I have been burning dvd's fine for a few months, using dvd shrink and then nero express to burn, but a couple days ago I started getting errors part way through the burning process. I unistalled nero and installed the latest edition, and the same problem, I unistalled nero again and installed cdburnxp, and the same problems. any ideas? The media I am using isn't great, but I burned about 70 of the same type before the problems began.
tripps11 Sounds like a media problem. Poor media can be hit or miss when burning. Make sure your firmware is up to date and burn at 4x. What media are you using? If you still have Nero see if there is a log in crogram files>ahead>nero>nero history. txt. If so post the last log and remember to remove the serail #'s - they begin w/ 1A.
I reinstalled the new version of nero, and tried to burn at 4x and it said the burn was successful, but I can't get the disk to play in any dvd player or my computer. I will post the log, but I am pretty computer iliterate and don't know where to find it. So if you can tell me where to find it I will be happy to post it. Thanks
Go to my computer>c drive. The log will be located here: Crogram files>ahead>nero>nero history txt. Just open the text file and copy and paste the last log. Remember edit out your serial # (don't need someone else using it!). It will begin w/ 1A and have a bunch of #'s.
Here is one that had errors. I use decrypter if needed and that works fine, the errors only occur when it is burning. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 4:33:44 PM Nero API version: 6.3.1.28 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <PIONEER DVD-RW DVR-K14> Version: 1.14 - HA 1 TA 0 - 6.3.1.28 Adapter driver: <atapi> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : FUJITSU MHT2060AT PL atapi Port 0 ID 0 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-K14 atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-K14 D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 70254592 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 478MB (489904kB) Free physical memory: 82MB (84464kB) Memory in use : 82 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 16.9.2005 NeroAPI 11:09:10 PM #1 Phase 112 File APIProgress.cpp, Line 273 DVD-Video files reallocation started 11:09:10 PM #2 Phase 114 File APIProgress.cpp, Line 273 DVD-Video files reallocation completed (no file modified) 11:09:10 PM #3 Phase 111 File APIProgress.cpp, Line 273 DVD-Video files sorted 11:09:10 PM #4 Text 0 File Reader.cpp, Line 126 Reader running 11:09:10 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 11:09:10 PM #6 Text 0 File Writer.cpp, Line 124 Writer PIONEER DVD-RW DVR-K14 running 11:09:10 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 11:09:10 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 11:09:10 PM #9 Text 0 File Burncd.cpp, Line 3152 Turn on Disc-At-Once, using DVD media 11:10:34 PM #10 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286175 (508:02.25, 4465MB) 11:10:34 PM #11 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO 11:10:34 PM #12 Text 0 File DlgWaitCD.cpp, Line 2161 Recorder: PIONEER DVD-RW DVR-K14, Media type: DVD-R Disc Manufacturer: TYG02 - Disc Application Code: 64, Disc Physical Code: 193 11:10:34 PM #13 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= Compilation cannot be written on that medium type. (Medium in drive: DVD-ROM. Medium required by compilation: DVD+R/RW, DVD-R/RW.) 11:10:34 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2286176 (2286176) = #2286176/508:2.26 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286176 blocks [PIONEER DVD-RW DVR-K14 ] -------------------------------------------------------------- 11:10:34 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [PIONEER DVD-RW DVR-K14 ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682088448, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2286176 | lead-out | 1 | 0x00 | 0x41 11:10:35 PM #16 Phase 24 File APIProgress.cpp, Line 273 Caching of files started 11:10:35 PM #17 Text 0 File Burncd.cpp, Line 4163 Cache writing successful. 11:10:35 PM #18 Phase 25 File APIProgress.cpp, Line 273 Caching of files completed 11:10:35 PM #19 Phase 36 File APIProgress.cpp, Line 273 Burn process started at 8x (11,080 KB/s) 11:10:35 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:10:35 PM #21 Text 0 File DVDR.cpp, Line 2135 Recording mode: Sequential Recording Mode 11:10:35 PM #22 Text 0 File Mmc.cpp, Line 20857 Set BUFE: supported -> ON 11:10:35 PM #23 Text 0 File DVDR.cpp, Line 2276 Start write address at LBA 0 DVD high compatibility mode: Yes 11:10:35 PM #24 Text 0 File Cdrdrv.cpp, Line 8219 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:40:06 PM #25 SCSI -1135 File Cdrdrv.cpp, Line 1444 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x016F0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x1D 0x68 0xE0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x24 0xFF 0x1B 0x0E 0x00 0x00 0x00 0x00 0x0C 0x00 11:40:06 PM #26 CDR -1135 File Writer.cpp, Line 304 Write error 11:40:06 PM #27 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 11:40:06 PM #28 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 11:40:06 PM #29 Text 0 File DVDR.cpp, Line 2519 EndDAO: Last written address was 1927391 11:40:06 PM #30 Phase 38 File APIProgress.cpp, Line 273 Burn process failed at 8x (11,080 KB/s) 11:40:06 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 828 DRM: DRM burn session terminated. 