1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Nero 6.6.0.16 - Perfect CD burns but "clicky" playback

Discussion in 'Nero discussion' started by CrazyNW, Oct 1, 2005.

  1. CrazyNW

    CrazyNW Member

    Joined:
    Oct 1, 2005
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    Ever since upgrading to Nero 6.6.0.16 my CD-R discs seem to burn perfectly but when I play them back in my Technics CD player they click and pop. Not a lot but enough for them to be unusable.

    This problem ONLY seems to occur when copying discs directly in Nero Express, burning from the hard disc in Nero Burning Rom seems to be okay.

    I've tried two burners:

    Matshita SW-9571 and
    LG GSA-4163B

    I'm using genuine Taiyo Yuden CDs.

    I rolled back to Nero 6.3.1.25 (cleaning with Nero Clean Tool) and the popping continued. I put 6.6.0.16 back. Same problem. Today I went back to 6.3.1.25 and the popping seems to have stopped. It's just weird.

    Does anybody know what might be causing these digital pops and why Nero isn't registering them? Could another piece of software (DVD Shrink, etc) be causing some conflict? Is there any way to fix it?

    Thanks!

    John
     
    Last edited: Oct 1, 2005
  2. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    hi. could be a setting needs tweaking. post LAST section of your logfile which lives in c:\program files\ahead\nero\nerohistory.log, but DO NOT post your serial number which usually begins with '1A21' or similar
     
  3. CrazyNW

    CrazyNW Member

    Joined:
    Oct 1, 2005
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    Hi, thanks for fast response! I'm not sure exactly which bit you need so I've copied my entire logfile (without registration key number) below.

    I'd be VERY grateful for any/all suggestions :)


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 17:33:44
    Nero version: 6.3.1.25 (Nero Express)
    Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 0 TA 2 - 6.3.1.25
    Adapter driver: <nvatabus> HA 0
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <TOSHIBA DVD-ROM SD-M1712>Version: 1004 - HA 0 TA 1 - 6.3.1.25
    Adapter driver: <nvatabus> HA 0

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y120L0 nvatabus Port 0 ID 0 DMA: Off
    CdRomPeripheral : TOSHIBA DVD-ROM SD-M1712 nvatabus Port 0 ID 1 DMA: Off
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B nvatabus Port 0 ID 2 DMA: Off
    DiskPeripheral : IOMEGA ZIP 250 nvatabus Port 0 ID 3 DMA: Off

    === CDRom-Device-Map ===
    TOSHIBA DVD-ROM SD-M1712 G: CDRom0
    HL-DT-ST DVDRAM GSA-4163 H: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 168MB (172768kB)
    Memory in use : 67 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    1.10.2005
    CD Copy
    16:24:14 #1 Phase 90 File dlgbrnst.cpp, Line 1855
    Buffer Underrun Protection activated

    16:24:14 #2 Text 0 File Reader.cpp, Line 126
    Reader running

    16:24:14 #3 Text 0 File Writer.cpp, Line 124
    Writer HL-DT-ST DVDRAM GSA-4163B running

    16:24:14 #4 Phase 48 File dlgbrnst.cpp, Line 1855
    Analyzing disc

    16:24:14 #5 CDCOPY -1 File CDCopy.cpp, Line 1896
    The CD is copyrighted

    16:24:17 #6 Text 0 File CDCopy.cpp, Line 2116
    _Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
    Track 1: 0 0 ( 0:02.00) 17699 17698 ( 3:57.73)
    Track 2: 17699 17699 ( 3:57.74) 32009 32008 ( 7:08.58)
    Track 3: 32009 32009 ( 7:08.59) 41783 41782 ( 9:19.07)
    Track 4: 41783 41783 ( 9:19.08) 56416 56415 ( 12:34.15)
    Track 5: 56416 56416 ( 12:34.16) 65965 65964 ( 14:41.39)
    Track 6: 65965 65965 ( 14:41.40) 81050 81049 ( 18:02.49)
    Track 7: 81050 81050 ( 18:02.50) 93245 93244 ( 20:45.19)
    Track 8: 93245 93245 ( 20:45.20) 116164 116163 ( 25:50.63)
    Track 9: 116164 116164 ( 25:50.64) 127076 127075 ( 28:16.25)
    Track 10: 127076 127076 ( 28:16.26) 142919 142918 ( 31:47.43)

    16:24:17 #7 Text 0 File CDCopy.cpp, Line 840
    Copy options: copy on-the-fly: ON
    read ISRC/MCN: OFF
    use jitter correction: OFF
    data options
    ignore read error: ON write defekt blocks OFF
    read raw data: OFF read r-w subchannel data: OFF
    audio options
    ignore read error: ON
    read indexes: OFF read r-w subchannel data: OFF
    source disc does not look like CD Extra
    01. 0 - 17699 = 17699, audio (TRM_AUDIO_NOPRE, block size 2352)
    02. 17699 - 32009 = 14310, audio (TRM_AUDIO_NOPRE, block size 2352)
    03. 32009 - 41783 = 9774, audio (TRM_AUDIO_NOPRE, block size 2352)
    04. 41783 - 56416 = 14633, audio (TRM_AUDIO_NOPRE, block size 2352)
    05. 56416 - 65965 = 9549, audio (TRM_AUDIO_NOPRE, block size 2352)
    06. 65965 - 81050 = 15085, audio (TRM_AUDIO_NOPRE, block size 2352)
    07. 81050 - 93245 = 12195, audio (TRM_AUDIO_NOPRE, block size 2352)
    08. 93245 - 116164 = 22919, audio (TRM_AUDIO_NOPRE, block size 2352)
    09. 116164 - 127076 = 10912, audio (TRM_AUDIO_NOPRE, block size 2352)
    10. 127076 - 142919 = 15843, audio (TRM_AUDIO_NOPRE, block size 2352)

    16:24:21 #8 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-at-once, using CD-R/RW media

    16:24:22 #9 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 359846 ( 79:59.71)
    Last address to be written: 142918 ( 31:47.43)

    16:24:22 #10 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    16:24:22 #11 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: HL-DT-ST DVDRAM GSA-4163B;
    CDR code: 00 97 24 01; OSJ entry from: Taiyo Yuden Company Limited
    ATIP Data:
    Special Info [hex] 1: C0 00 98, 2: 61 18 01 (LI 97:24.01), 3: 4F 3B 48 (LO 79:59.72)
    Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

    16:24:22 #12 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    16:24:22 #13 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_AUDIO_NOPRE (1 - Audio)
    2 indices, index0 (150) not provided
    original disc pos #0 + 17699 (17699) = #17699/3:55.74
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 17699 blocks [HL-DT-ST DVDRAM GSA-4163B]
    1: TRM_AUDIO_NOPRE (2 - Audio)
    2 indices, index0 (0) provided
    original disc pos #17699 + 14310 (14310) = #32009/7:6.59
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 14310 blocks [HL-DT-ST DVDRAM GSA-4163B]
    2: TRM_AUDIO_NOPRE (3 - Audio)
    2 indices, index0 (0) provided
    original disc pos #32009 + 9774 (9774) = #41783/9:17.8
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 9774 blocks [HL-DT-ST DVDRAM GSA-4163B]
    3: TRM_AUDIO_NOPRE (4 - Audio)
    2 indices, index0 (0) provided
    original disc pos #41783 + 14633 (14633) = #56416/12:32.16
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 14633 blocks [HL-DT-ST DVDRAM GSA-4163B]
    4: TRM_AUDIO_NOPRE (5 - Audio)
    2 indices, index0 (0) provided
    original disc pos #56416 + 9549 (9549) = #65965/14:39.40
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 9549 blocks [HL-DT-ST DVDRAM GSA-4163B]
    5: TRM_AUDIO_NOPRE (6 - Audio)
    2 indices, index0 (0) provided
    original disc pos #65965 + 15085 (15085) = #81050/18:0.50
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 15085 blocks [HL-DT-ST DVDRAM GSA-4163B]
    6: TRM_AUDIO_NOPRE (7 - Audio)
    2 indices, index0 (0) provided
    original disc pos #81050 + 12195 (12195) = #93245/20:43.20
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 12195 blocks [HL-DT-ST DVDRAM GSA-4163B]
    7: TRM_AUDIO_NOPRE (8 - Audio)
    2 indices, index0 (0) provided
    original disc pos #93245 + 22919 (22919) = #116164/25:48.64
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 22919 blocks [HL-DT-ST DVDRAM GSA-4163B]
    8: TRM_AUDIO_NOPRE (9 - Audio)
    2 indices, index0 (0) provided
    original disc pos #116164 + 10912 (10912) = #127076/28:14.26
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 10912 blocks [HL-DT-ST DVDRAM GSA-4163B]
    9: TRM_AUDIO_NOPRE (10 - Audio)
    2 indices, index0 (0) provided
    original disc pos #127076 + 15843 (15843) = #142919/31:45.44
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 15843 blocks [HL-DT-ST DVDRAM GSA-4163B]
    --------------------------------------------------------------

