (Major updates 1 and 2). Then i tried to burn a DVD from the .vob files. It goes through the entire burn process untill the very end it says i get some kind of disc at once error and the burn fails. I've tried reinstalling Nero and i've tried using a different movies .vob files with the exact same results. I've made 3 coasters now and i'm completely stumped. Here's my logfile: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b Recorder: <TOSHIBA ODD-DVD SD-R5272>Version: 1030 - HA 1 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <CyberDrv CW058D CD-R/RW >Version: 110D - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST360020A atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD2000JB-00FUA0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : CyberDrv CW058D CD-R/RW atapi Port 1 ID 0 DMA: On CdRomPeripheral : TOSHIBA ODD-DVD SD-R5272 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === CyberDrv CW058D CD-R/RW F: CDRom0 TOSHIBA ODD-DVD SD-R5272 G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1047064kB) Free physical memory: 617MB (632228kB) Memory in use : 39 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 1.9.2005 UDF/ISO compilation 10:54:42 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 10:54:43 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 10:54:43 PM #3 Text 0 File Isodoc.cpp, Line 6356 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:54:43 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 10:54:43 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 10:54:43 PM #6 Text 0 File Writer.cpp, Line 122 Writer TOSHIBA ODD-DVD SD-R5272 running 10:54:43 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:54:43 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:54:43 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 10:54:43 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2274591 (505:27.66, 4442MB) 10:54:43 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 10:54:43 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: TOSHIBA ODD-DVD SD-R5272, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 10:54:43 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:54:43 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2274592 (2274592) = #2274592/505:27.67 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2274592 blocks [TOSHIBA ODD-DVD SD-R5272] -------------------------------------------------------------- 10:54:43 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [TOSHIBA ODD-DVD SD-R5272] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4658364416, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2274592 | lead-out | 1 | 0x41 | 0x00 10:54:44 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 10:54:44 PM #17 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 10:54:44 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 10:54:44 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 10:54:44 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:54:44 PM #21 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: CMC.MAG. Media type ID: E01 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8 23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 10:54:44 PM #22 Text 0 File DVDPlusRW.cpp, Line 665 Start write address at LBA 0 DVD high compatibility mode: Yes 11:08:50 PM #23 Text 0 File WriterStatus.cpp, Line 116 <TOSHIBA ODD-DVD SD-R5272> start writing Lead-Out at LBA 2274592 (22B520h), lenght 0 blocks 11:08:50 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:09:43 PM #25 SCSI -1135 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x039D6200 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 11:09:43 PM #26 CDR -1135 File ThreadedTransferInterface.cpp, Line 1909 Write error 11:09:43 PM #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1909 Could not perform end of Disc-at-once 11:09:43 PM #28 SCSI -1046 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 11:09:43 PM #29 SCSI -1046 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 11:09:43 PM #30 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 11:09:43 PM #31 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 11:09:43 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
Recorder: <TOSHIBA ODD-DVD SD-R5272>Version: 1030 new firmware is 1031 get it here http://forum.rpc1.org/dl_result.php?kaj=1&isces Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2274591 (505:27.66, 4442MB) your burning to close to the edge 4442, set target size to 4300 with your software Disc Manufacturer ID: CMC MAG, Media Type ID: E01, quality media is a must try verbatim, taiyo yuden, sony Burn process failed at 4x (5,540 KB/s) with the discs you are using try burning at 2x peace
Ok, i updated my firmware and tried again, still no luck. As far as changing my target size, i'm assuming that your meaning the target total file size that my shrink program uses. I'm using CloneDVD2 v2.4.3.1 and there is no option to choose your target size. Nonetheless, i've been using this exact same setup (including these same TDK discs)for a while now. In fact i pretty much follow the CloneDVD2/Nero guide that's here at afterdawn. Does anyone see anything else in my logfile that could be causing this error?
