Replay Lite

You will not be able to buy Replay Lites with 910 on them you will have to flash them yourself. Try skywonder or bubbleboxes, somewhere like that.

The channels are up to the service provider, you can't currently get those channels in dublin as far as i know.

 

Hi,smoke came out of my relay box,on opening up the box i looked at the caps and noticed that the,E4andE2caps have blowen can this be fixed,THANKS.

 

Cheers Evastar thanks for your help.

Keep up the good work guys and gals.

GerBhoy

 

Hey all

Regarding my query on page 231, thanks foe the replies Evastar and Brian1956. have tried your suggestions but the problem seems to be that even though the green light on the box stays on constantly, my comp thinks its turned off. So I cant try to start the download at all, as i cant make any connection through the stb link. It keeps telling me to turn my box on. is there a way of starting the download in this situation?

Would appreciate any help given

thanks guys

theshev77

 

Are you 100% sure that you have a null modem cable, not just an ordinary female to female 9 pin cable?

Plus what is on your pc, XP or vista?

 

Brain1956, Evastar, checked out my Replay Lite over the past few days and some channels were still freezing and breaking up. Then I noticed on these channels that the freq's were not the same as my fully working Starview. Manulay changed them to match and all up and running. Final question: is it ok to save the data as per page 222 of this thread? Thanks for all the help.

 

hi all, can someone help me? i am a newbie on this site... i'm a ntl customer in dublin and receive my signal through a dish, i have got a replay lite box, but when i set it up i get nothing... how do i set it up or tune the channels in? also how do i get into the secret menu? as i say i am new to this stuff and was hoping to get all the sky sports and movie channels... thanks in advance.

 

I am not into the replay at all but will try and give youa dig out,
When you say you get your signal through a dish, do you mean MMDS were abouts in Dublin are you?

 

cheers.. rush & ntl supply a digi signal through a dish on the side of the house

 

Ok the the best thing for you to do is go to the previous page and 12 posts down you will see how to update what you need,Try this and see, if not Eva or one of the replay heads might be around later, meanwhile try that and see if you get sorted!!!

 

@GERA27, do you get any channels at all, even the free to air ones?

Try doing an auto scan on 6887, see what channels you get.

 

yeah but i think they wont work thre eva im open to be shot down here but i dont think replays work there

 

Hi moggs, where have you been hiding yourself?!!

I was wondering about that myself, but he says he's n*l not chor*s, so if he is it should work.

 

just hiding from the ressision lol
well i think it wont work either way

 

Hi moggs, as far as i know the replay lite will work on n*l mmds, n*l true cable, chor*s true cable but not on chor*s mmds.

So he needs to find out exactly what he has.

I'm sure scouser knows better than me though, north co dublin is a bit of a dodgy area!

 

well im sure he knows alrigth but i 98.999997% sure it wont work lol

 

Well moggs, all i know is that i don't know, so we'll wait and see! LOL!

 

its always good to know what you dont know lmao

 

As Eva say's make sure you are using a null modem lead Part Number L71BT

Then do this,


Connect the Null modem lead from your box to your PC.

Open up the Stblink and select "Run"

DON'T do the Setup Comm.

Untick the "Maintain User Data" box.

Ignore the error message you will receive.

Select "Upgrade Software" and get the 742A file.

It will then start to transfer to you box.

When your PC reads "Transfer Complete" WAIT another couple of minutes before unplugging.

When the files are being transferred from your PC to the box, the led on the box will be flashing at this speed

DON'T unplug the box until until you see it flashing at this speed


When the flash is complete, unplug the box, null modem lead and exit the Stblink.

Power up the box again and WAIT until the light on the front goes Green.

Then do the above with the 910 file.

Then do your Auto Search.