I have ripped the files from 2 smaller dvds and want to know if its possible to burn the 2 set of files together on one dvd. should be about 3.9 gb total together. I tried dropping the files in the video folder together but Nero will not accept them both since they are named the same.. What can i do? Rename files? if so. how? using nero burning rom 6.0 . Thanks in advance for anyhelp and your time.
It might be easier to use Shrink. Use Open Files to open the first clip. Once Shrink finishes analyzing, select reauthor. Drag the clip (Title 1) into the compilation window. On the right, open the file browser menu and find the second file. Double click to select. Drag it over to the right as well. It will also analyse. In the compilation window you should have this: Title 1 Title 1(2) Have Nero enabled in Edit> Preferences> File I/O. Put a blank in, select "Backup!" From the Backup DVD menu, select your DVD burner as the target. Select OK. Shrink will begin encoding and then open Nero to burn your DVD.
Hello FasFrank i followed what you told me too do but i got this error message when it got to the burning dvd part. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 4/2/2003 11:13:43 AM Nero API version: 6.0.0.0 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: < DVD+RW RW5125> Version: 1.27 - HA 1 TA 0 - 6.0.0.0 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : Maxtor 6B200P0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6B200P0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : DVD+RW RW5125 atapi Port 1 ID 0 DMA: On CdRomPeripheral : COMPAQ DVD-ROM SD-612B atapi Port 1 ID 1 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: ? ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 1022MB (1047340kB) Free physical memory: 700MB (717616kB) Memory in use : 31 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 6.9.2005 NeroAPI 8:05:54 AM #1 Phase 112 File APIProgress.cpp, Line 232 DVD-Video files reallocation started 8:05:54 AM #2 Phase 114 File APIProgress.cpp, Line 232 DVD-Video files reallocation completed (no file modified) 8:05:54 AM #3 Phase 111 File APIProgress.cpp, Line 232 DVD-Video files sorted 8:05:54 AM #4 Text 0 File Reader.cpp, Line 118 Reader running 8:05:54 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3814 First writeable address = 0 (0x00000000) 8:05:54 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3814 First writeable address = 0 (0x00000000) 8:05:54 AM #7 Text 0 File Burncd.cpp, Line 3081 Turn on Disc-At-Once, using DVD media 8:05:57 AM #8 Text 0 File DlgWaitCD.cpp, Line 224 Last possible write address on media: 2295103 (510:01.28) Last address to be written: 2156207 (479:09.32) 8:05:57 AM #9 Text 0 File DlgWaitCD.cpp, Line 229 Write in overburning mode: FALSE 8:05:57 AM #10 Text 0 File DlgWaitCD.cpp, Line 1688 Recorder: DVD+RW RW5125, Media type: DVD+RW 8:05:57 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 757 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 2156208 (2156208) = #2156208/479:9.33 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2156208 blocks [ DVD+RW RW5125 ] -------------------------------------------------------------- 8:05:57 AM #12 Text 0 File Burncd.cpp, Line 3318 Recorder and media-info ======================= Burning to DVD+RW RW5125 on a DVD+RW media 8:05:57 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 910 Prepare recorder DVD+RW RW5125 for write in cue-sheet-DAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD fixated Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 121253888 8:05:57 AM #14 Phase 24 File APIProgress.cpp, Line 232 Caching of files started 8:05:57 AM #15 Phase 25 File APIProgress.cpp, Line 232 Caching of files completed 8:05:57 AM #16 Phase 36 File APIProgress.cpp, Line 232 Burn process started at 2.4x (3,312 KB/s) 8:05:57 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 8:05:57 AM #18 SCSI -1066 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x027C6000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 8:05:57 AM #19 Phase 98 File APIProgress.cpp, Line 232 Start formatting disc before burning 8:05:57 AM #20 SCSI -1024 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x027C7000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x08 Sense Qual: 0x03 CDB Data: 0x04 0x11 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x08 0x03 8:05:57 AM #21 Phase 101 File APIProgress.cpp, Line 232 Formatting disc failed 8:05:57 AM #22 Text 0 File DVDPlusRW.cpp, Line 513 Start write address at LBA 0 DVD high compatibility mode: Yes 8:05:57 AM #23 CDR -1024 File ThreadedTransferInterface.cpp, Line 1508 Communication failure 8:05:57 AM #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1508 Could not perform start of Disc-at-once 8:05:57 AM #25 Phase 38 File APIProgress.cpp, Line 232 Burn process failed at 2.4x (3,312 KB/s) Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Any idea what i may have done wrong... Or what happened? Thanks again for your time.