in clonedvd2 after you choose what you want to do(first screen), in the second screen down by the quality bar you see dvd-5 and arrow bar, click the arrow and choose custom and set to 4300 post your last log peace
This was my last burn. I'm compressing a new set of .vob's right now using your instructions for a custom size using cloneDVD. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b Recorder: <TOSHIBA ODD-DVD SD-R5272>Version: 1030 - HA 1 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <CyberDrv CW058D CD-R/RW >Version: 110D - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST360020A atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD2000JB-00FUA0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : CyberDrv CW058D CD-R/RW atapi Port 1 ID 0 DMA: On CdRomPeripheral : TOSHIBA ODD-DVD SD-R5272 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === CyberDrv CW058D CD-R/RW F: CDRom0 TOSHIBA ODD-DVD SD-R5272 G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1047064kB) Free physical memory: 617MB (632228kB) Memory in use : 39 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 1.9.2005 UDF/ISO compilation 10:54:42 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 10:54:43 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 10:54:43 PM #3 Text 0 File Isodoc.cpp, Line 6356 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:54:43 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 10:54:43 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 10:54:43 PM #6 Text 0 File Writer.cpp, Line 122 Writer TOSHIBA ODD-DVD SD-R5272 running 10:54:43 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:54:43 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:54:43 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 10:54:43 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2274591 (505:27.66, 4442MB) 10:54:43 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 10:54:43 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: TOSHIBA ODD-DVD SD-R5272, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 10:54:43 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:54:43 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2274592 (2274592) = #2274592/505:27.67 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2274592 blocks [TOSHIBA ODD-DVD SD-R5272] -------------------------------------------------------------- 10:54:43 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [TOSHIBA ODD-DVD SD-R5272] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4658364416, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2274592 | lead-out | 1 | 0x41 | 0x00 10:54:44 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 10:54:44 PM #17 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 10:54:44 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 10:54:44 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 10:54:44 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:54:44 PM #21 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: CMC.MAG. Media type ID: E01 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8 23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 10:54:44 PM #22 Text 0 File DVDPlusRW.cpp, Line 665 Start write address at LBA 0 DVD high compatibility mode: Yes 11:08:50 PM #23 Text 0 File WriterStatus.cpp, Line 116 <TOSHIBA ODD-DVD SD-R5272> start writing Lead-Out at LBA 2274592 (22B520h), lenght 0 blocks 11:08:50 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:09:43 PM #25 SCSI -1135 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x039D6200 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 11:09:43 PM #26 CDR -1135 File ThreadedTransferInterface.cpp, Line 1909 Write error 11:09:43 PM #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1909 Could not perform end of Disc-at-once 11:09:43 PM #28 SCSI -1046 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 11:09:43 PM #29 SCSI -1046 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 11:09:43 PM #30 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 11:09:43 PM #31 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 11:09:43 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Derek Townsend 1A23-2010-1020-4490-0232-8634 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b Recorder: <TOSHIBA ODD-DVD SD-R5272>Version: 1031 - HA 1 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <CyberDrv CW058D CD-R/RW >Version: 110D - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST360020A atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD2000JB-00FUA0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : CyberDrv CW058D CD-R/RW atapi Port 1 ID 0 DMA: On CdRomPeripheral : TOSHIBA ODD-DVD SD-R5272 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === CyberDrv CW058D CD-R/RW F: CDRom0 TOSHIBA ODD-DVD SD-R5272 G: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1047064kB) Free physical memory: 556MB (570044kB) Memory in use : 45 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 2.9.2005 UDF/ISO compilation 4:35:27 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 4:35:27 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 4:35:27 PM #3 Text 0 File Isodoc.cpp, Line 6356 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 4:35:27 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 4:35:28 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 4:35:28 PM #6 Text 0 File Writer.cpp, Line 122 Writer TOSHIBA ODD-DVD SD-R5272 running 4:35:28 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 4:35:28 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 4:35:28 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 4:35:28 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2274591 (505:27.66, 4442MB) 4:35:28 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 4:35:28 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: TOSHIBA ODD-DVD SD-R5272, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 4:35:28 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:35:28 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2274592 (2274592) = #2274592/505:27.67 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2274592 blocks [TOSHIBA ODD-DVD SD-R5272] -------------------------------------------------------------- 4:35:28 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [TOSHIBA ODD-DVD SD-R5272] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4658364416, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2274592 | lead-out | 1 | 0x41 | 0x00 4:35:28 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 4:35:28 PM #17 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 4:35:28 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 4:35:28 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 