    16:24:22 #14 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 10:
    1: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 0 352800 41980848, ISRC ""
    2: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 41980848 41980848 75637968, ISRC ""
    3: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 75637968 75637968 98626416, ISRC ""
    4: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 98626416 98626416 133043232, ISRC ""
    5: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 133043232 133043232 155502480, ISRC ""
    6: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 155502480 155502480 190982400, ISRC ""
    7: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 190982400 190982400 219665040, ISRC ""
    8: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 219665040 219665040 273570528, ISRC ""
    9: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 273570528 273570528 299235552, ISRC ""
    10: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 299235552 299235552 336498288, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    -150 | lead-in | 0 | 0x00 | 0x01
    -150 | 1 | 0 | 0x00 | 0x01
    0 | 1 | 1 | 0x00 | 0x01
    17699 | 2 | 0 | 0x00 | 0x01
    17699 | 2 | 1 | 0x00 | 0x01
    32009 | 3 | 0 | 0x00 | 0x01
    32009 | 3 | 1 | 0x00 | 0x01
    41783 | 4 | 0 | 0x00 | 0x01
    41783 | 4 | 1 | 0x00 | 0x01
    56416 | 5 | 0 | 0x00 | 0x01
    56416 | 5 | 1 | 0x00 | 0x01
    65965 | 6 | 0 | 0x00 | 0x01
    65965 | 6 | 1 | 0x00 | 0x01
    81050 | 7 | 0 | 0x00 | 0x01
    81050 | 7 | 1 | 0x00 | 0x01
    93245 | 8 | 0 | 0x00 | 0x01
    93245 | 8 | 1 | 0x00 | 0x01
    116164 | 9 | 0 | 0x00 | 0x01
    116164 | 9 | 1 | 0x00 | 0x01
    127076 | 10 | 0 | 0x00 | 0x01
    127076 | 10 | 1 | 0x00 | 0x01
    142919 | lead-out | 1 | 0x00 | 0x01

    16:24:22 #15 Phase 36 File dlgbrnst.cpp, Line 1855
    Burn process started at 32x (4,800 KB/s)

    16:24:22 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

    16:24:22 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #17699): write at #17699

    16:24:22 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #32009): write at #32009

    16:24:22 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #41783): write at #41783

    16:24:22 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 4 (relocatable, no disc pos, no patch infos, orig at #56416): write at #56416

    16:24:22 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 5 (relocatable, no disc pos, no patch infos, orig at #65965): write at #65965

    16:24:22 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 6 (relocatable, no disc pos, no patch infos, orig at #81050): write at #81050

    16:24:22 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 7 (relocatable, no disc pos, no patch infos, orig at #93245): write at #93245

    16:24:22 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 8 (relocatable, no disc pos, no patch infos, orig at #116164): write at #116164

    16:24:22 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 9 (relocatable, no disc pos, no patch infos, orig at #127076): write at #127076

    16:24:22 #26 Text 0 File Mmc.cpp, Line 16040
    StartDAO : CD-Text - Off

    16:24:22 #27 Text 0 File Mmc.cpp, Line 20660
    Set BUFE: supported -> ON

    16:24:22 #28 Text 0 File Mmc.cpp, Line 16327
    CueData, Len=104
    01 00 00 01 00 00 00 00
    01 01 00 00 00 00 00 00
    01 01 01 00 00 00 02 00
    01 02 01 00 00 03 39 4a
    01 03 01 00 00 07 08 3b
    01 04 01 00 00 09 13 08
    01 05 01 00 00 0c 22 10
    01 06 01 00 00 0e 29 28
    01 07 01 00 00 12 02 32
    01 08 01 00 00 14 2d 14
    01 09 01 00 00 19 32 40
    01 0a 01 00 00 1c 10 1a
    01 aa 01 01 00 1f 2f 2c

    16:24:58 #29 Text 0 File Cdrdrv.cpp, Line 1297
    16:24:58.296 - HL-DT-ST DVDRAM GSA-4163B\H0 T2 : Queue again later

    16:26:40 #30 Text 0 File WriterStatus.cpp, Line 115
    <HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 142919 (22E47h), lenght 0 blocks

    16:26:45 #31 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    16:26:45 #32 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    16:26:45 #33 Phase 37 File dlgbrnst.cpp, Line 1855
    Burn process completed successfully at 32x (4,800 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 19/05/2004 12:33:44 (Prassi/Veritas driver for win 2K)
    File 'Drivers\nvatabus.sys': Ver=5.10.2600.0446 built by: WinDDK, size=79360 bytes, created 03/06/2004 11:40:46 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 17:33:44
    Nero version: 6.3.1.25 (Nero Express)
    Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 0 TA 2 - 6.3.1.25
    Adapter driver: <nvatabus> HA 0
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <TOSHIBA DVD-ROM SD-M1712>Version: 1004 - HA 0 TA 1 - 6.3.1.25
    Adapter driver: <nvatabus> HA 0

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y120L0 nvatabus Port 0 ID 0 DMA: Off
    CdRomPeripheral : TOSHIBA DVD-ROM SD-M1712 nvatabus Port 0 ID 1 DMA: Off
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B nvatabus Port 0 ID 2 DMA: Off
    DiskPeripheral : IOMEGA ZIP 250 nvatabus Port 0 ID 3 DMA: Off

    === CDRom-Device-Map ===
    TOSHIBA DVD-ROM SD-M1712 G: CDRom0
    HL-DT-ST DVDRAM GSA-4163 H: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 97MB (99752kB)
    Memory in use : 80 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    1.10.2005
    CD Copy
    17:06:42 #1 Phase 90 File dlgbrnst.cpp, Line 1855
    Buffer Underrun Protection activated

    17:06:42 #2 Text 0 File Reader.cpp, Line 126
    Reader running

    17:06:42 #3 Text 0 File Writer.cpp, Line 124
    Writer HL-DT-ST DVDRAM GSA-4163B running

    17:06:42 #4 Phase 48 File dlgbrnst.cpp, Line 1855
    Analyzing disc

    17:06:42 #5 CDCOPY -1 File CDCopy.cpp, Line 1896
    The CD is copyrighted

    17:06:46 #6 Text 0 File CDCopy.cpp, Line 2116
    _Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
    Track 1: 0 0 ( 0:02.00) 12026 12025 ( 2:42.25)
    Track 2: 12026 12026 ( 2:42.26) 21163 21162 ( 4:44.12)
    Track 3: 21163 21163 ( 4:44.13) 34930 34929 ( 7:47.54)
    Track 4: 34930 34930 ( 7:47.55) 40542 40541 ( 9:02.41)
    Track 5: 40542 40542 ( 9:02.42) 44874 44873 ( 10:00.23)
    Track 6: 44874 44874 ( 10:00.24) 52222 52221 ( 11:38.21)
    Track 7: 52222 52222 ( 11:38.22) 59912 59911 ( 13:20.61)
    Track 8: 59912 59912 ( 13:20.62) 71989 71988 ( 16:01.63)
    Track 9: 71989 71989 ( 16:01.64) 78318 78317 ( 17:26.17)
    Track 10: 78318 78318 ( 17:26.18) 86090 86089 ( 19:09.64)
    Track 11: 86090 86090 ( 19:09.65) 91720 91719 ( 20:24.69)
    Track 12: 91720 91720 ( 20:24.70) 100453 100452 ( 22:21.27)
    Track 13: 100453 100453 ( 22:21.28) 118414 118413 ( 26:20.63)
    Track 14: 118414 118414 ( 26:20.64) 123745 123744 ( 27:31.69)
    Track 15: 123745 123745 ( 27:31.70) 148184 148183 ( 32:57.58)
    Track 16: 148184 148184 ( 32:57.59) 165213 165212 ( 36:44.62)
    Track 17: 165213 165213 ( 36:44.63) 186766 186765 ( 41:32.15)

    17:06:46 #7 Text 0 File CDCopy.cpp, Line 840
    Copy options: copy on-the-fly: ON
    read ISRC/MCN: OFF
    use jitter correction: OFF
    data options
    ignore read error: ON write defekt blocks OFF
    read raw data: OFF read r-w subchannel data: OFF
    audio options
    ignore read error: ON
    read indexes: OFF read r-w subchannel data: OFF
    source disc does not look like CD Extra
    01. 0 - 12026 = 12026, audio (TRM_AUDIO_NOPRE, block size 2352)
    02. 12026 - 21163 = 9137, audio (TRM_AUDIO_NOPRE, block size 2352)
    03. 21163 - 34930 = 13767, audio (TRM_AUDIO_NOPRE, block size 2352)
    04. 34930 - 40542 = 5612, audio (TRM_AUDIO_NOPRE, block size 2352)
    05. 40542 - 44874 = 4332, audio (TRM_AUDIO_NOPRE, block size 2352)
    06. 44874 - 52222 = 7348, audio (TRM_AUDIO_NOPRE, block size 2352)
    07. 52222 - 59912 = 7690, audio (TRM_AUDIO_NOPRE, block size 2352)
    08. 59912 - 71989 = 12077, audio (TRM_AUDIO_NOPRE, block size 2352)
    09. 71989 - 78318 = 6329, audio (TRM_AUDIO_NOPRE, block size 2352)
    10. 78318 - 86090 = 7772, audio (TRM_AUDIO_NOPRE, block size 2352)
    11. 86090 - 91720 = 5630, audio (TRM_AUDIO_NOPRE, block size 2352)
    12. 91720 - 100453 = 8733, audio (TRM_AUDIO_NOPRE, block size 2352)
    13. 100453 - 118414 = 17961, audio (TRM_AUDIO_NOPRE, block size 2352)
    14. 118414 - 123745 = 5331, audio (TRM_AUDIO_NOPRE, block size 2352)
    15. 123745 - 148184 = 24439, audio (TRM_AUDIO_NOPRE, block size 2352)
    16. 148184 - 165213 = 17029, audio (TRM_AUDIO_NOPRE, block size 2352)
    17. 165213 - 186766 = 21553, audio (TRM_AUDIO_NOPRE, block size 2352)

