Ok I'm new here and i desperately need help with Nero. I don't know much about Nero but so far i never had problems burning dvds with Nero but all of a sudden today i couldn't burn my mom's movie for her. It says could not perform end of disc and i wasted so many dvd-r trying to burn. Please somebody help if u can and thank you very much. Here's a copy of the log. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 12/20/2003 8:26:59 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero version: 6.3.1.10 (Nero Express) Recorder: <_NEC DVD_RW ND-1300A> Version: 1.05 - HA 1 TA 1 - 6.3.1.10 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <JLMS XJ-HD166S >Version: DTS5 - HA 1 TA 0 - 6.3.1.10 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD800EB-11DJF0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 0 DMA: Off CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === JLMS XJ-HD166S D: CDRom0 _NEC DVD_RW ND-1300A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 39845888 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 247MB (253424kB) Free physical memory: 53MB (54376kB) Memory in use : 78 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 1.10.2005 UDF/ISO compilation 1:03:35 PM #1 Phase 112 File dlgbrnst.cpp, Line 1841 DVD-Video files reallocation started 1:03:35 PM #2 Phase 114 File dlgbrnst.cpp, Line 1841 DVD-Video files reallocation completed (no file modified) 1:03:36 PM #3 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 1:03:36 PM #4 Phase 111 File dlgbrnst.cpp, Line 1841 DVD-Video files sorted 1:03:36 PM #5 Text 0 File Reader.cpp, Line 118 Reader running 1:03:36 PM #6 Text 0 File Writer.cpp, Line 124 Writer _NEC DVD_RW ND-1300A running 1:03:36 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 1:03:36 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 1:03:37 PM #9 Text 0 File Burncd.cpp, Line 3200 Turn on Disc-at-once, using DVD media 1:03:37 PM #10 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286127 (508:01.52, 4465MB) 1:03:37 PM #11 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 1:03:37 PM #12 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R 1:03:37 PM #13 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:03:37 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [_NEC DVD_RW ND-1300A ] -------------------------------------------------------------- 1:03:37 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [_NEC DVD_RW ND-1300A ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2286128 | lead-out | 1 | 0x00 | 0x41 1:03:38 PM #16 Phase 24 File dlgbrnst.cpp, Line 1841 Caching of files started 1:03:38 PM #17 Text 0 File Burncd.cpp, Line 4210 Cache writing successful. 1:03:38 PM #18 Phase 25 File dlgbrnst.cpp, Line 1841 Caching of files completed 1:03:38 PM #19 Phase 36 File dlgbrnst.cpp, Line 1841 Burn process started at 2.4x (3,312 KB/s) 1:03:38 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 1:03:38 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1185 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03466000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 1:03:38 PM #22 Text 0 File DVDPlusRW.cpp, Line 618 Start write address at LBA 0 DVD high compatibility mode: Yes 1:04:22 PM #23 SCSI -1093 File Cdrdrv.cpp, Line 1439 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04AC0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x11 0xE0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x02 0x00 1:04:22 PM #24 CDR -1093 File Writer.cpp, Line 304 No seek complete 1:04:22 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 1:04:22 PM #26 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 1:04:22 PM #27 SCSI -1135 File Cdrdrv.cpp, Line 1185 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 1:04:22 PM #28 SCSI -1176 File Cdrdrv.cpp, Line 1185 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x72 0x03 1:04:22 PM #29 Phase 127 File dlgbrnst.cpp, Line 1841 Generating DVD high compatibility borders 1:04:22 PM #30 CDR -1135 File WriterStatus.cpp, Line 164 Write error _NEC DVD_RW ND-1300A\H1 T1 1:04:22 PM #31 TRANSFER -24 File WriterStatus.cpp, Line 164 Could not perform end of Disc-at-once 1:04:22 PM #32 Phase 38 File dlgbrnst.cpp, Line 1841 Burn process failed at 2.4x (3,312 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=5.3.4.21, size=23436 bytes, created 12/17/2002 12:32:46 PM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 12/20/2003 8:26:58 PM File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 9:24:08 AM File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 1:27:50 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
hi, and welcome to the forum... - too old, update to latest, 6.6.0.16 - wow, that firmware is out of the bible, 1.0C is here (you're 7 versions behind!) - http://forum.rpc1.org/dl_firmware.php?download_id=1517 - DMA needs to be ON, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm - 256MB is barely sufficient for XP, never mind DVD work on top. 512MB is what i consider the minimum for DVD work - you're burnignto outer edge of discs. If you use DVD Shrink, set target size in Shrink's preferences to 4300MB, avoiding outer edge of discs and not sacrificing much space - your firmware is out of date, thus not recognising your media. update the firmware. this is an example of what you see when firmware's up to date, this kind of 3liner - - see previous comments - that's Roxio, which doesn't play well with Nero, uninstall it. To eradicate it completely You may have to google search for Roxio Zapper
Oh my god creaky you are like the best. hehe. Thank u very much for your help. After following your suggestions, it works now. Now i just need better memory like u suggested 512 mb. I'm so stupid when it comes to computers so i need to ask someone how to do that. But once again, thank you very much.