4:35:28 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 4:35:28 PM #21 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: CMC.MAG. Media type ID: E01 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8 23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 4:35:28 PM #22 Text 0 File DVDPlusRW.cpp, Line 665 Start write address at LBA 0 DVD high compatibility mode: Yes 4:49:35 PM #23 Text 0 File WriterStatus.cpp, Line 116 <TOSHIBA ODD-DVD SD-R5272> start writing Lead-Out at LBA 2274592 (22B520h), lenght 0 blocks 4:49:35 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 4:50:28 PM #25 SCSI -1135 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x039D6200 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 4:50:28 PM #26 CDR -1135 File ThreadedTransferInterface.cpp, Line 1909 Write error 4:50:28 PM #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1909 Could not perform end of Disc-at-once 4:50:28 PM #28 SCSI -1046 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 4:50:28 PM #29 SCSI -1046 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 4:50:28 PM #30 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 4:50:28 PM #31 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 4:50:28 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
you haven't yet applied any of Bigfatboy's suggestions there. nothing for me to add other than to mention that cmc mag are atrocious quality media
Okay, here's the latest burn.. still failed. I understand the issue with media... but there is no way that all of a sudden every burn attempt would fail. I've been using these same discs for over 50 burns and i'm assuming i can fix this problem without throwing away the remaining 40 that i still have. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b Recorder: <TOSHIBA ODD-DVD SD-R5272>Version: 1031 - HA 1 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <CyberDrv CW058D CD-R/RW >Version: 110D - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST360020A atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD2000JB-00FUA0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : CyberDrv CW058D CD-R/RW atapi Port 1 ID 0 DMA: On CdRomPeripheral : TOSHIBA ODD-DVD SD-R5272 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === CyberDrv CW058D CD-R/RW F: CDRom0 TOSHIBA ODD-DVD SD-R5272 G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1047064kB) Free physical memory: 639MB (654648kB) Memory in use : 37 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 3.9.2005 UDF/ISO compilation 3:24:01 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 3:24:01 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 3:24:01 PM #3 Text 0 File Isodoc.cpp, Line 6356 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 3:24:01 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 3:24:02 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 3:24:02 PM #6 Text 0 File Writer.cpp, Line 122 Writer TOSHIBA ODD-DVD SD-R5272 running 3:24:02 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 3:24:02 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 3:24:02 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 3:24:02 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2093423 (465:12.23, 4088MB) 3:24:02 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 3:24:02 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: TOSHIBA ODD-DVD SD-R5272, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 3:24:02 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:24:02 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2093424 (2093424) = #2093424/465:12.24 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2093424 blocks [TOSHIBA ODD-DVD SD-R5272] -------------------------------------------------------------- 3:24:02 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [TOSHIBA ODD-DVD SD-R5272] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4287332352, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2093424 | lead-out | 1 | 0x41 | 0x00 3:24:02 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 3:24:02 PM #17 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 3:24:02 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 3:24:02 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 3:24:03 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:24:03 PM #21 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: CMC.MAG. Media type ID: E01 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8 23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 3:24:03 PM #22 Text 0 File DVDPlusRW.cpp, Line 665 Start write address at LBA 0 DVD high compatibility mode: Yes 3:37:01 PM #23 Text 0 File WriterStatus.cpp, Line 116 <TOSHIBA ODD-DVD SD-R5272> start writing Lead-Out at LBA 2093424 (1FF170h), lenght 0 blocks 3:37:02 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 3:37:54 PM #25 SCSI -1135 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x039D6200 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 3:37:54 PM #26 CDR -1135 File ThreadedTransferInterface.cpp, Line 1909 Write error 3:37:54 PM #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1909 Could not perform end of Disc-at-once 3:37:54 PM #28 SCSI -1046 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 3:37:54 PM #29 SCSI -1046 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 3:37:54 PM #30 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 3:37:54 PM #31 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 3:37:54 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
- i don't use this compilation type, i only use 'dvd-video', as do i think most others, however i very much doubt this has anything to do with it..so this is just for info.. - there's nothing else wrong in you log, looks like everything's been tweaked/corrected. i'm afraid 50 good burns on CMC Mags does NOT guarantee success or make them decent. they are the most foul atrocious utter rubbish dvd media you can buy. try a lower speed to use them up but even that won't guarantee success. Hence why i have stuff like this in my sig - [bold]..Memorex/CMC - don't let them near your Burner.....[/bold] - http://forums.afterdawn.com/thread_view.cfm/195438 i used literally about 500 of one type of crap media - i stuck to the same brand/media code for all those discs (Bulkpaq Orange) with zero failed burns/playback errors then got loads of problems. then i found i couldn't playback or copy previously watchable discs. crap media just isn't money well spent
Thats strange about the UDF/ISO thing, because i always choose DVD Video also. This must be the root of my problem. I'm going to try another clean install of Nero and i actually just finished installing the latest version of ClondeDVD.