    17:06:46 #8 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-at-once, using CD-R/RW media

    17:06:46 #9 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 359846 ( 79:59.71)
    Last address to be written: 186765 ( 41:32.15)

    17:06:46 #10 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    17:06:46 #11 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: HL-DT-ST DVDRAM GSA-4163B;
    CDR code: 00 97 24 01; OSJ entry from: Taiyo Yuden Company Limited
    ATIP Data:
    Special Info [hex] 1: C0 00 98, 2: 61 18 01 (LI 97:24.01), 3: 4F 3B 48 (LO 79:59.72)
    Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

    17:06:46 #12 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    17:06:46 #13 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_AUDIO_NOPRE (1 - Audio)
    2 indices, index0 (150) not provided
    original disc pos #0 + 12026 (12026) = #12026/2:40.26
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 12026 blocks [HL-DT-ST DVDRAM GSA-4163B]
    1: TRM_AUDIO_NOPRE (2 - Audio)
    2 indices, index0 (0) provided
    original disc pos #12026 + 9137 (9137) = #21163/4:42.13
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 9137 blocks [HL-DT-ST DVDRAM GSA-4163B]
    2: TRM_AUDIO_NOPRE (3 - Audio)
    2 indices, index0 (0) provided
    original disc pos #21163 + 13767 (13767) = #34930/7:45.55
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 13767 blocks [HL-DT-ST DVDRAM GSA-4163B]
    3: TRM_AUDIO_NOPRE (4 - Audio)
    2 indices, index0 (0) provided
    original disc pos #34930 + 5612 (5612) = #40542/9:0.42
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 5612 blocks [HL-DT-ST DVDRAM GSA-4163B]
    4: TRM_AUDIO_NOPRE (5 - Audio)
    2 indices, index0 (0) provided
    original disc pos #40542 + 4332 (4332) = #44874/9:58.24
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 4332 blocks [HL-DT-ST DVDRAM GSA-4163B]
    5: TRM_AUDIO_NOPRE (6 - Audio)
    2 indices, index0 (0) provided
    original disc pos #44874 + 7348 (7348) = #52222/11:36.22
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 7348 blocks [HL-DT-ST DVDRAM GSA-4163B]
    6: TRM_AUDIO_NOPRE (7 - Audio)
    2 indices, index0 (0) provided
    original disc pos #52222 + 7690 (7690) = #59912/13:18.62
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 7690 blocks [HL-DT-ST DVDRAM GSA-4163B]
    7: TRM_AUDIO_NOPRE (8 - Audio)
    2 indices, index0 (0) provided
    original disc pos #59912 + 12077 (12077) = #71989/15:59.64
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 12077 blocks [HL-DT-ST DVDRAM GSA-4163B]
    8: TRM_AUDIO_NOPRE (9 - Audio)
    2 indices, index0 (0) provided
    original disc pos #71989 + 6329 (6329) = #78318/17:24.18
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 6329 blocks [HL-DT-ST DVDRAM GSA-4163B]
    9: TRM_AUDIO_NOPRE (10 - Audio)
    2 indices, index0 (0) provided
    original disc pos #78318 + 7772 (7772) = #86090/19:7.65
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 7772 blocks [HL-DT-ST DVDRAM GSA-4163B]
    10: TRM_AUDIO_NOPRE (11 - Audio)
    2 indices, index0 (0) provided
    original disc pos #86090 + 5630 (5630) = #91720/20:22.70
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 5630 blocks [HL-DT-ST DVDRAM GSA-4163B]
    11: TRM_AUDIO_NOPRE (12 - Audio)
    2 indices, index0 (0) provided
    original disc pos #91720 + 8733 (8733) = #100453/22:19.28
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 8733 blocks [HL-DT-ST DVDRAM GSA-4163B]
    12: TRM_AUDIO_NOPRE (13 - Audio)
    2 indices, index0 (0) provided
    original disc pos #100453 + 17961 (17961) = #118414/26:18.64
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 17961 blocks [HL-DT-ST DVDRAM GSA-4163B]
    13: TRM_AUDIO_NOPRE (14 - Audio)
    2 indices, index0 (0) provided
    original disc pos #118414 + 5331 (5331) = #123745/27:29.70
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 5331 blocks [HL-DT-ST DVDRAM GSA-4163B]
    14: TRM_AUDIO_NOPRE (15 - Audio)
    2 indices, index0 (0) provided
    original disc pos #123745 + 24439 (24439) = #148184/32:55.59
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 24439 blocks [HL-DT-ST DVDRAM GSA-4163B]
    15: TRM_AUDIO_NOPRE (16 - Audio)
    2 indices, index0 (0) provided
    original disc pos #148184 + 17029 (17029) = #165213/36:42.63
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 17029 blocks [HL-DT-ST DVDRAM GSA-4163B]
    16: TRM_AUDIO_NOPRE (17 - Audio)
    2 indices, index0 (0) provided
    original disc pos #165213 + 21553 (21553) = #186766/41:30.16
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 21553 blocks [HL-DT-ST DVDRAM GSA-4163B]
    --------------------------------------------------------------

    17:06:46 #14 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 17:
    1: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 0 352800 28637952, ISRC ""
    2: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 28637952 28637952 50128176, ISRC ""
    3: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 50128176 50128176 82508160, ISRC ""
    4: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 82508160 82508160 95707584, ISRC ""
    5: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 95707584 95707584 105896448, ISRC ""
    6: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 105896448 105896448 123178944, ISRC ""
    7: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 123178944 123178944 141265824, ISRC ""
    8: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 141265824 141265824 169670928, ISRC ""
    9: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 169670928 169670928 184556736, ISRC ""
    10: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 184556736 184556736 202836480, ISRC ""
    11: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 202836480 202836480 216078240, ISRC ""
    12: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 216078240 216078240 236618256, ISRC ""
    13: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 236618256 236618256 278862528, ISRC ""
    14: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 278862528 278862528 291401040, ISRC ""
    15: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 291401040 291401040 348881568, ISRC ""
    16: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 348881568 348881568 388933776, ISRC ""
    17: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 388933776 388933776 439626432, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    -150 | lead-in | 0 | 0x00 | 0x01
    -150 | 1 | 0 | 0x00 | 0x01
    0 | 1 | 1 | 0x00 | 0x01
    12026 | 2 | 0 | 0x00 | 0x01
    12026 | 2 | 1 | 0x00 | 0x01
    21163 | 3 | 0 | 0x00 | 0x01
    21163 | 3 | 1 | 0x00 | 0x01
    34930 | 4 | 0 | 0x00 | 0x01
    34930 | 4 | 1 | 0x00 | 0x01
    40542 | 5 | 0 | 0x00 | 0x01
    40542 | 5 | 1 | 0x00 | 0x01
    44874 | 6 | 0 | 0x00 | 0x01
    44874 | 6 | 1 | 0x00 | 0x01
    52222 | 7 | 0 | 0x00 | 0x01
    52222 | 7 | 1 | 0x00 | 0x01
    59912 | 8 | 0 | 0x00 | 0x01
    59912 | 8 | 1 | 0x00 | 0x01
    71989 | 9 | 0 | 0x00 | 0x01
    71989 | 9 | 1 | 0x00 | 0x01
    78318 | 10 | 0 | 0x00 | 0x01
    78318 | 10 | 1 | 0x00 | 0x01
    86090 | 11 | 0 | 0x00 | 0x01
    86090 | 11 | 1 | 0x00 | 0x01
    91720 | 12 | 0 | 0x00 | 0x01
    91720 | 12 | 1 | 0x00 | 0x01
    100453 | 13 | 0 | 0x00 | 0x01
    100453 | 13 | 1 | 0x00 | 0x01
    118414 | 14 | 0 | 0x00 | 0x01
    118414 | 14 | 1 | 0x00 | 0x01
    123745 | 15 | 0 | 0x00 | 0x01
    123745 | 15 | 1 | 0x00 | 0x01
    148184 | 16 | 0 | 0x00 | 0x01
    148184 | 16 | 1 | 0x00 | 0x01
    165213 | 17 | 0 | 0x00 | 0x01
    165213 | 17 | 1 | 0x00 | 0x01
    186766 | lead-out | 1 | 0x00 | 0x01

    17:06:46 #15 Phase 36 File dlgbrnst.cpp, Line 1855
    Burn process started at 40x (6,000 KB/s)

    17:06:46 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

    17:06:46 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #12026): write at #12026

    17:06:46 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #21163): write at #21163

    17:06:46 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #34930): write at #34930

    17:06:46 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 4 (relocatable, no disc pos, no patch infos, orig at #40542): write at #40542

    17:06:46 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 5 (relocatable, no disc pos, no patch infos, orig at #44874): write at #44874

