Power calibration error when trying to burn a cdr? First time this has happened and it won't stop doing it. Included the log file. http://www.dsfrobots.com/temp/Log.txt
@dsfii Here's what Nero recommends = straight from their website: * Update the firmware of your recorder. Please check the manufacturer's website for the latest version. * Try another brand of CD-R or CD-RW media. * Try different power connectors, and for recorders, do not share power with other devices. It needs its own power connector. If the error occurs with an external recorder, the power source in the chassis could be the cause. As a test, try to take the recorder out of the external chassis and connect it internal. * Try different configurations, such as taking the CD-ROM to the primary IDE bus as slave and have only the recorder connected to the secondary IDE bus as master. * Send the recorder in for service. are a direct correlation to the 2nd suggestion by Nero. CMC is a pretty crappy manufacturer. Buy some good cd's like Fuji & Maxell (look for made in Japan) This could take care of your problem. I was unable to found your drive at http://forum.rpc1.org/dl_all.php so I don't know if your firmware is up to date. Check the manufacturers website. Wow you need to shut some processes down. You should update Nero - The latest version of Nero is 6.6.0.16 -
Nope no good - CMC is a big manufacturer for Memerox. Their stuff is usually nothing but problems. Even if it does burn it will degrade.