Well, i uninstalled Nero 6.6 and reinstalled 6.0. I disregarded Windows' 'known compatibility issue' and tried burning like i always have and PRESTO!! it worked. Here's the logfile of the succesful burn, i'd really like to update my version of nero so if anyone can tell me what the difference between my failed attempts and my succesfull attempts is i'd greatly appreciate it. Thx everyone. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 4/2/2003 8:13:44 AM Nero version: 6.0.0.0 Recorder: <TOSHIBA ODD-DVD SD-R5272>Version: 1031 - HA 1 TA 1 - 6.0.0.0 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <CyberDrv CW058D CD-R/RW >Version: 110D - HA 1 TA 0 - 6.0.0.0 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST360020A atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD2000JB-00FUA0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : CyberDrv CW058D CD-R/RW atapi Port 1 ID 0 DMA: On CdRomPeripheral : TOSHIBA ODD-DVD SD-R5272 atapi Port 1 ID 1 DMA: On ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 1022MB (1047064kB) Free physical memory: 582MB (596188kB) Memory in use : 43 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 4.9.2005 UDF/ISO compilation 3:26:59 PM #1 Phase 112 File dlgbrnst.cpp, Line 1818 DVD-Video files reallocation started 3:27:00 PM #2 Phase 114 File dlgbrnst.cpp, Line 1818 DVD-Video files reallocation completed (no file modified) 3:27:00 PM #3 Text 0 File Isodoc.cpp, Line 5451 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 3:27:00 PM #4 Phase 111 File dlgbrnst.cpp, Line 1818 DVD-Video files sorted 3:27:00 PM #5 Text 0 File Reader.cpp, Line 118 Reader running 3:27:00 PM #6 Text 0 File Writer.cpp, Line 127 Writer TOSHIBA ODD-DVD SD-R5272 running 3:27:00 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3814 First writeable address = 0 (0x00000000) 3:27:00 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3814 First writeable address = 0 (0x00000000) 3:27:00 PM #9 Text 0 File Burncd.cpp, Line 3081 Turn on Disc-at-once, using DVD media 3:27:00 PM #10 Text 0 File DlgWaitCD.cpp, Line 224 Last possible write address on media: 2295103 (510:01.28) Last address to be written: 2093423 (465:12.23) 3:27:00 PM #11 Text 0 File DlgWaitCD.cpp, Line 229 Write in overburning mode: FALSE 3:27:00 PM #12 Text 0 File DlgWaitCD.cpp, Line 1688 Recorder: TOSHIBA ODD-DVD SD-R5272, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 3:27:00 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 757 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 2093424 (2093424) = #2093424/465:12.24 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2093424 blocks [TOSHIBA ODD-DVD SD-R5272] -------------------------------------------------------------- 3:27:00 PM #14 Text 0 File Burncd.cpp, Line 3318 Recorder and media-info ======================= Burning to TOSHIBA ODD-DVD SD-R5272 on a DVD+R media 3:27:00 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 910 Prepare recorder TOSHIBA ODD-DVD SD-R5272 for write in cue-sheet-DAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD fixated Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 -7327744 3:27:01 PM #16 Phase 24 File dlgbrnst.cpp, Line 1818 Caching of files started 3:27:01 PM #17 Phase 25 File dlgbrnst.cpp, Line 1818 Caching of files completed 3:27:01 PM #18 Phase 36 File dlgbrnst.cpp, Line 1818 Burn process started at 4x (5,520 KB/s) 3:27:01 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 3:27:01 PM #20 Text 0 File Cdrdrv.cpp, Line 7827 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 03 43 4D 43 20 4D 41 - 47 00 45 30 31 00 38 23 ..CMC.MAG.E01.8# 54 37 10 02 38 6A 02 88 - 67 15 15 0B 0B 08 08 01 T7..8j..g....... 19 1B 0C 0C 0C 0D 01 00 - 00 00 00 00 00 00 00 01 ................ 3:27:01 PM #21 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 13:10,942 (790942ms) -> OK 3:27:01 PM #22 Text 0 File DVDPlusRW.cpp, Line 513 Start write address at LBA 0 DVD high compatibility mode: Yes 3:39:59 PM #23 Text 0 File WriterStatus.cpp, Line 112 <TOSHIBA ODD-DVD SD-R5272> start writing Lead-Out at LBA 2093424 (1FF170h), lenght 0 blocks 3:40:00 PM #24 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 3:40:54 PM #25 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 0:00,000 (0ms) -> OK 3:40:54 PM #26 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 0:00,000 (0ms) -> OK 3:40:54 PM #27 Phase 37 File dlgbrnst.cpp, Line 1818 Burn process completed successfully at 4x (5,520 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
- you've gone back to a prehistoric version of Nero - unsurprisingly Nero's too old to recognise your burner - sigh. i've tried to help you re changing the media. this is the problem with landfill quality media, you've had 1 successful burn here and that's the point of crap media, it's inconsistent. Your success is NOT down to an outdated version of Nero.. By all means stay like this and see how far you get with those remaining discs. However as i've already stated, 50 good burns on trash media won't last, never mind playback problems down the line. Ah well, keep this thread in mind for the near future
@nizers, I highly recommend you listen to Creaky, he's one of the most knowledgeable members here at AD.com -- not only that but he knows what he's talking about in regards to media and Nero. I can assure you that he'll guide/help/tweak you to the right direction. I've been here for awhile and believe me, he has been helping tons and tons and possibly hundreds of newbies to solve their misery regardless if it's Nero or media issues. Now, do me a favor and "don't ever" get your hands on Memorex or CMC MAG products again. If you value your backup copies and want them to last then get yourself some genuine Taiyo Yuden (including Fuji & Sony "made in japan"), Verbatim (MCC003, MCC004) and Maxell "made in japan" media for your future backups. Evidently, these are top notch media and they're rank #1 in the media technology. Good luck and happy burning..!!