    17:06:46 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 6 (relocatable, no disc pos, no patch infos, orig at #52222): write at #52222

    17:06:46 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 7 (relocatable, no disc pos, no patch infos, orig at #59912): write at #59912

    17:06:46 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 8 (relocatable, no disc pos, no patch infos, orig at #71989): write at #71989

    17:06:46 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 9 (relocatable, no disc pos, no patch infos, orig at #78318): write at #78318

    17:06:46 #26 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 10 (relocatable, no disc pos, no patch infos, orig at #86090): write at #86090

    17:06:46 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 11 (relocatable, no disc pos, no patch infos, orig at #91720): write at #91720

    17:06:46 #28 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 12 (relocatable, no disc pos, no patch infos, orig at #100453): write at #100453

    17:06:46 #29 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 13 (relocatable, no disc pos, no patch infos, orig at #118414): write at #118414

    17:06:46 #30 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 14 (relocatable, no disc pos, no patch infos, orig at #123745): write at #123745

    17:06:46 #31 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 15 (relocatable, no disc pos, no patch infos, orig at #148184): write at #148184

    17:06:46 #32 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 16 (relocatable, no disc pos, no patch infos, orig at #165213): write at #165213

    17:06:46 #33 Text 0 File Mmc.cpp, Line 16040
    StartDAO : CD-Text - Off

    17:06:46 #34 Text 0 File Mmc.cpp, Line 20660
    Set BUFE: supported -> ON

    17:06:46 #35 Text 0 File Mmc.cpp, Line 16327
    CueData, Len=160
    01 00 00 01 00 00 00 00
    01 01 00 00 00 00 00 00
    01 01 01 00 00 00 02 00
    01 02 01 00 00 02 2a 1a
    01 03 01 00 00 04 2c 0d
    01 04 01 00 00 07 2f 37
    01 05 01 00 00 09 02 2a
    01 06 01 00 00 0a 00 18
    01 07 01 00 00 0b 26 16
    01 08 01 00 00 0d 14 3e
    01 09 01 00 00 10 01 40
    01 0a 01 00 00 11 1a 12
    01 0b 01 00 00 13 09 41
    01 0c 01 00 00 14 18 46
    01 0d 01 00 00 16 15 1c
    01 0e 01 00 00 1a 14 40
    01 0f 01 00 00 1b 1f 46
    01 10 01 00 00 20 39 3b
    01 11 01 00 00 24 2c 3f
    01 aa 01 01 00 29 20 10

    17:07:22 #36 Text 0 File Cdrdrv.cpp, Line 1297
    17:07:22.640 - HL-DT-ST DVDRAM GSA-4163B\H0 T2 : Queue again later

    17:09:23 #37 Text 0 File WriterStatus.cpp, Line 115
    <HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 186766 (2D98Eh), lenght 0 blocks

    17:09:27 #38 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    17:09:27 #39 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    17:09:27 #40 Phase 37 File dlgbrnst.cpp, Line 1855
    Burn process completed successfully at 40x (6,000 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 19/05/2004 12:33:44 (Prassi/Veritas driver for win 2K)
    File 'Drivers\nvatabus.sys': Ver=5.10.2600.0446 built by: WinDDK, size=79360 bytes, created 03/06/2004 11:40:46 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 17:33:44
    Nero API version: 6.3.1.25
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 0 TA 2 - 6.3.1.25
    Adapter driver: <nvatabus> HA 0
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y120L0 nvatabus Port 0 ID 0 DMA: Off
    CdRomPeripheral : TOSHIBA DVD-ROM SD-M1712 nvatabus Port 0 ID 1 DMA: Off
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B nvatabus Port 0 ID 2 DMA: Off
    DiskPeripheral : IOMEGA ZIP 250 nvatabus Port 0 ID 3 DMA: Off

    === CDRom-Device-Map ===
    TOSHIBA DVD-ROM SD-M1712 G: CDRom0
    HL-DT-ST DVDRAM GSA-4163 H: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 144MB (148448kB)
    Memory in use : 71 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    1.10.2005
    NeroAPI
    20:29:24 #1 Phase 112 File APIProgress.cpp, Line 273
    DVD-Video files reallocation started

    20:29:24 #2 Phase 114 File APIProgress.cpp, Line 273
    DVD-Video files reallocation completed (no file modified)

    20:29:24 #3 Phase 111 File APIProgress.cpp, Line 273
    DVD-Video files sorted

    20:29:24 #4 Text 0 File Reader.cpp, Line 126
    Reader running

    20:29:24 #5 Text 0 File AudioCompilationImpl.cpp, Line 817
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    20:29:24 #6 Text 0 File Writer.cpp, Line 124
    Writer HL-DT-ST DVDRAM GSA-4163B running

    20:29:24 #7 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    20:29:25 #8 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    20:29:25 #9 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-At-Once, using DVD media

    20:29:25 #10 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286127 (508:01.52, 4465MB)

    20:29:25 #11 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO

    20:29:25 #12 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R
    Disc Manufacturer: TYG02 -
    Disc Application Code: 64, Disc Physical Code: 193

    20:29:25 #13 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    20:29:25 #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [HL-DT-ST DVDRAM GSA-4163B]
    --------------------------------------------------------------

    20:29:25 #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2286128 | lead-out | 1 | 0x00 | 0x41

    20:29:25 #16 Phase 24 File APIProgress.cpp, Line 273
    Caching of files started

    20:29:25 #17 Text 0 File Burncd.cpp, Line 4163
    Cache writing successful.

    20:29:25 #18 Phase 25 File APIProgress.cpp, Line 273
    Caching of files completed

    20:29:25 #19 Phase 36 File APIProgress.cpp, Line 273
    Burn process started at 8x (11,080 KB/s)

    20:29:25 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    20:29:25 #21 Text 0 File DVDR.cpp, Line 2000
    Recording mode: Sequential Recording Mode

    20:29:25 #22 Text 0 File Mmc.cpp, Line 20660
    Set BUFE: supported -> ON

    20:29:25 #23 Text 0 File DVDR.cpp, Line 2141
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    20:29:25 #24 Text 0 File Cdrdrv.cpp, Line 8230
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    20:29:25 #25 Text 0 File DVDR.cpp, Line 4615
    Drive: HL-DT-ST DVDRAM GSA-4163B
    Book Type request: DVD-ROM
    Book Type setting not supported for the loaded disc type

    20:29:50 #26 Text 0 File Cdrdrv.cpp, Line 1297
    20:29:50.937 - HL-DT-ST DVDRAM GSA-4163B\H0 T2 : Queue again later

    20:37:18 #27 Text 0 File WriterStatus.cpp, Line 115
    <HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 2286128 (22E230h), lenght 0 blocks

    20:37:19 #28 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    20:37:19 #29 Text 0 File DVDR.cpp, Line 2383
    EndDAO: Last written address was 2286127

    20:37:25 #30 Text 0 File DVDR.cpp, Line 4615
    Drive: HL-DT-ST DVDRAM GSA-4163B
    Book Type request: DVD+R
    Book Type setting not supported for the loaded disc type

    20:37:25 #31 Phase 37 File APIProgress.cpp, Line 273
    Burn process completed successfully at 8x (11,080 KB/s)

    20:37:26 #32 Text 0 File AudioCompilationImpl.cpp, Line 828
    DRM: DRM burn session terminated.

    20:37:26 #33 Text 0 File AudioCompilationImpl.cpp, Line 857
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 19/05/2004 12:33:44 (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


    [01.10.2005]------------------------------------
    20:29:24 Robot error messages from:
    ====== *** NeroAPI, History File *** ======
     
  4. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96


    ps the logfile is appended to by subsequent burns so the way to identify the sections is via these lines "*** NeroAPI, History File *** ======"). as it happens you have a section of dvd log in there so i've made my journey useful and have commented on that at the end of the cd log section...

    cd log section -

    - too old, 6.6.0.16 is latest.

    - firmware is slightly outdated, A105 is here - http://forum.rpc1.org/dl_firmware.php?download_id=1973

    - that question mark either means external burner or drivers not loaded correctly

    - DMA needs to be ON, reload your nvidia motherboard drivers

    - 512mb is sufficient total memory, but you have to close down more programs prior to any burns as this is gonna cause your hard disc to 'swap' as it starts to dole out 'virtual memory'. keep sufficient memory free and you won't be using virtual memory which is a portion of your hard disc

    - there's part of the problem. i only do 24x max for data cd's and 16x max for audio cd's - with popping/skipping audio cd's it's caused by the other problems i've mentioned and i'd keep the burn speed down even when you've addressed all the other problems




    dvd log section -

    - if you use DVS Shrink, set target size in Shrink's preferences to 4300MB, thus avoiding outer edge of discs and not sacrificing much space

    - are these genuine TY discs ?, as there's a lot of fakes out there..

    - you can only 'booktype' +R discs, not -R. change this setting to auto. it can be done in Nero via 'Recorder/Choose Recorder/Options'

    - most ppl recommend 4x max for movie burns


     
  5. CrazyNW

    CrazyNW Member

    Joined:
    Oct 1, 2005
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    Hi! Thanks again for your VERY thorough reply. There are a few things there that I'm not too worried about.

