Here is the log file. Sometimes I can bur one then it will fail other times I can not burn at all even after a fresh reboot...here is the log file: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/13/2005 1:50:16 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.15 Internal Version: 6, 6, 0, 15h (Nero Express) Recorder: <SONY DVD RW DW-D56A> Version: PFS3 - HA 0 TA 1 - 6.6.0.15 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <SONY DVD RW DW-D56A >Version: PFS3 - HA 0 TA 1 - 6.6.0.15 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === DiskPeripheral : FUJITSU MHV2100AT atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DW-D56A atapi Port 0 ID 1 DMA: On === CDRom-Device-Map === SONY DVD RW DW-D56A E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1046960kB) Free physical memory: 434MB (444608kB) Memory in use : 57 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 15.9.2005 ===== Disc-Copy over image - 1st step : Copy to image ... 10:19:43 AM #1 Text 0 File Reader.cpp, Line 127 Reader running 10:19:43 AM #2 Phase 48 File dlgbrnst.cpp, Line 1832 Analyzing disc 10:19:43 AM #3 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 10:19:48 AM #4 CDCOPY -1 File CDCopy.cpp, Line 1912 The CD is copyrighted 10:19:49 AM #5 Text 0 File CDCopy.cpp, Line 2128 _Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_ Track 1: 0 0 ( 0:02.00) 51111 51110 ( 11:23.35) 10:19:49 AM #6 Text 0 File CDCopy.cpp, Line 840 Copy options: copy on-the-fly: ON read ISRC/MCN: OFF use jitter correction: OFF data options ignore read error: ON write defekt blocks OFF read raw data: OFF read r-w subchannel data: OFF audio options ignore read error: ON read indexes: OFF read r-w subchannel data: OFF source disc does not look like CD Extra 01. 0 - 51111 = 51111, data (TRM_DATA_MODE1, block size 2048) 10:19:49 AM #7 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using CD-R/RW media 10:19:49 AM #8 Text 0 File DlgWaitCD.cpp, Line 269 Last possible write address on media: 445499 ( 99:01.74) Last address to be written: 51110 ( 11:23.35) 10:19:49 AM #9 Text 0 File DlgWaitCD.cpp, Line 281 Write in overburning mode: NO (enabled: CD) 10:19:49 AM #10 Text 0 File DlgWaitCD.cpp, Line 2477 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 10:19:49 AM #11 Text 0 File DlgWaitCD.cpp, Line 447 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:19:49 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 51111 (51111) = #51111/11:21.36 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 51111 blocks [Image Recorder] -------------------------------------------------------------- 10:19:49 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 104982528, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 51111 | lead-out | 1 | 0x41 | 0x00 10:19:49 AM #14 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 10:19:49 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:20:54 AM #16 Text 0 File WriterStatus.cpp, Line 116 < Image Recorder > start writing Lead-Out at LBA 51111 (C7A7h), lenght 0 blocks 10:20:54 AM #17 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:20:57 AM #18 Phase 121 File dlgbrnst.cpp, Line 1832 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 10:21:01 AM #1 Text 0 File Burncd.cpp, Line 2946 SONY DVD RW DW-D56A Power-Burn activated 10:21:01 AM #2 Text 0 File Reader.cpp, Line 127 Reader running 10:21:01 AM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x00 Finalized = 0 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 104982528 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=954437:08.46 ( -150) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=954437:08.46 ( -150) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=11:21.36 ( 51111) RecDep=0x00 MTYP: Mediumtype = CD (old format) (0x1) Image file name: <C:\Documents and Settings\Timl\My Documents\TempImage.nrg> 10:21:01 AM #4 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using CD-R/RW media 10:21:31 AM #5 Text 0 File DlgWaitCD.cpp, Line 269 Last possible write address on media: 359844 ( 79:59.69) Last address to be written: 51110 ( 11:23.35) 10:21:31 AM #6 Text 0 File DlgWaitCD.cpp, Line 281 Write in overburning mode: NO (enabled: CD) 10:21:31 AM #7 Text 0 File DlgWaitCD.cpp, Line 2477 Recorder: SONY DVD RW DW-D56A; CDR code: 00 97 15 17; OSJ entry from: Ritek Co. ATIP Data: Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 10:21:31 AM #8 Text 0 File DlgWaitCD.cpp, Line 447 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: CD-R/RW.) 10:21:31 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - CD-ROM Mode 1, Joliet) 2 indices, index0 (150) provided original disc pos #0 + 51111 (51111) = #51111/11:21.36 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_ULTRARAW96_MODE1, 2448, config 4, wanted index0 0 blocks, length 51111 blocks [SONY DVD RW DW-D56A] -------------------------------------------------------------- 10:21:31 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [SONY DVD RW DW-D56A] for write in raw writing DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos 0 367200 125486928, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 51111 | lead-out | 1 | 0x41 | 0x00 10:21:31 AM #11 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 24x (3,600 KB/s) 10:21:31 AM #12 SCSI -1080 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03994E00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x3A Sense Qual: 0x00 CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3A 0x00 10:21:31 AM #13 SCSI -1080 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03997600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x3A Sense Qual: 0x00 CDB Data: 0x52 0x01 0x00 0x00 0x00 0xFF 0x00 0x00 0x1C 0x00 0x00 0x00 Sense Data: 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3A 0x00 10:21:31 AM #14 SCSI -1080 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03997800 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x3A Sense Qual: 0x00 CDB Data: 0x25 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3A 0x00 10:21:31 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:21:31 AM #16 Text 0 File Mmc.cpp, Line 16883 StartDAO : CD-Text - Off 10:21:31 AM #17 SCSI -1080 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x03994E00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x3A Sense Qual: 0x00 CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3A 0x00 10:21:31 AM #18 CDR -1080 File ThreadedTransferInterface.cpp, Line 1763 Disc not present 10:21:31 AM #19 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1763 Could not perform start of Disc-at-once 10:21:31 AM #20 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 24x (3,600 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/13/2005 1:50:16 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 1/12/2005 6:03:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 14, 1, size=99456 bytes, created 4/12/2005 11:07:50 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 14, 1, size=29056 bytes, created 4/12/2005 11:07:30 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 14, 1, size=8704 bytes, created 4/12/2005 11:07:54 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 8:00:00 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
- see last paragraph, if removing Nero's InCD doesn't help, try different media - remove Nero's InCD as per next paragraph. if this doesn't help, try different media - remove InCD (packet writing' software) via uninstalling Nero, uninstall completely via Nero's Clean Tools then reinstall Nero WITHOUT installing InCD