11:40:06 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 857 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 11/20/2004 3:39:26 AM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 2, 12, 1, size=91136 bytes, created 9/7/2004 3:27:22 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 2, 12, 1, size=28544 bytes, created 9/7/2004 3:27:38 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 2, 12, 1, size=5760 bytes, created 9/7/2004 3:29:08 PM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) [16.09.2005]------------------------------------ 23:09:10 Robot error messages from: ====== *** NeroAPI, History File *** ======
Version: 1.14 - HA 1 TA 0 - 6.3.1.28 - Nero version bit old - update PIONEER DVD-RW DVR-K14 atapi Port 1 ID 0 DMA: Off - you need to enable DMA ------------------------------------------- Physical memory : 478MB (489904kB) Free physical memory: 82MB (84464kB) Memory in use : 82 % You need to close down some of your background programs -------------------------------------------- Compilation cannot be written on that medium type. (Medium in drive: DVD-ROM. Medium required by compilation: DVD+R/RW, DVD-R/RW.) You appear to be using incorrect media -------------------------------------------- Burn process failed at 8x (11,080 KB/s) Attempting to burn too fast - try 4X -------------------------------------------- File 'Drivers\InCDfs.SYS': Ver=4, 2, 12, 1, size=91136 bytes, created 9/7/2004 3:27:22 PM (InCD4 driver for win NT/2K/XP) Disable or remove INCD from your system - it is packet writing software that can interfere with other burning programs
I installed the new version of nerorecode and burned at 4x and it said it was successful, but I can not get the disk to play in any dvd player and also not in my computer, here is the log ********** Nero Recode 2 CE ********** Version: 2.2.6.17 Owner Project type: Main Movie to Nero Digital Target size: DVD5 (2282925) 10:13:47 File LangStreamPatcher.cpp, Line 56 Command table patching started... 10:13:47 File LangStreamPatcher.cpp, Line 133 All tables successfully patched! Burn settings: Target: PIONEER DVD-RW DVR-K14 Number of copies: 1 Write speed: 5540 KB/s Temp folder: C:\Documents and Settings\Owner\My Documents\dvds (21967048704 bytes free) Direct burning: false Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL NeroDigital profile: Standard Shutdown when finished: false Advanced Analysis: false Compress Adaptive: false 10:15:06 File burn_ndigital.cpp, Line 158 NeroDigital: init 10:15:07 File NeroRecorderBase.cpp, Line 488 Writing to disc: DVD-R 10:15:07 File NeroRecorderBase.cpp, Line 502 Free capacity on disc: 2292150 sectors (2298496) 10:15:07 File burn_ndigital.cpp, Line 269 NeroDigital: burning 2292150 sectors (1370586 required) 10:15:07 File burn_ndigital.cpp, Line 301 NeroDigital: Adjusting target size 10:15:07 File burn_ndigital.cpp, Line 343 NeroDigital: beginning 1st-pass operation 10:15:07 File burn_ndigital.cpp, Line 697 NeroDigital: encode dvds Source: Size (720,480) Display Aspect Ratio (16,9) Deinterlace disabled Cropping enabled (2, 4, 2, 8) Resizing enabled (720,384) Pixel ratio (1,1) Bitrate: 4000000 bps 10:15:07 File burn_ndigital.cpp, Line 722 Nth-pass file = C:\DOCUME~1\Owner\LOCALS~1\Temp\\dvdsa01384.bin 10:15:07 File burn_ndigital.cpp, Line 1192 NeroDigital: building graph Audio channels = 2 Profile = 4 Bitrate = 80 RCmode = 2 Sampling rate = 44100 10:15:10 File burn_ndigital.cpp, Line 924 NeroDigital: waiting for graph to complete 11:22:47 File burn_ndigital.cpp, Line 1018 graph completed successfully 11:22:48 File burn_ndigital.cpp, Line 391 NeroDigital: finished 1st-pass 11:22:48 File burn_ndigital.cpp, Line 407 NeroDigital: 0 files require 2nd pass 11:22:48 File burn_ndigital.cpp, Line 480 NeroDigital: beginning 2nd-pass operation 11:22:48 File burn_ndigital.cpp, Line 527 NeroDigital: Compiling volume completed successfully 11:22:48 File burn_ndigital.cpp, Line 557 NeroDigital: begin burn operation 11:22:48 File NeroRecorderBase.cpp, Line 1096 Burning 1 files with total size of 1989722834 bytes on hard disk 1A2X-C701-4000-2394-3695-4066 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero Recode\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.16 Using interface version: 6.6.0.9 Installed in: C:\Program Files\Ahead\Nero Recode\NeroFiles\ Application: Ahead\Nero Recode Internal Version: 6, 6, 0, 16b Recorder: <PIONEER DVD-RW DVR-K14> Version: 1.14 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : FUJITSU MHT2060AT PL atapi Port 0 ID 0 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-K14 atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-K14 D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 70254592 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 478MB (489904kB) Free physical memory: 273MB (280264kB) Memory in use : 42 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 19.9.2005 NeroAPI 