    For example, burning speed. These clicks were occuring yesterday when I was burning CDs at just 12x speed on my Matshita SW-9571 so I've kinda ruled that out.

    I am, however, a little baffled about this whole DMA thing...

    I've re-installed my nVidia nForce2 drivers but the settings don't seem to have changed. Furthermore the configuration of my device manager screens seem a little unusual.

    When I go into Device Manager and double click "NVIDIA NFORCE 2 ATA Controller (V2.6)" under the "IDE ADA/ATAPI Controllers" menu a new window comes up with the following tabs:

    1. GENERAL
    2. PRIMARY CHANNEL
    3. SECONDARY CHANNEL
    4. DRIVER
    5. RESOURCES

    My LG CD/DVD burner is listed on the SECONDARY CHANNEL TAB as the MASTER DRIVER. In the "Transfer Mode" field underneath are the words "Ultra DMA 2 - Ultra 33" with a green tick next to it. But this is all greyed out. Underneath, the option "Let BIOS select transfer mode" is selected and highlighted.

    All of my other drives - including the hard disc are showing the same.

    Is this my problem? Do I need to deselect "Let BIOS select transfer mode" and force the setting to "Ultra DMA 2 - Ultra 33" or should I choose one of the other settings in the list, e.g. "Ultra DMA 1" or "Ultra DMA 0"?

    Thanks again! :)

     
    Last edited: Oct 1, 2005
  6. CrazyNW

    CrazyNW Member

    Joined:
    Oct 1, 2005
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    OK, this is REALLY weird.

    I've forced my hardware DMA settings off "Let BIOS select transfer mode" and onto the following settings:


    PRIMARY CHANNEL

    Master Drive 6Y120LO:
    Ultra DMA 6 - Ultra 133

    Slave Drive Toshiba DVD-ROM SD-M1712:
    Ultra DMA 2- Ultra 133

    SECONDARY CHANNEL

    Master Drive HL-DT-ST DVD-RAM GSA 4163B:
    Ultra DMA 2 – Ultra 133

    Slave Drive IOMEGA ZIP 250:
    Ultra DMA 2 – Ultra 133


    I then removed Nero 6.3.1.25 using Nero's clean remove tool and replaced it with 6.6.0.16. I copied a CD onto a CD-RW (for testing purposes only) and, bizarelly, the Nero log STILL shows that the DMA settings are "off" for all drives!

    Here is the log:


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.16
    Internal Version: 6, 6, 0, 16b
    (Nero Express)
    Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 0 TA 2 - 6.6.0.16
    Adapter driver: <nvatabus> HA 0
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <TOSHIBA DVD-ROM SD-M1712>Version: 1004 - HA 0 TA 1 - 6.6.0.16
    Adapter driver: <nvatabus> HA 0

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y120L0 nvatabus Port 0 ID 0 DMA: Off
    CdRomPeripheral : TOSHIBA DVD-ROM SD-M1712 nvatabus Port 0 ID 1 DMA: Off
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B nvatabus Port 0 ID 2 DMA: Off
    DiskPeripheral : IOMEGA ZIP 250 nvatabus Port 0 ID 3 DMA: Off

    === CDRom-Device-Map ===
    TOSHIBA DVD-ROM SD-M1712 G: CDRom0
    HL-DT-ST DVDRAM GSA-4163B H: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 182MB (187228kB)
    Memory in use : 64
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    2.10.2005
    CD Copy
    11:01:45 #1 Text 0 File Burncd.cpp, Line 2948
    HL-DT-ST DVDRAM GSA-4163B
    Buffer underrun protection activated

    11:01:45 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    11:01:45 #3 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVDRAM GSA-4163B running

    11:01:45 #4 Phase 48 File dlgbrnst.cpp, Line 1832
    Analyzing disc

    11:01:45 #5 CDCOPY -1 File CDCopy.cpp, Line 1912
    The CD is copyrighted

    11:01:48 #6 Text 0 File CDCopy.cpp, Line 2128
    _Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
    Track 1: 37 37 ( 0:02.37) 23282 23281 ( 5:12.31)
    Track 2: 23282 23282 ( 5:12.32) 40452 40451 ( 9:01.26)
    Track 3: 40452 40452 ( 9:01.27) 49447 49446 ( 11:01.21)
    Track 4: 49447 49447 ( 11:01.22) 76767 76766 ( 17:05.41)
    Track 5: 76767 76767 ( 17:05.42) 91335 91334 ( 20:19.59)
    Track 6: 91335 91335 ( 20:19.60) 107780 107779 ( 23:59.04)
    Track 7: 107780 107780 ( 23:59.05) 120095 120094 ( 26:43.19)
    Track 8: 120095 120095 ( 26:43.20) 139637 139636 ( 31:03.61)
    Track 9: 139637 139637 ( 31:03.62) 151130 151129 ( 33:37.04)
    Track 10: 151130 151130 ( 33:37.05) 159717 159716 ( 35:31.41)
    Track 11: 159717 159717 ( 35:31.42) 169647 169646 ( 37:43.71)
    Track 12: 169647 169647 ( 37:43.72) 179440 179439 ( 39:54.39)
    Track 13: 179440 179440 ( 39:54.40) 189457 189456 ( 42:08.06)
    Track 14: 189457 189457 ( 42:08.07) 225750 225749 ( 50:11.74)

    11:01:48 #7 Text 0 File CDCopy.cpp, Line 840
    Copy options: copy on-the-fly: ON
    read ISRC/MCN: OFF
    use jitter correction: OFF
    data options
    ignore read error: ON write defekt blocks OFF
    read raw data: OFF read r-w subchannel data: OFF
    audio options
    ignore read error: ON
    read indexes: OFF read r-w subchannel data: OFF
    source disc does not look like CD Extra
    01. 37 - 23282 = 23245, audio (TRM_AUDIO_NOPRE, block size 2352)
    02. 23282 - 40452 = 17170, audio (TRM_AUDIO_NOPRE, block size 2352)
    03. 40452 - 49447 = 8995, audio (TRM_AUDIO_NOPRE, block size 2352)
    04. 49447 - 76767 = 27320, audio (TRM_AUDIO_NOPRE, block size 2352)
    05. 76767 - 91335 = 14568, audio (TRM_AUDIO_NOPRE, block size 2352)
    06. 91335 - 107780 = 16445, audio (TRM_AUDIO_NOPRE, block size 2352)
    07. 107780 - 120095 = 12315, audio (TRM_AUDIO_NOPRE, block size 2352)
    08. 120095 - 139637 = 19542, audio (TRM_AUDIO_NOPRE, block size 2352)
    09. 139637 - 151130 = 11493, audio (TRM_AUDIO_NOPRE, block size 2352)
    10. 151130 - 159717 = 8587, audio (TRM_AUDIO_NOPRE, block size 2352)
    11. 159717 - 169647 = 9930, audio (TRM_AUDIO_NOPRE, block size 2352)
    12. 169647 - 179440 = 9793, audio (TRM_AUDIO_NOPRE, block size 2352)
    13. 179440 - 189457 = 10017, audio (TRM_AUDIO_NOPRE, block size 2352)
    14. 189457 - 225750 = 36293, audio (TRM_AUDIO_NOPRE, block size 2352)

    11:01:53 #8 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using CD-R/RW media

    11:02:33 #9 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 359848 ( 79:59.73)
    Last address to be written: 225749 ( 50:11.74)

    11:02:33 #10 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    11:02:33 #11 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: HL-DT-ST DVDRAM GSA-4163B;
    CDRW code: 00 97 32 10; OSJ entry from: Prodisc Technology Inc.
    ATIP Data:
    Special Info [hex] 1: B3 00 CE, 2: 61 20 0A (LI 97:32.10), 3: 4F 3B 4A (LO 79:59.74)
    Additional Info [hex] 1: 24 1A D8, 2: 26 B2 4A, 3: 00 00 00 (invalid)

    11:02:33 #12 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    This disc is not empty.
    (Medium in drive: CD-RW. Medium required by compilation: CD-R/RW.)
    Disc was erased successfully.
    Accessing disc...
    (Medium in drive: CD-RW. Medium required by compilation: CD-R/RW.)

