Experiencing Difficulty Using DVD RB and CCE? If So, Then Ask Your Questions Here.

Sophocles

VIDEO_TS is 8.69 Go and when i open the vob files with windvd i've got a black screen

 

The following is from my DVD-RB log:
- Reduction Level for DVD-5: 53.7%
- Overall bitrate : 2,502Kbs
- Space for Video : 3,247,514KB
- HIGH/LOW/AVERAGE Cell Bitrates: 3 305/674/2,502 Kbs

 

[bold]black screen with red lines + a logo with 'Cinema Craft Encoder'[/bold]

Are you using CCE SP Trial? As far as I know it's the only version that displays a CCE logo. If that's so then you will have to review your setup and be sure that you've also installed eclcce or it won't work at all.

Below is an extraction from Vubal's guide regarding the use of CCE SP trial and setup.

_X_X_X_X_X_[small]

Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth." Sherlock Holmes (by Sir Arthur Conan Doyle, 1859-1930)[/small]

 

Here's the link for the eclcce file that supports 2.66+ trial:

http://home.t-online.de/home/340044300675/eclcce.zip

 

Thanks for your advice but i already use Eclcce (1.81) with my CCE sp 2.50 trial

Maybe i should use an early version of eclcce

 

Actually, I've never used the trial, so I can't be of much more help. After a few hours of frustration trying to install it I spent the $58 for CCE Basic. That install went smoothly. I've made 150+ backups since then, and I consider it the best $58 I've ever spent on video software. When it comes to quality, it made all the other transcoders obsolete.

 

Doc409,

I went the same route as you. I was attempting to use the trial software and had nothing but problems. After reading countless post on how good this product was. I went for it. I have backed-up oonly a few movies at this point. However, it is clear to see how this product is far better then other tools.

 

Alas my story is somewhat the same as Doc's and Gnomex's but with one small difference. I read about the problems that others were having with the CCE SP trial and met Vurbal at about the same time and he conviced me to go for it. I never regretted.

 

Anybody I still can not backup a thing always run-time error '6' overflow. I use retail verison cce basic and RB version from 5.7 to 5.9.

 

Hey is there anyway to get rid of the CINEMA CRAFT sign when the DVD plays

 

Just sticking my nose in to say that I finally got RB/CCE to work. I got some package from somewhere that installs the whole set up in one go.
I just copied Good Will Hunting (6.6Gig).
And the quality is absolutely awesome, so sharp and crystal clear. The colours are better and the picture is brighter.
Took 5 hours though but I think that's because it is set on 4 passes by default.
Better change that.

 

There is but, i am not allowed to talk about it here

 

chjoy

Have you posted your ini setup information. My advice is to delete everything and start from scratch. Keep everything simple and clean and on a single disk.

Questions

Do you have avisynth version 2.54?

Is MPEG2Dec3dg.dll in the same folder as RB (yes it can be with avisynth too but this is keeping it simple)?

Delete your setup folder and do it all over again according to Vurbal's guide, read it carefully and then choose nothing other than what it suggests. I know this is annoying but you're missing something.

There are only two possibilities. Your setup, or your system which means you might have to do an operating system reinstall. (reformat)

From a website:http://www.medlin.com/faq14.htm

Error 6 - Overflow
Usually means your data files have been damaged. Reinstalling the program will not hurt, but is unlikely to help. (When a program is damaged, it will not open far enough to get to an error message.) Most likely you will need to restore your data files from a backup or delete the data files and start over. Also can occur if you are using a pre-2000 version of Medlin with the Windows NT operating system.



http://support.microsoft.com/defaul...port/kb/articles/Q171/8/37.asp&NoWebContent=1

 

Agent K, unless you are using CCE SP, you can't have more than 2 passes with CCE basic. In fact I have heard that if you set Basic for more than 2 passes it reverts back to one pass. If you are using SP trial then you can do more than two passes but you have the watermark.

You didn't buy CCE SP for 2,000.00 did ya? If you did I wanna be your friend, lol

4-5 hours is not unusual with RB/CCE, especially if the files are large. I just did a James Bond flick and it took 6 hours with 2 passes, but I did keep ALL extras including previews.

 

Hey BigO,

Is it true that Cinemacraft will get rid of the water mark on the SP trial for $58?

 

can anyone e-mail me how to take the CINEMA CRAFT logo off the DVD when i watch it

 

can anyone e-mail me how to take the CINEMA CRAFT logo off the dvd when it plays.

noemailaddresses@here.com

 

damrong18

Posting email addresses is against forum rules and asking someone to help you do something illegal only makes it worse. You could be banned for that. When brobear said that you could remove the logo for $58, he meant if you buy it then you won't have a logo to worry about. You are also using a thread that has been set aside for serious use not for off topic discussions.

And guys, take this type of discussion to the "which transcoder produces the best picture thread."
_X_X_X_X_X_[small]

Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth." Sherlock Holmes (by Sir Arthur Conan Doyle, 1859-1930)[/small]

 

damrong18
You get to be the recipient of spam and crazy mail once the bots pick up your email address. Happy days. You may want to remove it before it gets to every spammer on the net.
_X_X_X_X_X_[small][bold]'brobear'[/bold]



I was an earth-rim walker, a lurker at the threshold of the abyss. - Grendel -

[bold]Et tu, Brute![/bold][/small]