Hi Gamedogs, The burn itself failed at the point when it was supposed to format your blank. Are you using a DVD +RW disc? Some possible causes: First your Nero needs updated: [bold]Nero API version: 6.0.0.0 Using interface version: 6.3.1.4 [/bold] New version is 6.6.0.16 You can get it here: http://nero.com/us/Nero_6_Ultra_Edition_Update_Update.php Before you download the new version, run Nero's clean tool to remove the old program completely. Make sure you have your Nero serial number written down. http://nero.com/us/Nero_6_CleanTool.html Your burner's firmware is very outdated, the newest version is 1.72, you have 1.27. You can find a FW update here: http://www.ricoh.com/drive/asia/support/download/mp5125a/ Here Nero errors because it thinks your blank is not formatted. It then tries to format the blank, which it fails to do. So it errors again: [bold]8:05:57 AM #18 SCSI -1066 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x027C6000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 8:05:57 AM #19 Phase 98 File APIProgress.cpp, Line 232 Start formatting disc before burning 8:05:57 AM #20 SCSI -1024 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x027C7000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x08 Sense Qual: 0x03 CDB Data: 0x04 0x11 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x08 0x03 8:05:57 AM #21 Phase 101 File APIProgress.cpp, Line 232 Formatting disc failed [/bold] This may be a problem with the DVD-RW blank you are using. Sometimes they do go bad but it is rare. I have had 6 Imation DVD+RW DVDs and have used them hundreds of times. I have one that will not format. Nero should have kicked the disc back out of your drive, but didn't. That is why it's important to get your old Nero removed correctly and the new version installed. Firmware will help you as well. You current firmware was up to date in 2002. Time to upgrade!! Let me know how it works out. It does look like the Shrink compilation would have worked. That didn't cause the problems you see on your burn log. Frank Edit: Afterdawn's Nero download is a lot faster than going directly to the Nero site. Try this for the download: http://www.afterdawn.com/software/cdr_software/cdr_applications/nero.cfm
Hey thanks for all the helpfull tips Frank.. I did get it to burn a disk for me on a dvd+R but after it was completed and process was done with no problems the dvd would not play in the pc or the dvd player going to follow your advice and try the nero and firm ware update.. And as soon as i get a few blank DVD+R's ill try it again and let you know how i made out. Unless you feel it will work on a DVD+RW?I have a few of them around here. PEAcE.
Ok updated the Nero no problem. But i tried the FW you pointed me too and i get this messge: Cannot update for different Type Code. *** NG ** NG ** NG *** Make sure Selected Source File. Not sure what this is about.. Do i have the wrong Firm Ware? How do i find out the firm ware info and where to get it? Thanks again for your time and help..
Ok i found and downloaded another FW file and it updated fine.. Just burned the dvd and that too went fine. Thanks for the help and your time Frank.. Apreciated it alot.. Have a goodone.. PEAcE. GameDogs
I'm glad it worked for you! I find firmware to be a pain in the butt to find sometimes. When I reply to threads like yours I usually just enter the drive make and model into Google along with "firmware". For updating my own drives I use DVD Decrypter which has a firmware ID and search feature. It will connect to http://www.rpc1.org and find the correct firmware as well as listing the current firmware. Open Decrypter > Tools > Drive > Check For Firmware Updates... Decrypter is a "must have" program for this and a bunch of other reasons. Frank