    11:02:33 #13 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_AUDIO_NOPRE (1 - Audio)
    2 indices, index0 (187) not provided
    original disc pos #37 + 23245 (23245) = #23282/5:10.32
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 23245 blocks [HL-DT-ST DVDRAM GSA-4163B]
    1: TRM_AUDIO_NOPRE (2 - Audio)
    2 indices, index0 (0) provided
    original disc pos #23282 + 17170 (17170) = #40452/8:59.27
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 17170 blocks [HL-DT-ST DVDRAM GSA-4163B]
    2: TRM_AUDIO_NOPRE (3 - Audio)
    2 indices, index0 (0) provided
    original disc pos #40452 + 8995 (8995) = #49447/10:59.22
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 8995 blocks [HL-DT-ST DVDRAM GSA-4163B]
    3: TRM_AUDIO_NOPRE (4 - Audio)
    2 indices, index0 (0) provided
    original disc pos #49447 + 27320 (27320) = #76767/17:3.42
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 27320 blocks [HL-DT-ST DVDRAM GSA-4163B]
    4: TRM_AUDIO_NOPRE (5 - Audio)
    2 indices, index0 (0) provided
    original disc pos #76767 + 14568 (14568) = #91335/20:17.60
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 14568 blocks [HL-DT-ST DVDRAM GSA-4163B]
    5: TRM_AUDIO_NOPRE (6 - Audio)
    2 indices, index0 (0) provided
    original disc pos #91335 + 16445 (16445) = #107780/23:57.5
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 16445 blocks [HL-DT-ST DVDRAM GSA-4163B]
    6: TRM_AUDIO_NOPRE (7 - Audio)
    2 indices, index0 (0) provided
    original disc pos #107780 + 12315 (12315) = #120095/26:41.20
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 12315 blocks [HL-DT-ST DVDRAM GSA-4163B]
    7: TRM_AUDIO_NOPRE (8 - Audio)
    2 indices, index0 (0) provided
    original disc pos #120095 + 19542 (19542) = #139637/31:1.62
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 19542 blocks [HL-DT-ST DVDRAM GSA-4163B]
    8: TRM_AUDIO_NOPRE (9 - Audio)
    2 indices, index0 (0) provided
    original disc pos #139637 + 11493 (11493) = #151130/33:35.5
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 11493 blocks [HL-DT-ST DVDRAM GSA-4163B]
    9: TRM_AUDIO_NOPRE (10 - Audio)
    2 indices, index0 (0) provided
    original disc pos #151130 + 8587 (8587) = #159717/35:29.42
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 8587 blocks [HL-DT-ST DVDRAM GSA-4163B]
    10: TRM_AUDIO_NOPRE (11 - Audio)
    2 indices, index0 (0) provided
    original disc pos #159717 + 9930 (9930) = #169647/37:41.72
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 9930 blocks [HL-DT-ST DVDRAM GSA-4163B]
    11: TRM_AUDIO_NOPRE (12 - Audio)
    2 indices, index0 (0) provided
    original disc pos #169647 + 9793 (9793) = #179440/39:52.40
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 9793 blocks [HL-DT-ST DVDRAM GSA-4163B]
    12: TRM_AUDIO_NOPRE (13 - Audio)
    2 indices, index0 (0) provided
    original disc pos #179440 + 10017 (10017) = #189457/42:6.7
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 10017 blocks [HL-DT-ST DVDRAM GSA-4163B]
    13: TRM_AUDIO_NOPRE (14 - Audio)
    2 indices, index0 (0) provided
    original disc pos #189457 + 36293 (36293) = #225750/50:10.0
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 36293 blocks [HL-DT-ST DVDRAM GSA-4163B]
    --------------------------------------------------------------

    11:02:33 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 14:
    1: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 0 439824 55112064, ISRC ""
    2: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 55112064 55112064 95495904, ISRC ""
    3: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 95495904 95495904 116652144, ISRC ""
    4: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 116652144 116652144 180908784, ISRC ""
    5: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 180908784 180908784 215172720, ISRC ""
    6: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 215172720 215172720 253851360, ISRC ""
    7: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 253851360 253851360 282816240, ISRC ""
    8: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 282816240 282816240 328779024, ISRC ""
    9: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 328779024 328779024 355810560, ISRC ""
    10: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 355810560 355810560 376007184, ISRC ""
    11: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 376007184 376007184 399362544, ISRC ""
    12: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 399362544 399362544 422395680, ISRC ""
    13: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 422395680 422395680 445955664, ISRC ""
    14: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 445955664 445955664 531316800, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    -150 | lead-in | 0 | 0x01 | 0x00
    -150 | 1 | 0 | 0x01 | 0x00
    37 | 1 | 1 | 0x01 | 0x00
    23282 | 2 | 0 | 0x01 | 0x00
    23282 | 2 | 1 | 0x01 | 0x00
    40452 | 3 | 0 | 0x01 | 0x00
    40452 | 3 | 1 | 0x01 | 0x00
    49447 | 4 | 0 | 0x01 | 0x00
    49447 | 4 | 1 | 0x01 | 0x00
    76767 | 5 | 0 | 0x01 | 0x00
    76767 | 5 | 1 | 0x01 | 0x00
    91335 | 6 | 0 | 0x01 | 0x00
    91335 | 6 | 1 | 0x01 | 0x00
    107780 | 7 | 0 | 0x01 | 0x00
    107780 | 7 | 1 | 0x01 | 0x00
    120095 | 8 | 0 | 0x01 | 0x00
    120095 | 8 | 1 | 0x01 | 0x00
    139637 | 9 | 0 | 0x01 | 0x00
    139637 | 9 | 1 | 0x01 | 0x00
    151130 | 10 | 0 | 0x01 | 0x00
    151130 | 10 | 1 | 0x01 | 0x00
    159717 | 11 | 0 | 0x01 | 0x00
    159717 | 11 | 1 | 0x01 | 0x00
    169647 | 12 | 0 | 0x01 | 0x00
    169647 | 12 | 1 | 0x01 | 0x00
    179440 | 13 | 0 | 0x01 | 0x00
    179440 | 13 | 1 | 0x01 | 0x00
    189457 | 14 | 0 | 0x01 | 0x00
    189457 | 14 | 1 | 0x01 | 0x00
    225750 | lead-out | 1 | 0x01 | 0x00

    11:02:34 #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 10x (1,500 KB/s)

    11:02:34 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #37): write at #37

    11:02:34 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #23282): write at #23282

    11:02:34 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #40452): write at #40452

    11:02:34 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #49447): write at #49447

    11:02:34 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 4 (relocatable, no disc pos, no patch infos, orig at #76767): write at #76767

    11:02:34 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 5 (relocatable, no disc pos, no patch infos, orig at #91335): write at #91335

    11:02:34 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 6 (relocatable, no disc pos, no patch infos, orig at #107780): write at #107780

    11:02:34 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 7 (relocatable, no disc pos, no patch infos, orig at #120095): write at #120095

    11:02:34 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 8 (relocatable, no disc pos, no patch infos, orig at #139637): write at #139637

    11:02:34 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 9 (relocatable, no disc pos, no patch infos, orig at #151130): write at #151130

    11:02:34 #26 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 10 (relocatable, no disc pos, no patch infos, orig at #159717): write at #159717

    11:02:34 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 11 (relocatable, no disc pos, no patch infos, orig at #169647): write at #169647

    11:02:34 #28 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 12 (relocatable, no disc pos, no patch infos, orig at #179440): write at #179440

    11:02:34 #29 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 13 (relocatable, no disc pos, no patch infos, orig at #189457): write at #189457

    11:02:34 #30 Text 0 File Mmc.cpp, Line 16924
    StartDAO : CD-Text - Off

    11:02:34 #31 Text 0 File Mmc.cpp, Line 21708
    Set BUFE: Buffer underrun protection -> ON

    11:02:34 #32 Text 0 File Mmc.cpp, Line 17211
    CueData, Len=136
    01 00 00 01 00 00 00 00
    01 01 00 00 00 00 00 00
    01 01 01 00 00 00 02 25
    01 02 01 00 00 05 0c 20
    01 03 01 00 00 09 01 1b
    01 04 01 00 00 0b 01 16
    01 05 01 00 00 11 05 2a
    01 06 01 00 00 14 13 3c
    01 07 01 00 00 17 3b 05
    01 08 01 00 00 1a 2b 14
    01 09 01 00 00 1f 03 3e
    01 0a 01 00 00 21 25 05
    01 0b 01 00 00 23 1f 2a
    01 0c 01 00 00 25 2b 48
    01 0d 01 00 00 27 36 28
    01 0e 01 00 00 2a 08 07
    01 aa 01 01 00 32 0c 00

    11:03:04 #33 Text 0 File Cdrdrv.cpp, Line 1286
    11:03:04.593 - HL-DT-ST DVDRAM GSA-4163B\H0 T2 : Queue again later

    11:08:18 #34 Text 0 File WriterStatus.cpp, Line 116
    <HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 225750 (371D6h), lenght 0 blocks

    11:08:18 #35 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    11:08:28 #36 Phase 37 File dlgbrnst.cpp, Line 1832
    Burn process completed successfully at 10x (1,500 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 19/05/2004 12:33:44 (Prassi/Veritas driver for win 2K)
    File 'Drivers\nvatabus.sys': Ver=5.10.2600.0446 built by: WinDDK, size=79360 bytes, created 03/06/2004 10:40:46 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======


    I really don't know what to do next. Is there something in BIOS that I need to tweak? What I don't understand is that normally, if Nero detects that DMA is off, it fires up a message asking if you want to turn it on. I've had no such message.

    Furthermore I don't understand why it says: Bus Type : default (0) -> ATAPI, detected: ?

    Because I don't have, and have never had, an external burner.


    Thanks again for your continuing help,

    John
     
    Last edited: Oct 2, 2005
  7. CrazyNW

    CrazyNW Member

    Joined:
    Oct 1, 2005
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    Crap! I thought I'd made a breakthrough there. I downloaded and installed some different drivers from MSI's website. All of a sudden the Primary IDE and Secondary IDE channels were separate and "DMA if available" was displayed. I did a burn and Nero FINALLY acknowledged that DMA was ON.

    YAY!

    So I did another burn (24x speed) and... a massive digital pop about 30 seconds from the end. ARGH!!!!!