11:22:48 AM #1 Text 0 File Reader.cpp, Line 127 Reader running 11:22:48 AM #2 Text 0 File Writer.cpp, Line 122 Writer PIONEER DVD-RW DVR-K14 running 11:22:48 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 11:22:48 AM #4 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 11:22:48 AM #5 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 971727 (215:56.27, 1897MB) 11:22:48 AM #6 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 11:22:48 AM #7 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: PIONEER DVD-RW DVR-K14, Media type: DVD-R Disc Manufacturer: TYG02 - Disc Application Code: 64, Disc Physical Code: 193 11:22:48 AM #8 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:22:48 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 971728 (971728) = #971728/215:56.28 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 971728 blocks [PIONEER DVD-RW DVR-K14] -------------------------------------------------------------- 11:22:48 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [PIONEER DVD-RW DVR-K14] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1990098944, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 971728 | lead-out | 1 | 0x41 | 0x00 11:22:48 AM #11 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 11:22:48 AM #12 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 11:22:48 AM #13 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 11:22:48 AM #14 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 4x (5,540 KB/s) 11:22:49 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:22:49 AM #16 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode for Multisession 11:22:49 AM #17 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Buffer underrun protection -> ON 11:22:49 AM #18 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 0 DVD high compatibility mode: No 11:22:49 AM #19 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:35:54 AM #20 Text 0 File WriterStatus.cpp, Line 116 <PIONEER DVD-RW DVR-K14 > start writing Lead-Out at LBA 971728 (ED3D0h), lenght 0 blocks 11:35:54 AM #21 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:35:54 AM #22 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 971727 11:35:57 AM #23 Phase 133 File APIProgress.cpp, Line 276 Writing short lead-out 11:37:19 AM #24 Phase 37 File APIProgress.cpp, Line 276 Burn process completed successfully at 4x (5,540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 11/20/2004 3:39:26 AM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 2, 12, 1, size=91136 bytes, created 9/7/2004 3:27:22 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 2, 12, 1, size=28544 bytes, created 9/7/2004 3:27:38 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 2, 12, 1, size=5760 bytes, created 9/7/2004 3:29:08 PM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 11:37:26 File burn_ndigital.cpp, Line 200 NeroDigital: exit
I went ahead and got rid of incd, and ordered new media (verbatim) I don't know how to enable the dma (still learning as I go)so if you could help me with that I would appreciate it.
I also just tried to burn a cd, and the drive won't read the cd, it is a burned cd, but I have burned off of burned cds before. I just feel lost right now.
tripps11, Steps to change to DMA. These are instructions for Win2k or WinXp, they are very similar. 1.right click on My Computer 2.select manage 3.select Device Manager 4.select the + sign next IDE ATA/ATAPI CONTROLLERS 5.assuming your DVD/CD's are on Secondary IDE Channel, double click it 8.select Advanced settings 9.select pull-down menu on Transfer mode 10.select DMA 11.click on OK 12.done Best of luck, Rich
@tripps11, Seems like you have had a lot of help and great advice. I would definitley check your media...At the beginning of backing up dvds, I used cheap media and thought everything was fine, but it wasn't and I quickly learned fro the team at AD and now after 1000 backups I use Genuine Taiyo Yudens, Verbatims, Maxell, FuJI's and Sony's all from Japan. I never burn faster than 4x but at times the Sony external DL will allow the Verbs and Sony's to burn at 6x or 8x, so I have burned a few at 6x with not one problem...played flawlessly, but I do not encourage that. Try some new media and see how that works...also if it is +R have Nero, Decrypter Booktype the media to Dvd Rom (allows it to play in a wider range of dvd stand alones). MovieDud
I have several DVD's on my hard drive (E:\). I bought a DVD-R to transfer them to. I have used DVD shrink, nero, DVD Decrypter, firestorm, and smartripper and for all they say that their is "no disc in drive". I don't know what to do. They work when i put in cd's. Can someone please help me. Thanks
I take it you have attempted several DVD discs, and if so have you attempted to view any of them via Windows Explorer, or My Computer? Good luck, Rich
i would like to know if I can burn on my hp pavillion. Where the cd-rom is, it says "hp cd writer/ dvd" Please someone help me I am new to this whole thing. I have some movie on my c:\
i would like to know if I can burn on my hp. Where the cd-rom is, it says "hp cd writer/ dvd" Please someone help me I am new to this whole thing. I have some movie on my c:\
