Im trying to burn audio to a cd, but every time i get the message write error burn process failed. iv tried several burning speeds and differnt types of audio but same problem can you help me please.and Here is the log. Windows 2000 5.0 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34 Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: < RW-481248> Version: 1.07 - HA 2 TA 0 - 6.6.0.16 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: < RW-481248 >Version: 1.07 - HA 2 TA 0 - 6.6.0.16 Adapter driver: <> HA 2 === Scsi-Device-Map === DiskPeripheral : Maxtor 2F040J0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : IDE DVD-ROM 16X atapi Port 1 ID 0 DMA: Off CdRomPeripheral : RW-481248 atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === IDE DVD-ROM 16X D: CDRom0 RW-481248 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 38797312 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 239MB (245232kB) Free physical memory: 60MB (62192kB) Memory in use : 74 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 16.9.2005 Audio CD 21:05:12 #1 CDADOC -1 File Cdadoc.cpp, Line 1465 Audio item log info: Audio document burn settings: ============================= Burn mode: DAO, CD Text: On, Cache disk or network files: No, Cache small files: No, Cache files smaller than 32768 bytes. Audio Multisession: No List of audio tracks: ===================== Track 01: Length: 05:12.30, Pause frames: 150, Filters: 0, Name: '01 Intro.wma'. Track 02: Length: 07:31.19, Pause frames: 150, Filters: 0, Name: '03 Proofs That God Exists.wma'. Track 03: Length: 03:50.52, Pause frames: 150, Filters: 0, Name: '05 Translation.wma'. Track 04: Length: 04:53.30, Pause frames: 150, Filters: 0, Name: '11 The Message of Jesus and all the prophets.wma'. Track 05: Length: 12:14.54, Pause frames: 150, Filters: 0, Name: '13 The Birth of Jesus.wma'. Total size: 33:52.35 21:05:12 #2 Text 0 File Burncd.cpp, Line 2948 RW-481248 Super Link activated 21:05:12 #3 Text 0 File Reader.cpp, Line 127 Reader running 21:05:12 #4 Text 0 File Writer.cpp, Line 122 Writer RW-481248 running 21:05:12 #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 21:05:12 #6 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using CD-R/RW media 21:05:12 #7 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 152284 ( 33:52.34) 21:05:12 #8 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 21:05:12 #9 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: RW-481248; CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 21:05:12 #10 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 21:05:12 #11 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_AUDIO_NOPRE (01 Intro.wma) 2 indices, index0 (150) not provided original disc pos #0 + 23430 (23430) = #23430/5:12.30 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 23430 blocks [RW-481248] 1: TRM_AUDIO_NOPRE (03 Proofs That God Exists.wma) 2 indices, index0 (150) not provided original disc pos #0 + 33844 (33844) = #33844/7:31.19 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 33844 blocks [RW-481248] 2: TRM_AUDIO_NOPRE (05 Translation.wma) 2 indices, index0 (150) not provided original disc pos #0 + 17302 (17302) = #17302/3:50.52 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 17302 blocks [RW-481248] 3: TRM_AUDIO_NOPRE (11 The Message of Jesus and all the prophets.wma) 2 indices, index0 (150) not provided original disc pos #0 + 22005 (22005) = #22005/4:53.30 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 22005 blocks [RW-481248] 4: TRM_AUDIO_NOPRE (13 The Birth of Jesus.wma) 2 indices, index0 (150) not provided original disc pos #0 + 55104 (55104) = #55104/12:14.54 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 55104 blocks [RW-481248] -------------------------------------------------------------- 21:05:12 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [RW-481248] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 5: 1: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 0 352800 55460160, ISRC "" 2: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 55460160 55812960 135414048, ISRC "" 3: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 135414048 135766848 176461152, ISRC "" 4: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 176461152 176813952 228569712, ISRC "" 5: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 228569712 228922512 358527120, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x01 | 0x00 -150 | 1 | 0 | 0x21 | 0x00 0 | 1 | 1 | 0x21 | 0x00 23430 | 2 | 0 | 0x21 | 0x00 23580 | 2 | 1 | 0x21 | 0x00 57424 | 3 | 0 | 0x21 | 0x00 57574 | 3 | 1 | 0x21 | 0x00 74876 | 4 | 0 | 0x21 | 0x00 75026 | 4 | 1 | 0x21 | 0x00 97031 | 5 | 0 | 0x21 | 0x00 97181 | 5 | 1 | 0x21 | 0x00 152285 | lead-out | 1 | 0x01 | 0x00 21:05:12 #13 Phase 28 File dlgbrnst.cpp, Line 1832 Speed measurement started 21:05:12 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0 21:05:12 