    Is there something else I can tweak?

    John
     
  8. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    just what i recommended before (firmware & lowering speed), plus in one of those logs i just saw this
    - that's a rewritable disc..
     
  9. CrazyNW

    CrazyNW Member

    Joined:
    Oct 1, 2005
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    I'll update the firmware but I don't think it's to blame because the last 2 firmware updates from LG were for DVD issues, not CD ones.

    I was using the CD-RW as a test only to check the results in the Nero Log. I've ruined 12 CDs already!

    I guess Nero is just not working right.

    John
     
  10. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
  11. CrazyNW

    CrazyNW Member

    Joined:
    Oct 1, 2005
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    OK. I've done everything. I've installed the latest version of Nero. I've updated my DVD burner's software. I've reduced my burn speed to x16. I'm using CD-Rs rather than CD-RW. My DMA settings are fine.

    And I still have problems. I'm currently 8 tracks into listening to my copy. So far it's cracked once and, just now, mid-way through track 8 it's skipped VERY badly.

    What the hell is wrong with this thing? I've copied the Nero Log below. Is there ANYTHING more I can do?


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.16
    Internal Version: 6, 6, 0, 16b
    (Nero Express)
    Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 1 TA 0 - 6.6.0.16
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <TOSHIBA DVD-ROM SD-M1712>Version: 1004 - HA 0 TA 1 - 6.6.0.16
    Adapter driver: <atapi> HA 0

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TOSHIBA DVD-ROM SD-M1712 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 0 DMA: On
    DiskPeripheral : IOMEGA ZIP 250 atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    TOSHIBA DVD-ROM SD-M1712 G: CDRom0
    HL-DT-ST DVDRAM GSA-4163B H: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 179MB (183740kB)
    Memory in use : 64
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    2.10.2005
    CD Copy
    21:04:13 #1 Text 0 File Burncd.cpp, Line 2948
    HL-DT-ST DVDRAM GSA-4163B
    Buffer underrun protection activated

    21:04:13 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    21:04:13 #3 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVDRAM GSA-4163B running

    21:04:13 #4 Phase 48 File dlgbrnst.cpp, Line 1832
    Analyzing disc

    21:04:13 #5 CDCOPY -1 File CDCopy.cpp, Line 1912
    The CD is copyrighted

    21:04:16 #6 Text 0 File CDCopy.cpp, Line 2128
    _Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
    Track 1: 37 37 ( 0:02.37) 23282 23281 ( 5:12.31)
    Track 2: 23282 23282 ( 5:12.32) 40452 40451 ( 9:01.26)
    Track 3: 40452 40452 ( 9:01.27) 49447 49446 ( 11:01.21)
    Track 4: 49447 49447 ( 11:01.22) 76767 76766 ( 17:05.41)
    Track 5: 76767 76767 ( 17:05.42) 91335 91334 ( 20:19.59)
    Track 6: 91335 91335 ( 20:19.60) 107780 107779 ( 23:59.04)
    Track 7: 107780 107780 ( 23:59.05) 120095 120094 ( 26:43.19)
    Track 8: 120095 120095 ( 26:43.20) 139637 139636 ( 31:03.61)
    Track 9: 139637 139637 ( 31:03.62) 151130 151129 ( 33:37.04)
    Track 10: 151130 151130 ( 33:37.05) 159717 159716 ( 35:31.41)
    Track 11: 159717 159717 ( 35:31.42) 169647 169646 ( 37:43.71)
    Track 12: 169647 169647 ( 37:43.72) 179440 179439 ( 39:54.39)
    Track 13: 179440 179440 ( 39:54.40) 189457 189456 ( 42:08.06)
    Track 14: 189457 189457 ( 42:08.07) 225750 225749 ( 50:11.74)

    21:04:16 #7 Text 0 File CDCopy.cpp, Line 840
    Copy options: copy on-the-fly: ON
    read ISRC/MCN: OFF
    use jitter correction: OFF
    data options
    ignore read error: ON write defekt blocks OFF
    read raw data: OFF read r-w subchannel data: OFF
    audio options
    ignore read error: ON
    read indexes: OFF read r-w subchannel data: OFF
    source disc does not look like CD Extra
    01. 37 - 23282 = 23245, audio (TRM_AUDIO_NOPRE, block size 2352)
    02. 23282 - 40452 = 17170, audio (TRM_AUDIO_NOPRE, block size 2352)
    03. 40452 - 49447 = 8995, audio (TRM_AUDIO_NOPRE, block size 2352)
    04. 49447 - 76767 = 27320, audio (TRM_AUDIO_NOPRE, block size 2352)
    05. 76767 - 91335 = 14568, audio (TRM_AUDIO_NOPRE, block size 2352)
    06. 91335 - 107780 = 16445, audio (TRM_AUDIO_NOPRE, block size 2352)
    07. 107780 - 120095 = 12315, audio (TRM_AUDIO_NOPRE, block size 2352)
    08. 120095 - 139637 = 19542, audio (TRM_AUDIO_NOPRE, block size 2352)
    09. 139637 - 151130 = 11493, audio (TRM_AUDIO_NOPRE, block size 2352)
    10. 151130 - 159717 = 8587, audio (TRM_AUDIO_NOPRE, block size 2352)
    11. 159717 - 169647 = 9930, audio (TRM_AUDIO_NOPRE, block size 2352)
    12. 169647 - 179440 = 9793, audio (TRM_AUDIO_NOPRE, block size 2352)
    13. 179440 - 189457 = 10017, audio (TRM_AUDIO_NOPRE, block size 2352)
    14. 189457 - 225750 = 36293, audio (TRM_AUDIO_NOPRE, block size 2352)

    21:04:16 #8 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using CD-R/RW media

    21:04:16 #9 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 359846 ( 79:59.71)
    Last address to be written: 225749 ( 50:11.74)

    21:04:16 #10 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    21:04:16 #11 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: HL-DT-ST DVDRAM GSA-4163B;
    CDR code: 00 97 24 01; OSJ entry from: Taiyo Yuden Company Limited
    ATIP Data:
    Special Info [hex] 1: C0 00 98, 2: 61 18 01 (LI 97:24.01), 3: 4F 3B 48 (LO 79:59.72)
    Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

    21:04:16 #12 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    21:04:16 #13 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_AUDIO_NOPRE (1 - Audio)
    2 indices, index0 (187) not provided
    original disc pos #37 + 23245 (23245) = #23282/5:10.32
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 23245 blocks [HL-DT-ST DVDRAM GSA-4163B]
    1: TRM_AUDIO_NOPRE (2 - Audio)
    2 indices, index0 (0) provided
    original disc pos #23282 + 17170 (17170) = #40452/8:59.27
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 17170 blocks [HL-DT-ST DVDRAM GSA-4163B]
    2: TRM_AUDIO_NOPRE (3 - Audio)
    2 indices, index0 (0) provided
    original disc pos #40452 + 8995 (8995) = #49447/10:59.22
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 8995 blocks [HL-DT-ST DVDRAM GSA-4163B]
    3: TRM_AUDIO_NOPRE (4 - Audio)
    2 indices, index0 (0) provided
    original disc pos #49447 + 27320 (27320) = #76767/17:3.42
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 27320 blocks [HL-DT-ST DVDRAM GSA-4163B]
    4: TRM_AUDIO_NOPRE (5 - Audio)
    2 indices, index0 (0) provided
    original disc pos #76767 + 14568 (14568) = #91335/20:17.60
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 14568 blocks [HL-DT-ST DVDRAM GSA-4163B]
    5: TRM_AUDIO_NOPRE (6 - Audio)
    2 indices, index0 (0) provided
    original disc pos #91335 + 16445 (16445) = #107780/23:57.5
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 16445 blocks [HL-DT-ST DVDRAM GSA-4163B]
    6: TRM_AUDIO_NOPRE (7 - Audio)
    2 indices, index0 (0) provided
    original disc pos #107780 + 12315 (12315) = #120095/26:41.20
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 12315 blocks [HL-DT-ST DVDRAM GSA-4163B]
    7: TRM_AUDIO_NOPRE (8 - Audio)
    2 indices, index0 (0) provided
    original disc pos #120095 + 19542 (19542) = #139637/31:1.62
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 19542 blocks [HL-DT-ST DVDRAM GSA-4163B]
    8: TRM_AUDIO_NOPRE (9 - Audio)
    2 indices, index0 (0) provided
    original disc pos #139637 + 11493 (11493) = #151130/33:35.5
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 11493 blocks [HL-DT-ST DVDRAM GSA-4163B]
    9: TRM_AUDIO_NOPRE (10 - Audio)
    2 indices, index0 (0) provided
    original disc pos #151130 + 8587 (8587) = #159717/35:29.42
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 8587 blocks [HL-DT-ST DVDRAM GSA-4163B]
    10: TRM_AUDIO_NOPRE (11 - Audio)
    2 indices, index0 (0) provided
    original disc pos #159717 + 9930 (9930) = #169647/37:41.72
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 9930 blocks [HL-DT-ST DVDRAM GSA-4163B]
    11: TRM_AUDIO_NOPRE (12 - Audio)
    2 indices, index0 (0) provided
    original disc pos #169647 + 9793 (9793) = #179440/39:52.40
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 9793 blocks [HL-DT-ST DVDRAM GSA-4163B]
    12: TRM_AUDIO_NOPRE (13 - Audio)
    2 indices, index0 (0) provided
    original disc pos #179440 + 10017 (10017) = #189457/42:6.7
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 10017 blocks [HL-DT-ST DVDRAM GSA-4163B]
    13: TRM_AUDIO_NOPRE (14 - Audio)
    2 indices, index0 (0) provided
    original disc pos #189457 + 36293 (36293) = #225750/50:10.0
    relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 36293 blocks [HL-DT-ST DVDRAM GSA-4163B]
    --------------------------------------------------------------