First of all let me say Thank You for all of your guy's help with this problem. I do realize that there are some brands of media out there that aren't worth the time it takes to go buy them. Apparently this seems to be the case in my situation. But, like i said, i still have 40 or so of these discs and i'm not about to just chuck them out the window. I will definitly be shopping for some quality media here in the near future. Thank You. As far as me having success again with version 6.0 i find it extremely hard to believe that it's merely a coincidence. Let's see... 50+ successful burns with 6.0, upgrade to 6.6 and have 5 failed burns in a row, roll back to 6.0 again and continue to have succesful burns, totally 10 now. Media quality aside, Nero 6.0 has a record of 60 good burns and not a single failed burn. 6.6 hasn't produced a succesful burn but has made me 5 new stylish Pepsi can place-mats... all with the same media. Now common sense tells me that there must be some sort of problem with the software. Please don't take this as me not believing that my media is considered garbage by industry standards, but isn't it quite possible that the problem lies elsewhere in this particular case??
you're quite right, anything's possible, BUT.. Nero logs are very good at summarising a system's setup, and the very least we can do from a troubleshooting perspective, is to address ALL problems within it. ie if there are things within a logfile that aren't addressed, we can't blame the software, especially if the unaddressed items are one of THE most important aspects of burning - the media. I'm not trying to argue or drag this out, but i, and many people around here know a lot about this stuff and eat Nero logs for breakfast (i alone must see 20 or so every single day). Version 6.x.x.x has been out for quite some time and until you rule out the media (and anything major left unaddressed in Nero logs) you cannot blame the software. Untold thousands of people use this software and we see a lot of them here, and the most common causes are DMA, outdated firmware, software conflicts, too high a burn speed, but the most critical part of the puzzle is media.. as i mentioned further up the thread - Since my horrendous Bulkpaq days i found out the discs were FAKEs of Taiyo Yuden media, as well as crap quality. Needless to say I no longer have burning problems (apart from the odd self-inflicted mistake) as i keep everything up to date and use only decent media, and research stuff like this most nights of the week.. Have a look at the 2 links in my signature for more info on what bad media causes. I've replied at length in this thread (not something i do too often) as every now and then someone comes along who disbelieves how important media is in the whole burning scenario (pls don't take that the wrong way)..
@creaky, I'm not quite on par with you yet buddy. I still have a long way to go, but I guess I'm ok for now. @nizers, I'm 100% with creaky on this case. The real issue here is definitely the bad media aka CMC MAG. Statistically, it's either a media or firmware issue, but that's inevitable. I'm not going to argue and I'm sorry if you've had successful burned with CMC MAG and deem that it’s a "software" issue instead of the crap media. As much as I hate to mention the name Memosux, it is obvious that CMC is inferior when comparing to other media, not only that but comparing to the media technology now-a-day, and seriously that media is no good in contrast. Additionally, it won't do any good to you in the long run, especially if you value the quality and longevity of your backups. However, I respect your opinion and I clearly understand that everyone is entitled to their own judgment, so if you believe that it is "not" the media, then just go with what's floating in your boat. On the other hand, I can assure you that the majority members here at AD.com will agree that CMC MAG is a crap, and or is a poor media if not 100% but 95% most of the time.