no worries, glad it helped. as to adding memory, it's simply a case of finding out what sort of memory you already have and how that 256MB is made up, ie if it's 2x 128MB or a single 256MB stick, have you got enough spare memory slots to add the other 256MB or do you need to take out what you have (amd sell it) and replace with a 512MB stick or 2x 256MB sticks etc etc.... we can look at that sometime if you like
Hi Creaky, guess what my Nero stopped working again. I'm wondering if it's Nero or the computer since now my dvd shrink is running really slow too. And sometimes dvd decrypter just closes by itself when i'm decrypting. Ok back to Nero, it will burn to 100 percent but then it would say burn failed and etc. Do u think it has to do with the memory but it was never a problem before? Could u pls offer any advice? Thanks a lot. Here's the log Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 12/20/2003 8:26:59 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0C - HA 1 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <JLMS XJ-HD166S >Version: DTS5 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD800EB-11DJF0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === JLMS XJ-HD166S D: CDRom0 _NEC DVD_RW ND-1300A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 39845888 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 247MB (253424kB) Free physical memory: 53MB (54432kB) Memory in use : 78 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 3.10.2005 DVD-Copy on the fly 9:14:44 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 9:14:44 PM #2 Text 0 File Writer.cpp, Line 122 Writer _NEC DVD_RW ND-1300A running 9:14:44 PM #3 Text 0 File DVDCopy.cpp, Line 293 DVD Track-Information from source disc: Media Type: DVD-R S01 T01 Con 0x04 Start 0 Len 2017824 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 9:14:44 PM #4 Text 0 File DVDCopy.cpp, Line 406 Max -1 tracks of 1 allowed to copy 1: 0 - 2017824 = 2017824, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 9:14:44 PM #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 9:14:44 PM #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2017823 (448:24.23, 3941MB) 9:14:44 PM #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 9:14:44 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: _NEC DVD_RW ND-1300A, Media type: DVD+R 9:14:44 PM #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:14:44 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2017824 (2017824) = #2017824/448:24.24 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2017824 blocks [_NEC DVD_RW ND-1300A] -------------------------------------------------------------- 9:14:44 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4132503552, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2017824 | lead-out | 1 | 0x41 | 0x00 9:14:44 PM #12 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 9:14:45 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 9:14:45 PM #14 SCSI -1066 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x09020600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 9:14:45 PM #15 Text 0 File DVDPlusRW.cpp, Line 665 Start write address at LBA 0 DVD high compatibility mode: Yes 9:27:22 PM #16 Text 0 File WriterStatus.cpp, Line 116 <_NEC DVD_RW ND-1300A > start writing Lead-Out at LBA 2017824 (1ECA20h), lenght 0 blocks 9:27:22 PM #17 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:27:54 PM #18 SCSI -1093 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x02 0x00 9:27:54 PM #19 SCSI -1176 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x72 0x03 9:27:54 PM #20 CDR -1093 File ThreadedTransferInterface.cpp, Line 1909 No seek complete _NEC DVD_RW ND-1300A\H1 T1 9:27:54 PM #21 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1909 Could not perform end of Disc-at-once 9:28:10 PM #22 SCSI -1093 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x02 0x00 9:28:10 PM #23 SCSI -1176 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x72 0x03 9:28:10 PM #24 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 9:28:10 PM #25 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 9:28:10 PM #26 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 12/20/2003 8:26:58 PM File 'WNASPINT.DLL': Ver=V1.20, size=57344 bytes, created 2/4/2003 9:24:08 AM File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 1:27:50 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
hi. - even though your firmware is up to date, your burner's still not recognising the media. I suspect you're trying to use 8x or higher media, that the firmware just can't cope with as the media is too new for the firmware to understand. (i do know this burner can do 4x max so i'm guessing it's firmware was never really gonna cater for much newer discs). i think that's your main problem (obviously your burner may be playing up, but the point of this troubleshooting is to do what we can with what we have). The low memory is definitely a factor, but i think here the firmware's the biggest problem. There's nothing we can do to get that particular media to work on this burner, however it would be nice to find out what media you're trying to use. download dvd identifier (free) - http://www.afterdawn.com/software/video_software/dvd_tools/dvd_identifier.cfm, use it to 'identify' one of those problem discs and paste the results here.. The ultimate solution is to use 4x discs, that way the firmware can correctly use them, add more memord, and if all else fails, get another burner. but let's see what the dvd identifier shows...
This is from the owners manual for that drive. 2.3.3 DVD WRITABLE MEDIA a) DVD-R Media (4x/2x, 4.7GB For General DISC) Mitsubishi (Verbatim). Taiyo-Yuden. PVC. Fuji Film. Ritck b) DVD-RW Media (2x/lx) JVC. Pioneer. Mitsubishi (Verbatim). TDK c) DVD+R Media (4x/2.4x) RICOH. Mitsubishi (Verbatim). Taiyo-Yuden. Sony d) DVD+RW Media (2.4x) RICOH. Mitsubishi (Verbatim). TDK e) DVD-R W+RW Rewrite 1000 times
Hi Creaky, i just wanted to say thx for all your help. Everything is working now but i had to get my computer fixed because it went bananas on me and the hard drive was all screwed up. But now everything is working and i got someone to add more memory to my computer. I just wanted to say i really appreciate your help. Thanks a lot.