    21:04:16 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 14:
    1: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 0 439824 55112064, ISRC ""
    2: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 55112064 55112064 95495904, ISRC ""
    3: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 95495904 95495904 116652144, ISRC ""
    4: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 116652144 116652144 180908784, ISRC ""
    5: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 180908784 180908784 215172720, ISRC ""
    6: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 215172720 215172720 253851360, ISRC ""
    7: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 253851360 253851360 282816240, ISRC ""
    8: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 282816240 282816240 328779024, ISRC ""
    9: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 328779024 328779024 355810560, ISRC ""
    10: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 355810560 355810560 376007184, ISRC ""
    11: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 376007184 376007184 399362544, ISRC ""
    12: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 399362544 399362544 422395680, ISRC ""
    13: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 422395680 422395680 445955664, ISRC ""
    14: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 445955664 445955664 531316800, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    -150 | lead-in | 0 | 0x01 | 0x00
    -150 | 1 | 0 | 0x01 | 0x00
    37 | 1 | 1 | 0x01 | 0x00
    23282 | 2 | 0 | 0x01 | 0x00
    23282 | 2 | 1 | 0x01 | 0x00
    40452 | 3 | 0 | 0x01 | 0x00
    40452 | 3 | 1 | 0x01 | 0x00
    49447 | 4 | 0 | 0x01 | 0x00
    49447 | 4 | 1 | 0x01 | 0x00
    76767 | 5 | 0 | 0x01 | 0x00
    76767 | 5 | 1 | 0x01 | 0x00
    91335 | 6 | 0 | 0x01 | 0x00
    91335 | 6 | 1 | 0x01 | 0x00
    107780 | 7 | 0 | 0x01 | 0x00
    107780 | 7 | 1 | 0x01 | 0x00
    120095 | 8 | 0 | 0x01 | 0x00
    120095 | 8 | 1 | 0x01 | 0x00
    139637 | 9 | 0 | 0x01 | 0x00
    139637 | 9 | 1 | 0x01 | 0x00
    151130 | 10 | 0 | 0x01 | 0x00
    151130 | 10 | 1 | 0x01 | 0x00
    159717 | 11 | 0 | 0x01 | 0x00
    159717 | 11 | 1 | 0x01 | 0x00
    169647 | 12 | 0 | 0x01 | 0x00
    169647 | 12 | 1 | 0x01 | 0x00
    179440 | 13 | 0 | 0x01 | 0x00
    179440 | 13 | 1 | 0x01 | 0x00
    189457 | 14 | 0 | 0x01 | 0x00
    189457 | 14 | 1 | 0x01 | 0x00
    225750 | lead-out | 1 | 0x01 | 0x00

    21:04:17 #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 16x (2,400 KB/s)

    21:04:17 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #37): write at #37

    21:04:17 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #23282): write at #23282

    21:04:17 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #40452): write at #40452

    21:04:17 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #49447): write at #49447

    21:04:17 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 4 (relocatable, no disc pos, no patch infos, orig at #76767): write at #76767

    21:04:17 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 5 (relocatable, no disc pos, no patch infos, orig at #91335): write at #91335

    21:04:17 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 6 (relocatable, no disc pos, no patch infos, orig at #107780): write at #107780

    21:04:17 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 7 (relocatable, no disc pos, no patch infos, orig at #120095): write at #120095

    21:04:17 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 8 (relocatable, no disc pos, no patch infos, orig at #139637): write at #139637

    21:04:17 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 9 (relocatable, no disc pos, no patch infos, orig at #151130): write at #151130

    21:04:17 #26 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 10 (relocatable, no disc pos, no patch infos, orig at #159717): write at #159717

    21:04:17 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 11 (relocatable, no disc pos, no patch infos, orig at #169647): write at #169647

    21:04:17 #28 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 12 (relocatable, no disc pos, no patch infos, orig at #179440): write at #179440

    21:04:17 #29 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 13 (relocatable, no disc pos, no patch infos, orig at #189457): write at #189457

    21:04:17 #30 Text 0 File Mmc.cpp, Line 16924
    StartDAO : CD-Text - Off

    21:04:17 #31 Text 0 File Mmc.cpp, Line 21708
    Set BUFE: Buffer underrun protection -> ON

    21:04:17 #32 Text 0 File Mmc.cpp, Line 17211
    CueData, Len=136
    01 00 00 01 00 00 00 00
    01 01 00 00 00 00 00 00
    01 01 01 00 00 00 02 25
    01 02 01 00 00 05 0c 20
    01 03 01 00 00 09 01 1b
    01 04 01 00 00 0b 01 16
    01 05 01 00 00 11 05 2a
    01 06 01 00 00 14 13 3c
    01 07 01 00 00 17 3b 05
    01 08 01 00 00 1a 2b 14
    01 09 01 00 00 1f 03 3e
    01 0a 01 00 00 21 25 05
    01 0b 01 00 00 23 1f 2a
    01 0c 01 00 00 25 2b 48
    01 0d 01 00 00 27 36 28
    01 0e 01 00 00 2a 08 07
    01 aa 01 01 00 32 0c 00

    21:04:53 #33 Text 0 File Cdrdrv.cpp, Line 1286
    21:04:53.062 - HL-DT-ST DVDRAM GSA-4163B\H1 T0 : Queue again later

    21:08:11 #34 Text 0 File WriterStatus.cpp, Line 116
    <HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 225750 (371D6h), lenght 0 blocks

    21:08:11 #35 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    21:08:18 #36 Phase 37 File dlgbrnst.cpp, Line 1832
    Burn process completed successfully at 16x (2,400 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 19/05/2004 12:33:44 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
     
  12. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    can you play the cd on another player ?, maybe your player is picky/needs cleaning...
     
  13. CrazyNW

    CrazyNW Member

    Joined:
    Oct 1, 2005
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    I just played the disc in Windows Media Player 10 and it skips in exactly the same place (3:20 into track 8).

    :-(

    I suspect there's something wrong under the surface. Possibly in BIOS or the registry but I have no idea what it could be. I've used Nero's own software cleaner to uninstall the program in the past.
     
    Last edited: Oct 2, 2005
  14. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    ok, let's something other than disc copy stuff (i don't ever use Nero for anything like that). here's one of my fave programs - cdex 1.51 - http://www.vnunet.com/vnunet/downloads/2128746/cdex-51 - use that to rip audio tracks from original to your hard drive, then use Nero to create an audio cd from those tracks
     
  15. CrazyNW

    CrazyNW Member

    Joined:
    Oct 1, 2005
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    Well this is interesting. Maybe.

    Prior to trying the program you suggested, I used Nero Burning Rom to save the tracks from my original CD directly onto the hard drive. I then burned those tracks onto CD using Nero, burn speed 16%.

    It seems to be a perfect copy.

    Okay, so I could do it this way every time, but I'd like to know why the basic "copy disc" program isn't working properly for me when it appears to be working for everybody else! And it's certainly worked flawlessly for me in the past...

    (PS Just tried another copy - with "on the fly" disabled - and it's another coaster. My 18th TY coaster in 3 days!)
     
    Last edited: Oct 3, 2005
  16. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    dunno, 'fraid i don't know the answer to that question. i've been burning CD's pretty much since recordable CD's first came out and i've very rarely had problems, whether it be audio or data, and the only 'copy disc' program i've trusted i think is clonecd, other than that i've always preferred other methods to copy audio/data around.
     
  17. CrazyNW

    CrazyNW Member

    Joined:
    Oct 1, 2005
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    Creaky, do you mind if I ask which IDE channel your reader and burner are on? At the moment my reader shares the IDE channel with my hard drive and I'm wondering if it might be slowing things down. Would it help if I put both CD drives on the Secondary channel and moved the Zip drive over to the Primary channel with the hard disc?

    I've been reading today that VIA (presumably Athlon) motherboards are susceptable to DMA problems and that's what mine is. Not sure if that's relevant.

    Thanks again for your continued help.
     
  18. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    i've only got a tiny case so i've got the proverbial split of hard drive on Primary IDE channel, dvd burner on Secondary; and my most heavily-used drive (cd burner/dvd-rom combo) is actually in a Belkin USB2.0 enclosure.

    i can't remember the spec of the Zip 250, mine was a scsi attached one but i didn't use it, only bought it as a disaster recovery drive as my dad has an internal zip drive; however he very rarely uses it so i put my zip drive away. maybe you can ditch the zip drive and move to something better, ie use your cd burner instead.. did a quick google but it ddn't turn up much - http://pw2.netcom.com/~deepone/zipjaz/atapi.html and http://forums.afterdawn.com/thread_view.cfm/234552
     

Share This Page