never had this problem before, but when i burn any type of dvd i get errors once the process hits 100%. i'll include the log, thx Daniel K. Bond 1A23-3072-8045-7509-9605-6424 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A304 - HA 1 TA 3 - 6.6.0.16 Adapter driver: <nvatabus> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <AXV CD/DVD-ROM >Version: 2.0B - HA 0 TA 0 - 6.6.0.16 Adapter driver: <a347scsi> HA 0 === Scsi-Device-Map === CdRomPeripheral : AXV CD/DVD-ROM 2.0B a347scsi Port 0 ID 0 DMA: Off DiskPeripheral : Maxtor 5T020H2 nvatabus Port 1 ID 0 DMA: Off DiskPeripheral : ST320430A nvatabus Port 1 ID 1 DMA: Off CdRomPeripheral : HL-DT-ST CD-RW GCE-8526B nvatabus Port 1 ID 2 DMA: Off CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B nvatabus Port 1 ID 3 DMA: Off CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 0 DMA: Off === CDRom-Device-Map === AXV CD/DVD-ROM H: CDRom3 HL-DT-ST CD-RW GCE-8526B E: CDRom5 HL-DT-ST DVDRAM GSA-4040B F: CDRom1 NERO IMAGEDRIVE2 G: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 767MB (785904kB) Free physical memory: 505MB (517128kB) Memory in use : 34 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 3.10.2005 Burn DVD Image 4:52:53 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 4:52:53 PM #2 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-4040B running 4:52:53 PM #3 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 4:52:53 PM #4 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2128597 (473:01.22, 4157MB) 4:52:53 PM #5 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 4:52:53 PM #6 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 4:52:53 PM #7 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:52:53 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2128598 (2128598) = #2128598/473:1.23 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2128598 blocks [HL-DT-ST DVDRAM GSA-4040B] -------------------------------------------------------------- 4:52:53 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4359368704, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2128598 | lead-out | 1 | 0x41 | 0x00 4:52:54 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 4:52:54 PM #11 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 4:52:54 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 4:52:54 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 4:52:54 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 4:52:54 PM #15 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode 4:52:54 PM #16 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Buffer underrun protection -> ON 4:52:54 PM #17 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 0 DVD high compatibility mode: Yes 4:52:54 PM #18 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 30 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 .0.............. 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 4:53:30 PM #19 Text 0 File Cdrdrv.cpp, Line 1286 16:53:30.593 - HL-DT-ST DVDRAM GSA-4040B\H1 T3 : Queue again later 5:06:58 PM #20 Text 0 File WriterStatus.cpp, Line 116 <HL-DT-ST DVDRAM GSA-4040B> start writing Lead-Out at LBA 2128598 (207AD6h), lenght 0 blocks 5:06:58 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 5:06:58 PM #22 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 2128591 5:07:40 PM #23 SCSI -1122 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 3, LUN 0, buffer 0x03894A00 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x57 Sense Qual: 0x00 CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10 0x32 0x3F 0x03 0x0C 0x57 0x00 5:08:06 PM #24 CDR -1122 File ThreadedTransferInterface.cpp, Line 1909 Unable to recover TOC 5:08:06 PM #25 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1909 Could not perform end of Disc-at-once 5:08:06 PM #26 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was -1 5:08:30 PM #27 CDR -201 File WriterStatus.cpp, Line 167 Invalid write state HL-DT-ST DVDRAM GSA-4040B\H1 T3 5:08:30 PM #28 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 5:08:30 PM #29 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\nvatabus.sys': Ver=5.10.2600.0446 built by: WinDDK, size=79360 bytes, created 6/3/2004 10:40:46 AM (Adapter driver for rec) File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 4/30/2004 9:33:00 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
1A23 firstly edit your serial number before it gets stolen. Bus Type : default (0) -> ATAPI, detected: ? are you using an external burner? CdRomPeripheral : AXV CD/DVD-ROM 2.0B a347scsi Port 0 ID 0 DMA: Off DiskPeripheral : Maxtor 5T020H2 nvatabus Port 1 ID 0 DMA: Off DiskPeripheral : ST320430A nvatabus Port 1 ID 1 DMA: Off CdRomPeripheral : HL-DT-ST CD-RW GCE-8526B nvatabus Port 1 ID 2 DMA: Off CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B nvatabus Port 1 ID 3 DMA: Off CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 0 DMA: Off you need to enable dma Disc Manufacturer: CMC MA - G. AE1 these are in my opinion the worst discs you can buy and you will find this is more likely your problem.recommend sony,ty or verbatim. TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) as above very bad media
the burner is internal (LG), and i've been using these discs for a couple months and had no problems whatsoever until recently, so i doubt it's the discs all of the sudden. sounds like this is a stumper
sorry for the posting, but i did re-install windows about a week ago, wxp pro sp2. don't know if that helps
@dkbond - as mybarras pointed out, there are a few things that need fixing in your setup, but all of that will only work for a while as those media are indeed, utter atrocious rubbish. the whole point is that they are inconsistet, you will have some success with them, then they will let you down - substandard manufacture, pure and simple i'm afraid..
i upgraded the firmware from a304 to a112 and it works fine now, should have done that in the first place. thx for the help though...
no worries, but if you continue to use those discs then i/we guarantee you'll be back here at some point