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #23580 21:05:12 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #57574 21:05:12 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #0): write at #75026 21:05:12 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 4 (relocatable, no disc pos, no patch infos, orig at #0): write at #97181 21:06:16 #19 Text 0 File WriterStatus.cpp, Line 116 < RW-481248 > start writing Lead-Out at LBA 152285 (252DDh), lenght 0 blocks 21:06:16 #20 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 21:06:16 #21 Phase 29 File dlgbrnst.cpp, Line 1781 Speed measurement completed: 38.5x (5,784 KB/s) 21:06:16 #22 Text 0 File Burncd.cpp, Line 4186 Can only write at 32x instead of 40x, because speed of source data is too slow 21:06:16 #23 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 32x (4,800 KB/s) 21:06:16 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0 21:06:16 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #23580 21:06:16 #26 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #57574 21:06:16 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #0): write at #75026 21:06:16 #28 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 4 (relocatable, no disc pos, no patch infos, orig at #0): write at #97181 21:06:16 #29 Text 0 File Mmc.cpp, Line 16922 StartDAO : CD-Text - On 21:06:16 #30 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Super Link -> ON , Adapt writespeed to disc : ON 21:06:16 #31 Text 0 File Mmc.cpp, Line 17211 CueData, Len=96 21 00 00 41 00 00 00 00 21 01 00 00 00 00 00 00 21 01 01 00 00 00 02 00 21 02 00 00 00 05 0e 1e 21 02 01 00 00 05 10 1e 21 03 00 00 00 0c 2f 31 21 03 01 00 00 0c 31 31 21 04 00 00 00 10 28 1a 21 04 01 00 00 10 2a 1a 21 05 00 00 00 15 23 38 21 05 01 00 00 15 25 38 01 aa 01 01 00 21 34 23 21:07:01 #32 SCSI -1135 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03CB5400 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x0C 0x00 21:07:04 #33 SCSI -1066 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0AC90000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x36 0xD8 0x00 0x00 0x1B 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 0x00 0x24 0x00 21:07:04 #34 CDR -1135 File Writer.cpp, Line 311 Write error RW-481248\H2 T0 21:07:04 #35 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 21:07:05 #36 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 21:07:05 #37 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 32x (4,800 KB/s) 21:07:05 #38 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 21:07:05 #39 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 20/07/2005 22:20:27 File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 20/07/2005 22:20:27 Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) AfterDawn.com | AfterDawn.com Forums | Filepedia.com | MP3Lizard.com | DVD X Copy Forums | Blasteroids.com | Advertise on our sites © 1999-2005 AfterDawn.com. Rules, restrictions and privacy policy.
abideen Here's a few things: Need to get these drives back in DMA mode - here's a link for help: http://home.comcast.net/~bbmayo/checking DMA.pdf Wow! Not a heck of alot of free memory. Make sure you are not multi tasking and shut down some processes. Means your drive doesn't like the media. No experience w/ Moser Baer - unsure of the quality. Your firmware may need updating and this may take care of the problem. I'm unable to find your drive at http://forum.rpc1.org/dl_all.php so you'll need to check the manufacturers website. I'd also slow the burn speed down a bit from 32x. Oh and watch multi posting the same post in 3 different forums - frowned on.
ugh, i couldn't find anything on this burner either, must be very obscure. ps have requested the other 2 threads be closed (multiposts), it's against forum rules.
@creaky Lately if they just have a cd combo or cd writer only I'm unable to find anything on them - esp generic names. The firmware page doesn't seem to have as many firmware updates on these drives. Glad I'm not the only having trouble finding some!
@binkie7 - yeah, even a google search didn't come back with anything useful (or legible!). @abideen - just noticed that you've got Roxio installed - - uninstall that and you may need Roxio Zapper to fully get rid of it; Roxio and Nero don't tend to play well together...
sorry about the multi posting didnt know the rules. 1) i have the drives on DMA mode 2) iv shut down all the processes i could but now the memory shows less the before, why is that? 3) iv found a driver update should i install it ? http://info.ultima.com.tw/fae/Service_e/software download/Download_fw_e.htm 4)Roxie burner is showing but cant find the program anywhere to unistall it, it dosent even show it in the windows media plug in. tried the zapper, it says " burner engine has been detected and may be used by other roxio products. do you think its better to get anoither writer?
