Originally posted by decomullo:
Originally posted by oggnogg:
Originally posted by cactikid:
Originally posted by oggnogg:
Hi have a digivox in dublin anyone know how to get it running again i put the new codes in but it still scambled
look in library in your house lol
LOL i have tryed everything out of there and still wont work
LATEST CODES IRELAND
CHOR*S IRELAND 3rd April
00 = A0 12 65 BD 72 33 FB BC
01 = C0 FE 0D FB 2C A4 B0 FB
N*L IRELAND 3rd April
00 = 5B 74 36 A3 B2 30 CB 46
01 = 54 0D 81 09 F9 6E 17 F9
LATEST CODES UK
N*L UK: 17th March
00 = 46 90 D1 03 AC 3A 95 E3
01 = E8 68 6D 9C 41 4F 09 ED
Ex C&W 17th March
00 = 09 C0 06 EC AA 7E F6 42
01 = 51 5B 28 11 F2 F0 9D 5E
Telwest
00 = 4C D8 A0 68 F0 40 6A 24
01 = 2D CA CE 92 1C F8 52 3E
try these, can you get the normal stations when you put your cable through the box? deco
For all who need help with digiVox's
here is a tutorial for set up !
How to Load Firmware.
1. Insert CD
2. Save all files into a folder or onto your desktop. Drag and drop
3. Remove CD
4. Turn off PC.
5. Connect PC to Digivox via the serial port using an RS232 cable.
6. Turn on Digivox & then turn on PC.
7. Open loader software “DOWNLOADER 10”
8. Check settings and parameters. Defaults are usually correct.
9. Browse for bin file (digivox_z20070101_v2500_api )
For all files and the downloader 10 click this link
http://eko.4shared.com/ and hit digivox
and select.
10. Check “app file” (default).
11. Click “download”
12. A progress bar will appear. Wait for “download complete “ window to pop-up
13. Turn off Digivox and PC then disconnect.
Enabling Key Emulator
1. Connect Digivox to TV (usually scart), cable feed and power on.
2. Perform full auto-scan.
3. Go to “main menu”
4. Scroll down to “System Information”, press “OK” to enter System Information menu.
5. On your remote control press “ 1 0 0 4 ” (ignore what happens on the screen)
6. “Key Emu” will now be visible on the screen.
7. Change “Key Emu” to ON
8. Exit menus and return to TV mode.
9. Go to a scrambled / encrypted channel and wait for update process to complete.
10. Scrambled channels should now be unlocked.
Problems with no sound
To get back sound on e4 sky1 ect just select the channel in question press menu, select installation, select manual scan, click ok on down frequency. It'll now scan for channels when its finished exit back to normal tv viewing screen go to the end of your channel listing and the desired channel will be there with sound. This can be done on any channel with no sound by just selecting that channel following the instructions above.
Frequency change fix
1 Menu
2 Factory settings
3 type in code ( 0000)
4 press ok. this will delete channels.
5 Then Hit Installation
6 Change provider (Eg n*L etc)to which ever one used in your area.
7 autoscan ( when it says *** channels found , exit back out all the way until u are back at the scrambled/no signal 'tv' screen)
8 Hit menu again
9 go into sysrem information
10 press info on remote and type in 1004
11 new screen appears , change EMU to on
Then exit back out all the way until u are back at the scrambled/no signal 'tv' screen and hey presto your sorted !
